Best picks

9 Best Anchors for Jon Boats (November 2026)

Updated on · By the Fish Finder Critic team

The best jon boat anchors include the Attwood Boat Mushroom Anchor for soft mud and weed bottoms, the Scotty #276 Anchor Lock for still water line control, and the Seachoice Utility Anchor with Slip Ring Shank for sand and varied lake bottoms.

On this page (9 sections)
  1. Jon boat anchors matched to bottom type and current
  2. How the best anchor for jon boat picks compare
  3. How we compared jon boat anchors
  4. What weight anchor does a jon boat need?
  5. Which anchor type holds best in mud, sand and rock?
  6. Do you need chain, rope and shackles with your anchor?
  7. How do you store a jon boat anchor without scratching the boat?
  8. What extras help jon boat anchoring on a small boat?
  9. Verdict: pick the best anchor for jon boat by your water

The best anchor for jon boat use depends on your water, and for most anglers that means a mushroom anchor in a calm lake or a river anchor in moving water. A jon boat has a flat bottom and light weight, so it moves in wind and current faster than a deep hull boat.

You need enough weight to hold, but not so much that lifting it hurts your back or fills your small bow storage.

Our score weighs specs, features and buyer feedback against what you are shopping for. We compared the picks below by weight, bottom type, included parts and how they set and release in daily use.

Our picks at a glance

  1. 1 Attwood Boat Mushroom Anchor
    Best for soft mud and weed bottoms

    Attwood Boat Mushroom Anchor

    9.7/10 our score

    See it on Amazon
  2. 2 Scotty #276 Anchor Lock
    Best for still water line control

    Scotty #276 Anchor Lock

    9.7/10 our score

    See it on Amazon
  3. 3 Seachoice Utility Anchor with Slip Ring Shank
    Best for sand and varied lake bottoms

    Seachoice Utility Anchor with Slip Ring Shank

    9.6/10 our score

    See it on Amazon
  1. 4SEACHOICE River Anchor

    SEACHOICE River Anchor

    Best for rivers and rocky bottoms
    Check it
  2. 5AmarinePlay River Anchor Kit

    AmarinePlay River Anchor Kit

    Best complete river anchor kit
    Check it
  3. 6JY PERFORMANCE 5/8/10/13 lb Boat Anchor Kit

    JY PERFORMANCE 5/8/10/13 lb Boat Anchor Kit

    Best fluke kit for 12 to 22 ft boats
    Check it
  4. 7CHERAINTI Kayak Anchor

    CHERAINTI Kayak Anchor

    Best compact folding grapnel anchor
    Check it
  5. 8AmarinePlay 5/8.5/10/13lb Boat Anchor Kit Fluke DanforthCheck it
  6. 9MARINE SYSTEM Anchor Kit Fluke Anchor

    MARINE SYSTEM Anchor Kit Fluke Anchor

    Best budget fluke kit for river fishing
    Check it

Jon boat anchors matched to bottom type and current

A mushroom anchor suits soft bottoms, a river anchor suits current, and a fluke anchor suits sand and mud where it can dig. A grapnel suits small boats and rocky bottoms where you want a compact fold-away option.

1

Attwood Boat Mushroom Anchor: Best for soft mud and weed bottoms

Attwood Boat Mushroom Anchor, jon boat anchors
9.7/10Our score
  • 8 lb cast iron mushroom anchor
  • Black PVC coating
  • Large steel eye
  • Wide-area mushroom design

An 8 lb mushroom anchor with a wide cup for mud and weedy bottoms. The PVC coating helps protect hull and deck surfaces.

See it on Amazon

Pros

  • Wide contact area in soft bottoms
  • Coated to reduce scratches
  • Large eye for rope or chain

Cons

  • Only anchor, no rope or chain included
  • Limited hold in strong current

The Attwood suits a jon boat owner who fishes calm lakes, ponds and slow bays with mud, silt or weeds on the bottom. Its 8 lb weight is light enough to haul by hand from a small bow, yet heavy enough for a lightweight fishing boat.

The wide mushroom cup increases surface contact where a fluke would slide. That contact is what keeps a flat bottom boat from creeping across a soft bottom when wind pushes on the hull.

Attwood uses cast iron with a black PVC coating. The coating helps protect the deck and hull from scratches when the anchor is stored or lifted, and it reduces exposure to corrosion in freshwater and saltwater.

A large steel eye makes it simple to tie rope or add a chain leader. You can start with rope alone in calm water, then add chain later if the anchor drags in a breeze.

The trade-off is scope. This is the anchor alone, with no rope, chain or shackle in the box.

Pair it with the line you already own, or choose a full kit below if you want everything at once.

Attwood Boat Mushroom AnchorCheck it on Amazon
2

Scotty #276 Anchor Lock: Best for still water line control

Scotty #276 Anchor Lock, jon boat anchors
9.7/10Our score
  • Anchor lock with #241 side/deck mount
  • Roller bearing operation
  • For rope up to 1/2 in diameter
  • Mount dimensions 4 x 2 x 2 in

A lock system for small boats in still water. It lets you adjust line with one hand and lock it in place.

See it on Amazon

Pros

  • One-hand line adjustment
  • Includes side/deck mount
  • Smooth roller bearing action

Cons

  • Rope not included
  • Not an anchor by itself

The Scotty suits a jon boat owner who fishes still water and wants to adjust depth without leaving the seat. It is not an anchor, it is a lock system that controls your anchor line from the side or deck.

The included #241 combination mount fits a flat deck, a gunnel or a transom. Mount dimensions are 4 x 2 x 2 in, so check your flat surface before you drill.

Roller bearing construction gives smooth, quiet operation. Easy lock and release action lets you feed line out to reach a spot, then lock it off while you cast.

It works with rope up to 1/2 in diameter, and the rope is not included. That makes it a good add-on if you already have a mushroom or river anchor and want finer control.

The trade-off is use case. On a river with current, a lock will not hold the boat by itself.

You still need an anchor that can set in that bottom and current.

Scotty #276 Anchor LockCheck it on Amazon
3

Seachoice Utility Anchor with Slip Ring Shank: Best for sand and varied lake bottoms

Seachoice Utility Anchor with Slip Ring Shank, jon boat anchors
9.6/10Our score
  • Hot-dipped galvanized steel or PVC coated
  • Slip ring shank
  • Fluke length 9-1/16 in
  • Stock width 12-5/8 in

A utility fluke anchor that penetrates varied bottoms. The slip ring shank helps free a stuck anchor for retrieval.

See it on Amazon

Pros

  • Deep penetration in varied bottoms
  • Slip ring aids retrieval
  • Sized for 15-19 ft boats

Cons

  • Anchor only, no rope or chain
  • Fluke shape needs a clean set

The Seachoice suits a jon boat in the 15 to 19 ft range that fishes lakes with sand, mud or mixed bottoms. Its fluke design penetrates deep where a mushroom anchor would only sit on top.

Fluke length is 9-1/16 in and stock width is 12-5/8 in. Those dimensions help the anchor dig when you back down and set it, then hold as wind shifts.

The slip ring shank makes retrieval simpler if the anchor sticks. As you pull, the ring can help trip the anchor free instead of forcing you to motor over it.

Seachoice offers hot-dipped galvanized steel or PVC coated versions in multiple sizes. Galvanized steel resists rust for long term use, while a coating can help protect the boat.

The trade-off is bottom dependence. A fluke needs a bottom it can enter.

On hard clay, rock or thick weed mat, it may set poorly compared with a river anchor.

Seachoice Utility Anchor with Slip Ring ShankCheck it on Amazon
4

SEACHOICE River Anchor: Best for rivers and rocky bottoms

SEACHOICE River Anchor, jon boat anchors
9.4/10Our score
  • 12 lb black vinyl coated cast iron
  • Galvanized shackle included
  • Designed for mud, rock, gravel and sand
  • Large rope eye

A 12 lb river anchor built to penetrate better than a regular mushroom anchor. It holds in mud, rock, gravel and sand.

See it on Amazon

Pros

  • Strong hold in current
  • Vinyl coating protects the boat
  • Shackle included

Cons

  • Heavy for a small jon boat
  • No rope included

The SEACHOICE suits a jon boat owner who fishes rivers, creeks and current-swept lakes. At 12 lb, it is the anchor to choose when an 8 lb mushroom drags in moving water.

The river design is built to penetrate the bottom better than a regular mushroom anchor. Seachoice says it holds in mud, rock, gravel and sand, which covers most river bottoms you will meet.

Black vinyl coated cast iron protects the boat from scratches and helps resist corrosion. A large rope eye makes line attachment straightforward in cold or wet hands.

A galvanized shackle is included for secure anchor line attachment. That saves a separate purchase and gives you a proper connection point instead of a simple knot.

The trade-off is weight. At 11.88 lb, it is heavy to lift repeatedly from a low jon boat bow.

If you fish only calm lakes, a lighter mushroom anchor is easier to handle.

SEACHOICE River AnchorCheck it on Amazon
5

AmarinePlay River Anchor Kit: Best complete river anchor kit

AmarinePlay River Anchor Kit, jon boat anchors
8.9/10Our score
  • 12 lb river anchor for boats up to 18 ft
  • 30 ft 6 mm rope
  • M10 bow shackle and M8 spring hook
  • Float ball included

A 12 lb river anchor kit with rope, shackle, spring hook and float ball. The three-claw mushroom shape holds in mud, sand, gravel and rocky bottoms.

See it on Amazon

Pros

  • Complete ready to use kit
  • Holds in current and wind
  • Coating resists scratches and rust

Cons

  • 12 lb is heavy for the smallest boats
  • 30 ft rope may be short in deep water

The AmarinePlay suits a jon boat owner who wants a complete river kit without buying parts separately. The 12 lb anchor is rated for boats up to 18 ft, which covers most jon boats.

The mushroom shaped body with three claws holds in mud, sand, gravel and rocky bottoms. AmarinePlay says it resists drag in moving river water, current, wind and choppy water.

The kit includes 30 ft of 6 mm rope, an M10 stainless steel bow shackle, an M8 stainless steel spring hook, a scratch-resistant ring and a float ball. You can rig it and go.

Heavy-duty cast iron with PVC vinyl coating helps protect the hull and deck and resists rust and corrosion in freshwater. The one-piece design is made to reduce friction on underwater obstructions during deployment and retrieval.

The trade-off is rope length. At 30 ft, it suits shallow rivers and lakes, but deep water may need more scope.

Check your deepest fishing spot before you rely on this length alone.

AmarinePlay River Anchor KitCheck it on Amazon
6

JY PERFORMANCE 5/8/10/13 lb Boat Anchor Kit: Best fluke kit for 12 to 22 ft boats

JY PERFORMANCE 5/8/10/13 lb Boat Anchor Kit, jon boat anchors
8.7/10Our score
  • 8 lb galvanized fluke anchor
  • 6.5 ft steel chain
  • 100 ft nylon rope
  • 2 D-ring shackles

An all-in-one fluke anchor kit for boats from 12 to 22 ft. The chain adds weight at the bottom and helps the fluke dig in.

See it on Amazon

Pros

  • Chain, rope and shackles included
  • Long 100 ft rope
  • Galvanized steel resists rust

Cons

  • Fluke needs sand or mud to dig
  • Kit weight is higher than an anchor alone

The JY PERFORMANCE suits a jon boat owner who wants a fluke anchor with chain and rope in one box. The 8 lb anchor fits boats from 12 to 22 ft, which includes many jon boats and small fishing boats.

Hot-dipped galvanized steel resists rust, corrosion and wear in saltwater and freshwater. The fluke is designed to dig deep into sand or mud, while the weighted chain adds grip at the bottom.

The kit includes 6.5 ft of steel chain, 2 D-ring shackles and 100 ft of nylon rope. That long rope gives you scope for deeper water and better holding power.

Nylon rope offers stretch resistance and tensile strength, and it is soft to handle. The chain can also protect the rope from abrasion where it meets the bottom.

The trade-off is storage and weight. A full kit takes more space in a small jon boat than an anchor alone.

If space is tight, a mushroom anchor with your own short rope may be simpler.

JY PERFORMANCE 5/8/10/13 lb Boat Anchor KitCheck it on Amazon
7

CHERAINTI Kayak Anchor: Best compact folding grapnel anchor

CHERAINTI Kayak Anchor, jon boat anchors
8.4/10Our score
  • 3.5 lb folding grapnel anchor
  • 40 ft 6 mm rope
  • Marker buoy and carabiner
  • Drawstring storage bag

A 3.5 lb folding grapnel kit that packs to 12 x 3 in. The buoy marks the anchor line for easier retrieval.

See it on Amazon

Pros

  • Packs small for storage
  • Holds in sand, mud, weeds and gravel
  • Buoy aids retrieval

Cons

  • Light for a jon boat in wind
  • Grapnel can snag on debris

The CHERAINTI suits a small jon boat, kayak or canoe owner who wants a compact anchor that stores almost anywhere. At 3.5 lb, it is the lightest pick here and it folds to just 12 x 3 in.

The four-prong grapnel design opens by sliding a collar up, then locks by sliding the ring down. It grips in sand, mud, weeds, gravel and rocky bottoms.

The kit includes a 40 ft marine-grade rope, a bright yellow marker buoy, a stainless steel carabiner and a drawstring storage bag. The buoy keeps the line visible for easier location and retrieval.

Rust-resistant coated metal helps it handle saltwater as well as freshwater. The bag protects your kayak or small boat from scratches during transport.

The trade-off is holding power. A 3.5 lb grapnel is best for calm water and light wind on a very small craft.

On a larger jon boat in wind or current, it will drag where a 12 lb river anchor would hold.

CHERAINTI Kayak AnchorCheck it on Amazon
8

AmarinePlay 5/8.5/10/13lb Boat Anchor Kit Fluke Danforth: Best Danforth kit with size choices

AmarinePlay 5/8.5/10/13lb Boat Anchor Kit Fluke Danforth, jon boat anchors
8.2/10Our score
  • 5, 8.5, 10 or 13 lb Danforth anchor
  • 5/16 in x 6.5 ft chain
  • 5/16 in x 100 ft nylon rope
  • 2 D-ring shackles and float ball

A Danforth fluke kit in four weights for boats from 8 to 32 ft. Sharp flukes dig quickly into sand, mud and clay.

See it on Amazon

Pros

  • Four weights to match boat size
  • Chain and rope included
  • Float ball marks the line

Cons

  • Needs a firm set in the bottom
  • Heavier kits take more storage space

The AmarinePlay Danforth kit suits a jon boat owner who wants to match weight to boat size. It offers 5, 8.5, 10 and 13 lb options for boats from 8 to 32 ft.

The 5 lb size fits small jon boats and dinghies, the 8.5 lb fits 13 to 24 ft boats, the 10 lb fits 16 to 26 ft boats, and the 13 lb fits 20 to 32 ft boats. Pick the weight for your boat length and your typical wind and current.

Sharp Danforth flukes dig quickly into sand, mud and clay. AmarinePlay says the combination of flukes, weight and chain keeps the boat steady in wind, current and river.

The kit includes a 5/16 in x 6.5 ft chain, 5/16 in x 100 ft nylon rope, 2 D-ring shackles and a float ball. Anti-breakaway shackles help avoid accidental detachment under load.

The trade-off is set time. A Danforth needs to dig and set properly before it holds at full strength.

In hard bottoms or thick weeds, a river anchor may be the better first choice.

AmarinePlay 5/8.5/10/13lb Boat Anchor Kit Fluke DanforthCheck it on Amazon
9

MARINE SYSTEM Anchor Kit Fluke Anchor: Best budget fluke kit for river fishing

MARINE SYSTEM Anchor Kit Fluke Anchor, jon boat anchors
8.0/10Our score
  • 8 lb hot dipped galvanized fluke anchor
  • 3/8 in x 75 ft nylon rope
  • 6.5 ft of 1/4 in chain
  • 2 pcs 5/16 in shackles

An 8 lb fluke anchor kit with chain, rope and shackles for boats from 12 to 22 ft. It suits river or current fishing in sand or mud.

See it on Amazon

Pros

  • Complete kit in one box
  • Chain improves bottom grip
  • Galvanized finish resists corrosion

Cons

  • Shorter rope than some kits
  • Fluke hold depends on bottom type

The MARINE SYSTEM suits a jon boat owner 12 to 22 ft who wants a complete fluke kit for river or current fishing. The 8 lb hot dipped galvanized fluke anchor digs into sand or mud.

The kit includes 3/8 in x 75 ft nylon rope with a marine grade stainless steel thimble, 6.5 ft of 1/4 in hot dipped galvanized chain and 2 pcs of 5/16 in hot dipped galvanized shackles.

Chain weight helps the fluke stay down and dig, and it protects the rope from bottom abrasion. The thimble at the rope end helps the connection hold its shape.

This is a straightforward kit with no extra parts to buy for a standard setup. It covers the anchor, the chain leader, the rope and the connections.

The trade-off is rope length and bottom type. At 75 ft, it is shorter than the 100 ft kits here, and a fluke still needs sand or mud to reach full hold.

On rock or hard clay, test the set before you trust it in current.

MARINE SYSTEM Anchor Kit Fluke AnchorCheck it on Amazon

How the best anchor for jon boat picks compare

The top picks split by job, not by brand. Mushroom anchors win in soft bottoms, river anchors win in current, fluke anchors win in sand and mud, and a grapnel wins on compact storage.

ProductBest forWeightMaterialBottom typeOur score
Attwood Boat Mushroom Anchorsoft mud and weed bottoms8 lbCast ironMud, silt and weeds9.7
Scotty #276 Anchor Lockstill water line control9.7
Seachoice Utility Anchor with Slip Ring Shanksand and varied lake bottoms9.6
SEACHOICE River Anchorrivers and rocky bottoms12 lbVinyl coated cast iron9.4
AmarinePlay River Anchor Kitcomplete river anchor kit12 lb8.9
JY PERFORMANCE 5/8/10/13 lb Boat Anchor Kitfluke kit for 12 to 22 ft boats8.7
CHERAINTI Kayak Anchorcompact folding grapnel anchor3.5 lb8.4
AmarinePlay 5/8.5/10/13lb Boat Anchor Kit Fluke DanforthDanforth kit with size choices8.2
MARINE SYSTEM Anchor Kit Fluke Anchorbudget fluke kit for river fishing8.0

For a calm lake with mud or weeds, the Attwood mushroom anchor gives you wide contact without a heavy lift. For a river with current, the 12 lb SEACHOICE or the AmarinePlay river kit gives you weight and penetration.

For a lake with sand, the Seachoice utility anchor or a fluke kit gives you a digging hold. For one-hand depth control in still water, the Scotty lock adds control to any anchor you already own.

Price tier here is budget to mid-range, and the difference is mostly what is in the box. An anchor alone costs less up front, while a kit adds chain, rope and shackles you would sonst buy separately.

Avoid that word in your own notes, and instead buy the parts you need in one trip.

How we compared jon boat anchors

We compared specs, features and buyer feedback against what a jon boat searcher needs. We checked weight, bottom type, included parts, coating and size limits for each pick.

We looked at how each anchor sets, how it releases, and how much storage it needs in a small flat bottom boat. We also checked whether rope, chain and shackles are included or must be bought separately.

We did not test these anchors in the water. Our score weighs the listed specs and features and how well they fit jon boat use in rivers, lakes and bays.

Start with our boat anchor guide if you want a broader look at anchor types before you choose. That guide explains scope, chain and bottom types in more detail.

What weight anchor does a jon boat need?

A jon boat usually needs 8 to 12 lb of anchor weight for most fishing. Choose 8 lb for calm lakes and small boats, and 12 lb for rivers, wind and larger jon boats.

Weight alone does not guarantee hold. Bottom type matters as much as pounds on the scale.

A mushroom anchor in mud can out-hold a heavier fluke that cannot dig in.

How to choose weight for calm lakes

In calm lakes with soft bottoms, an 8 lb mushroom anchor is often enough for a lightweight jon boat. The wide cup spreads weight over more surface, which helps in mud and silt.

Add chain if wind pushes your boat across the surface. Chain adds weight at the bottom and helps the anchor stay down when the boat pulls at an angle.

How to choose weight for rivers and current

In rivers and current, move to 12 lb. Current adds force all the time, not just in gusts, so your anchor needs more mass and better penetration.

It helps to read our best river anchor for boat guide for current-specific tips. That guide covers how river anchors differ from regular mushroom anchors.

Which anchor type holds best in mud, sand and rock?

A mushroom anchor holds best in mud and silt, a fluke holds best in sand and mud, and a river anchor covers mud, rock, gravel and sand. A grapnel fits rocky bottoms on very small craft.

No single anchor holds best everywhere. Match the shape to the bottom you fish most, not the bottom you fish once a year.

Mushroom anchors for soft bottoms

Mushroom anchors use a wide cup to increase surface contact. That design works in mud, silt and weeds where a fluke would slide or clog.

For more mushroom options, see our best mushroom anchors for boats roundup. It compares sizes and coatings for small boats.

Fluke and Danforth anchors for sand and clay

Fluke and Danforth anchors dig with sharp flukes. They need a bottom they can enter, and they reward a proper set with a strong hold.

If you plan to fish sand flats or clay banks, a fluke kit with chain is often the best anchor for jon boat use in those spots.

River anchors for mixed river bottoms

River anchors combine weight with a shape that penetrates mud, rock, gravel and sand. That mix makes them a safe default if you fish both lakes and rivers.

Do you need chain, rope and shackles with your anchor?

Most jon boat owners need chain, rope and shackles to make an anchor work well. Chain adds bottom weight, rope gives you scope, and shackles connect the parts safely.

An anchor alone is only part of the system. Without rope you cannot use it, and without chain your anchor may drag in wind.

What chain does for holding power

Chain lies on the bottom and adds weight where it helps. It also protects rope from abrasion on rock, gravel and debris.

Most kits here include 6.5 ft of chain. That length is a practical starting point for small boats in lakes and rivers.

Rope length and scope

Scope is the length of line from boat to anchor. More scope means a flatter pull angle and a better hold in wind and current.

A 100 ft rope gives you more options in deep water than a 30 ft rope. Match rope length to your deepest fishing spot, then add extra for windy days.

If you want everything in one box, our best boat anchor kit roundup compares full kits by weight and included parts.

How do you store a jon boat anchor without scratching the boat?

Store a boat anchor in a bucket, box or bag, and keep coated anchors away from bare metal. That habit protects your hull, deck and coating.

A jon boat has little spare space, so a compact bag or a bucket that doubles as storage helps. The CHERAINTI kit uses a drawstring bag for exactly this reason.

For larger anchors, a dedicated box keeps chain from tangling with tackle and line. See our best boat anchor box guide for storage options that fit small boats.

Rinse anchors with fresh water after saltwater use, and let them dry before storage. That step slows corrosion on cast iron and galvanized steel.

What extras help jon boat anchoring on a small boat?

A pulley system, a lock, a light and a good battery setup can all make anchoring safer and easier. Each extra solves a different problem on a small boat.

A pulley system lets you raise and lower a heavy anchor from the bow without reaching over the side. Read our best jon boat anchor pulley system guide before you drill or mount anything.

An anchor lock like the Scotty lets you adjust line with one hand in still water. That is useful when you are alone, casting, and want to move a few feet at a time.

At night, a proper anchor light keeps you legal and visible. See our best pontoon bimini anchor light guide for light options, even if your jon boat has no bimini.

Power for lights and electronics matters on long days. Our marine battery for boat guide explains sizing for small boats, so your light and fish finder do not drain your starting battery.

Verdict: pick the best anchor for jon boat by your water

Pick the Attwood mushroom anchor if you fish calm lakes with mud and weeds. Pick a 12 lb river anchor if you fish current or mixed river bottoms.

Pick a fluke kit if you fish sand and mud and want chain and rope included.

Pick the Scotty lock as an add-on for still water control, and pick the CHERAINTI grapnel only for very small craft in calm water. That decision rule covers most jon boat owners without guessing.

Next, check your deepest water, your most common bottom type and your bow storage space. Those three facts will point you to the right weight and type faster than any brand name.

Our top 3 picks at a glance

  1. 1 Attwood Boat Mushroom Anchor
    Best for soft mud and weed bottoms

    Attwood Boat Mushroom Anchor

    9.7/10 our score

    See it on Amazon
  2. 2 Scotty #276 Anchor Lock
    Best for still water line control

    Scotty #276 Anchor Lock

    9.7/10 our score

    See it on Amazon
  3. 3 Seachoice Utility Anchor with Slip Ring Shank
    Best for sand and varied lake bottoms

    Seachoice Utility Anchor with Slip Ring Shank

    9.6/10 our score

    See it on Amazon