9 Best Fishing Rod Holder Mounting Brackets (November 2026)
The best fishing rod holder mounting brackets include the BigTron Fishing Rod Holder Bracket for 3-rod storage, the JHCJHC No Drill Curtain Rod Brackets-20LB for no-drill indoor use, and the ISURE MARINE Fishing Rod Holder Bracket Wall for 3 marine storage tubes.
On this page (7 sections)
- The best fishing rod holder mounting brackets by use
- How do you match a rod holder bracket to a boat?
- What makes an adjustable rod holder mount useful?
- Should you choose plastic or stainless steel?
- How should you install and care for a mounting bracket?
- What other rod holder parts may you need?
- Verdict: which fishing rod holder mounting bracket should you choose?
The BigTron Fishing Rod Holder Bracket is the best fishing rod holder mounting bracket for most fixed 3-rod storage needs. It holds 3 rods, includes 8 screws, and adds a center gap for lures, pliers or a filet knife.
Your best choice depends on where the holder will go. If you fish from shore, compare rod holders for bank fishing.
A surface-mount rack suits a boat side, wall, truck or kayak crate, while a track bracket makes more sense when you want to move an accessory along an existing rail. For vehicle-specific options, see fishing rod holders for cars.
If you need broader buying advice, start with our guide to best fishing rod holders. For extra reach between a holder and your seat, see the best fishing rod holder extension for boats.
Our picks at a glance
-
1
-
2
Best for no-drill indoor useJHCJHC No Drill Curtain Rod Brackets-20LB
9.6/10 our score
See it on Amazon -
3
Best for 3 marine storage tubesISURE MARINE Fishing Rod Holder Bracket Wall
9.4/10 our score
See it on Amazon
- 4
Check itAmarine Made Multi Tube Fishing Rod Rack
Best for stainless steel storage - 5
Check itBrocraft 45 Degree Track Bracket for Lund
Best for 45-degree boat tracks - 6
Check itHiUmi Adjustable Rotatable Plastic Fishing Rod
Best for adjustable 4-pack storage - 7
Check itBroCraft Alumacraft Boat Rod Holder Mount
Best for Alumacraft AlumaTrac - 8
Check itApaspoil Fishing Rod Holder Bracket with Fishing
Best for 6 fixed holders - 9
Check itrssqzqypy 2Pcs Fishing Rod Holder Bracket Tube
Best for a removable 2-pack
The best fishing rod holder mounting brackets by use
The BigTron is the strongest all-around fixed rack, while the Brocraft brackets are better for compatible boat tracks. The remaining choices focus on stainless steel storage, no-drill household mounting, adjustable holders or larger multi-holder packs.
We compared mounting style, stated materials, holder count, track fit and included hardware. Our score weighs specs, features and buyer feedback against what you're shopping for.
| Product | Best for | Capacity | Mounting | Size | Our score |
|---|---|---|---|---|---|
| BigTron Fishing Rod Holder Bracket | 3-rod storage | 3 rods | Surface mount | 12.4 x 1.97 x 10.63 in | 9.7 |
| JHCJHC No Drill Curtain Rod Brackets-20LB | no-drill indoor use | Wall mount | 9.6 | ||
| ISURE MARINE Fishing Rod Holder Bracket Wall | 3 marine storage tubes | 3 rods | Surface mount | 9.4 | |
| Amarine Made Multi Tube Fishing Rod Rack | stainless steel storage | Wall mount | 9.0 | ||
| Brocraft 45 Degree Track Bracket for Lund | 45-degree boat tracks | Deck mount | 8.9 | ||
| HiUmi Adjustable Rotatable Plastic Fishing Rod | adjustable 4-pack storage | Deck mount | 8.7 | ||
| BroCraft Alumacraft Boat Rod Holder Mount | Alumacraft AlumaTrac | Deck mount | 8.5 | ||
| Apaspoil Fishing Rod Holder Bracket with Fishing | 6 fixed holders | Surface mount | 8.2 | ||
| rssqzqypy 2Pcs Fishing Rod Holder Bracket Tube | a removable 2-pack | 3 poles per holder | 12.44 x 1.81 x 10.66 in | 8.0 |
BigTron Fishing Rod Holder Bracket: Best for 3-rod storage
- 3-tube rod rack
- Propene polymer material
- Countersunk head bolt fixing
- Includes 8 screws
The BigTron combines 3 rod tubes with a center gap for small fishing tools. Its surface-mount design works for boats, kayaks, garages, trucks and kayak crates.
Pros
- Holds 3 rods
- Center gap stores lures or tools
- Includes screws
Cons
- Requires a surface for mounting
- Plastic construction
The BigTron is the best starting point when you want 3 rods in one surface-mounted rack. Its propene polymer construction keeps the holder light, and the slotted design works with spinning reels or fishing reels.
The countersunk head bolt fixing keeps the bolt head from protruding after installation. That detail can help reduce snag points when rods move in and out of the rack.
The center gap gives you a place for fishing lures, a filet knife or pliers. The package includes 1 fishing rod holder and 8 screws, so plan the mounting position before drilling.
BigTron lists use on boats, garages, trucks, kayak crates and walls. Each production batch is tested and certified for fresh and brackish water use.
Choose it for a simple 3-rod rack with a useful center opening. Measure the mounting surface and rod path first, especially on a narrow kayak or truck bed.
JHCJHC No Drill Curtain Rod Brackets-20LB: Best for no-drill indoor use
- Set of 4
- Adhesive or screw installation
- Plastic and stainless steel
- Fits 0.6 to 1.5 in rods
This set is designed for curtain rods and lightweight household supports, not dedicated marine rod holders. It may suit a smooth indoor surface when no-drill mounting is the main goal.
Pros
- No-drill adhesive option
- Set of 4
- Moisture-resistant design
Cons
- Not a dedicated fishing rod holder
- Adhesive works best on smooth surfaces
The JHCJHC set is best when avoiding drilled holes matters more than marine-specific design. It includes 4 wall-mount brackets made from plastic and stainless steel.
These brackets are designed for curtain rods from 0.6 to 1.5 in, so they are not a direct substitute for a dedicated fishing rod holder. They may suit a lightweight indoor support where the rod diameter and surface are within that range.
The adhesive installation works best on smooth surfaces such as glass, tile, marble and stainless steel. JHCJHC recommends cleaning and drying the surface, pressing firmly, and waiting 24 hours before use.
Screw installation is recommended for rough or uneven surfaces such as drywall, concrete, plaster or wood. The brackets are moisture-resistant for bathrooms, kitchens and laundry rooms.
Pick this set only when the no-drill use case fits the rod and surface. For a boat, a purpose-built marine bracket is the safer category match.
ISURE MARINE Fishing Rod Holder Bracket Wall: Best for 3 marine storage tubes
- 3 rod tubes
- 1.81 in inner tube diameter
- ABS plastic
- Includes screws and anti-shedding nuts
The ISURE MARINE uses 3 tubes and a reel slot to keep rods from rotating. It can mount on a boat, truck, kayak, yacht or wall.
Pros
- Marine-focused ABS construction
- 3 storage tubes
- Includes anti-shedding nuts
Cons
- Needs a mounting surface
- Check tube diameter against your rod handles
The ISURE MARINE bracket is a strong choice for 3-tube marine storage with a defined inner diameter. Each tube has a 1.81 in inner diameter, and the 0.6 in reel slot helps hold rods without rotating.
Its ABS plastic construction is lightweight and intended for freshwater and saltwater use. The assembly can mount on a boat, truck, kayak, yacht or wall, which suits a fixed storage point rather than a temporary carry setup.
The package includes screws and anti-shedding nuts. The 3-tube layout also leaves a middle gap for lures, pliers or a filet knife, so small tools stay near the rods instead of loose on a deck.
Check your rod handles and reel shape before installation. The tube diameter and reel slot matter more than the outside dimensions when you are deciding if a particular rod will sit correctly.
For daily care, rinse the tubes after saltwater use and check that the nuts stay tight. Loose hardware can let a rod shift, so a quick check before a trip helps keep the rack stable.
Choose ISURE MARINE when you want a marine-focused 3-tube rack with hardware included. Choose BigTron if the countersunk screw design and listed installation locations matter more.
Amarine Made Multi Tube Fishing Rod Rack: Best for stainless steel storage
- 316 stainless steel
- Mirror finish
- Vertical mounting
- Solid base stick for rod butts
The Amarine Made rack is a stainless steel choice for vertical storage on a wall, boat side or yacht. The base stick positions rod butts and allows water to escape.
Pros
- 316 stainless steel
- Rolled edges
- Supports wall, boat side or yacht mounting
Cons
- Heavier than plastic options
- Vertical mounting needs suitable clearance
The Amarine Made rack is best for stainless steel vertical storage. It uses 316 stainless steel with a mirror finish and supports wall, boat-side or yacht installation.
The rolled top and bottom edges avoid sharp edges around the rod openings. A solid stick across the base positions the rod butt and allows water to escape.
The rack comes as a 3-count unit and fits rods up to 1.56 in. Its vertical layout works well where a flush-mount rod holder cannot be installed, but you still need enough height for the rods.
Amarine Made says the stainless rack is designed for long service in place of plastic units. Treat that as a material and design advantage, not a promise that every installation will last the same length of time.
Pick it for a fixed marine storage point where corrosion resistance and a metal rack matter. Plastic models are easier to handle and may be simpler for temporary setups.
Brocraft 45 Degree Track Bracket for Lund: Best for 45-degree boat tracks
- 45-degree track bracket
- Aluminum construction
- Stainless steel connection hardware
- Repositionable along compatible tracks
This Brocraft bracket turns a compatible 45-degree boat track into a mounting point for compatible rod holder systems. The rod holder and accessory mount are not included.
Pros
- Moves along a compatible track
- Aluminum bracket
- Works with compatible Brocraft, Cannon and Scotty mounts
Cons
- Only for suitable 45-degree tracks
- Accessory mount not included
The Brocraft 45 Degree Track Bracket is the right fit for compatible 45-degree boat tracks. It is designed for Lund Sport Track, G3, Ranger and War Eagle applications, but you should verify the track dimensions before ordering.
The aluminum bracket slides into the compatible boat track and can be repositioned along the rail. Stainless steel connection hardware is included, which helps it suit regular marine use.
This is a mounting adapter, not a complete rod holder. It works with compatible Brocraft, Cannon and Scotty accessory mounts, while the accessory mount and rod holder are separate.
A track system is useful when your fishing position changes or you want to move gear out of the way. It is a poor match for a flat rail or a track with a different angle.
Set up is simple once the fit is right, since the bracket moves without new holes. That flexibility suits anglers who switch sides of the boat or share the rail with other accessories.
Choose it when your boat already has the right 45-degree track. For Alumacraft AlumaTrac, use the dedicated Brocraft bracket below.
HiUmi Adjustable Rotatable Plastic Fishing Rod: Best for adjustable 4-pack storage
- Adjustable and rotatable design
- Plastic construction
- 4-pack
- Fits rods up to 2 in
The HiUmi set gives you 4 plastic deck-mount holders with an adjustable, rotatable design. It suits buyers who want several mounting points rather than one fixed rack.
Pros
- 4-pack
- Adjustable and rotatable
- Fits rods up to 2 in
Cons
- Plastic construction
- The product title does not specify included hardware
The HiUmi set is best for 4 adjustable, rotatable deck-mount holders. The plastic holders fit rods up to 2 in and provide more mounting points than a single rack.
An adjustable and rotatable design lets you change the holder position for the way you fish. That can help when several rods need different angles, but you still need a deck area where each holder can be installed.
The product data identifies a 4-pack and deck mounting. It does not specify included hardware, so confirm the mounting parts before planning a new installation.
This set suits a boat where rods spread across different spots rather than stored together. Plastic keeps each holder light to handle, and the four separate units make layout easier to plan.
Before drilling, map each holder and check clearance for rods, reels and lines. A holder placed too close to a seat or control can make normal movement awkward.
Choose HiUmi when quantity and adjustability matter more than a stainless rack or track adapter. If you want a fixed multi-tube wall or boat-side rack, BigTron or ISURE MARINE gives a clearer tube-based layout.
BroCraft Alumacraft Boat Rod Holder Mount: Best for Alumacraft AlumaTrac
- Marine-grade aluminum
- CNC processed
- Pre-drilled and tapped
- Includes stainless steel hardware
This right-angle Brocraft bracket is made for Alumacraft boats with the AlumaTrac system. It can move along the track and accepts compatible BroCraft, Cannon, RamMount and Scotty mounts.
Pros
- Made for AlumaTrac
- Movable along the track
- Aluminum construction
Cons
- Dedicated track compatibility
- Side or deck mount not included
The BroCraft Alumacraft mount is made for Alumacraft boats with the AlumaTrac mounting system. Its marine-grade aluminum bracket is CNC processed, pre-drilled and tapped.
The right-angle bracket can move anywhere along the track. It fits compatible BroCraft, Cannon, RamMount and Scotty side or deck mounts, so it can work with gear you may already own.
The kit includes 1 aluminum track bracket and stainless steel connection hardware. The Brocraft side or deck mount is not included, so budget space and compatibility for that separate part.
The 0.75 in depth and 0.48 kg weight are useful when planning rail clearance. The dedicated track fit matters more than those measurements if your boat uses another system.
In daily use, the movable design helps when seating or fishfinder placement changes. You can shift the bracket along the track instead of adding a new mount on the deck.
Choose this over the 45-degree Brocraft bracket when your boat has AlumaTrac. Choose the 45-degree model for the specified Lund, G3, Ranger or War Eagle track applications.
Apaspoil Fishing Rod Holder Bracket with Fishing: Best for 6 fixed holders
- 6 rod holders
- ABS construction
- Carbon pattern design
- Includes 12 nuts and 12 screws
The Apaspoil pack gives you 6 separate holders for a boat, truck, kayak crate or wall. Its 2.6 x 2.6 x 10.6 in size makes measuring the mounting area important.
Pros
- 6 holders
- Includes nuts and screws
- ABS construction
Cons
- Needs a large mounting plan
- Check the stated size before installation
The Apaspoil pack is best for 6 fixed holders across a larger storage area. It uses ABS construction and includes 12 nuts plus 12 screws.
Each holder fits most fishing rods up to 2 in, and the stated size is 2.6 x 2.6 x 10.6 in. Measure the wall, boat side, truck or kayak crate before deciding how to arrange all 6 holders.
The carbon pattern gives the set a distinct look, while the surface-mount design keeps installation straightforward. The main trade-off is the space needed for several separate holders rather than one compact 3-tube rack.
Six separate holders let you place rods where they are easiest to reach. That can suit a garage wall or a boat side with several clear sections, but it takes more planning than a single rack.
Once mounted, each holder can be used on its own, so you are not tied to one row of tubes. Check that screws and nuts are seated well before loading rods, especially on a moving vehicle or boat.
Choose Apaspoil when you need several rods stored at once and have a clear mounting plan. For 3 rods in a tighter space, BigTron or ISURE MARINE is easier to size.
rssqzqypy 2Pcs Fishing Rod Holder Bracket Tube: Best for a removable 2-pack
- 2 triple-tube holders
- Plastic construction
- Detachable design
- Includes screws
This 2-pack provides two triple-tube holders for boats, kayaks, golf carts, garages and other outdoor setups. The detachable design suits temporary or movable storage.
Pros
- 2 holders in one pack
- Triple-tube layout
- Detachable design
Cons
- Plastic construction
- No manufacturer warranty
The rssqzqypy pack is best for portable or removable 2-holder storage. Each holder has 3 tubes, and the package includes 2 holders with screws.
The holders measure 12.44 x 1.81 x 10.66 in and use plastic construction. The detachable design suits temporary mounting or a setup that moves between a boat, garage, golf cart, cooler or trailer.
The triple-tube layout is useful when each holder needs to carry several rods. The product data does not state a manufacturer warranty, so treat the included screws and stated design as the basis for comparing it.
Having two holders gives you options for different locations. One can stay in the garage while the other moves to the boat, or both can be mounted in the same area for extra capacity.
Plastic construction keeps the holders light to carry and reposition. That helps for seasonal setups, though a fixed stainless rack may suit a permanent marine mount better.
Choose it when you want two matching racks and the option to remove them. Choose Apaspoil if you need 6 separate holders instead of two 3-tube assemblies.
How do you match a rod holder bracket to a boat?
Match the bracket to the boat's mounting system before comparing materials. A fixed surface mount needs a suitable area for screws, while a rail mount rod holder base needs the correct track shape and angle.
For a track system, identify the boat and rail first. The Brocraft 45 Degree Track Bracket is made for specified 45-degree applications, while the Alumacraft bracket is made for AlumaTrac.
For a flat wall, boat side or kayak crate, compare the holder's footprint with the available space. BigTron measures 12.4 x 1.97 x 10.63 in, while rssqzqypy measures 12.44 x 1.81 x 10.66 in.
Also check whether the package contains a complete holder or only an adapter. A bracket can be the right shape but still need a separate rod holder or accessory mount.
What makes an adjustable rod holder mount useful?
An adjustable rod holder mount helps when you need to change rod angles or reposition gear for different fishing positions. HiUmi uses an adjustable, rotatable design, while track brackets move along a compatible rail.
Adjustability adds setup choices, but it does not remove the need to check clearances. Keep rod handles, reels and lines away from paddles, steering controls and walking areas.
A rotatable holder can help when you troll, drift or fish at anchor from the same seat. Small angle changes may make a rod easier to reach without moving the whole mount.
Track brackets offer a different kind of adjustment because the position along the rail can change. That suits a boat where the best fishing spot shifts by the day or by the species.
Fixed holders still have a place when storage is the main goal. A 3-tube rack keeps rods together on a wall, truck or kayak crate, and there is no need to reset angles each time.
The right choice depends on how often you move gear. If you rarely change position, adjustability may add complexity you do not need.
For more ways to extend or reposition a holder, compare the best boat rod holder accessories. If your current holder sits too far inside the boat, an extension may solve the reach problem without replacing the holder.
Check the mount after any adjustment and before you load a rod. A loose pivot or track slider can let the holder move under load, which is hard to manage while fishing.
Also think about line paths when you rotate a holder. A new angle that feels comfortable can still send a line across a paddle, seat or other rod.
In short, adjustable mounts suit changing positions and shared deck space. Fixed racks suit simple storage, and both need a clear area around them.
Should you choose plastic or stainless steel?
Choose plastic for lighter racks and flexible storage layouts, or stainless steel when a fixed metal rack fits your boat and space. The Amarine Made rack uses 316 stainless steel, while BigTron, ISURE MARINE, HiUmi, Apaspoil and rssqzqypy use plastic or ABS materials.
Material is only one part of the decision. A stainless rack still needs the right mounting surface, and a plastic holder may be the better choice when you want a removable or lower-weight setup.
Plastic racks are often easier to mount, move and store between trips. ABS and propene polymer designs can suit a garage wall, kayak crate or truck, where weight and simple replacement matter.
Stainless steel suits a fixed marine point where the rack may stay exposed for long periods. The Amarine Made design uses rolled edges to avoid sharp points around the rod openings.
That rack also has a solid stick across the base of each tube. It helps locate the rod butt and allows water to escape after rain or washdown.
Exposure still matters with any material. Rinse salt from the rack, check screws and nuts, and look for cracks or bent parts before the next trip.
Mounting strength matters as much as the material itself. A strong rack on a weak surface can fail, while a lighter holder on a solid surface may hold well for storage.
For Railblaza systems, compare the best Railblaza rod holder base before choosing a generic bracket. The base must match the holder and the mounting system you already use.
Think about where the holder will live all season. A boat side mount faces more spray and sun than a garage wall mount, so it needs a design suited to that place.
Cost is not the only trade-off to weigh here. A lighter plastic set may be easier to fit now, while a stainless rack may suit a long-term fixed setup.
Measure the space before you decide on material or shape. A metal rack with the wrong footprint will not help if it blocks a walkway or hatch.
In the end, match the material to the mount, the surface and your plans for moving it. The best material is the one that fits the way you fish and store your rods.
How should you install and care for a mounting bracket?
Install the bracket where rods can be inserted without hitting nearby controls, seats or rails. Mark the hole positions, check the surface behind them, and keep the holder level unless its design calls for another angle.
Use the hardware supplied with the holder or adapter when it matches the mounting surface. Track brackets need the correct rail fit, while surface mounts need secure fasteners in a suitable area.
For marine use, rinse salt and debris from the holder after trips and let water drain. The Amarine Made rack includes a base stick that allows water to escape, while other holders may need a different drainage approach.
Inspect screws, nuts and mounting points before each trip. Tighten loose hardware and replace a holder if cracks or movement make the rod unstable.
What other rod holder parts may you need?
Caps, tubes, extensions and bait tables solve different storage problems, so buy them only when they match your setup. See our guide to best fishing rod holder caps if unused openings need protection.
For replacement or added storage tubes, compare the best fishing rod holder tubes. A bait table can also turn an unused holder opening into a work area, as shown in our guide to the best boat rod holder cutting board.
Scotty users should check the best Scotty rod holder mount before mixing brands. Compatibility matters more than a bracket's general shape.
Caps are a small addition, but they can keep debris and water out of empty openings. They make sense when a holder has more tubes than rods on a given day.
Tubes help when you need added storage without replacing the whole bracket. Check the diameter and mounting method before ordering, since a loose tube will not store a rod well.
Extensions may help with reach, but they also change the leverage on the mount. Make sure the base and surface can handle the added length.
A bait table can be useful at the rail where you rig hooks or cut bait. It works best when the holder opening is already in a comfortable spot.
Before buying any add-on, confirm the brand and model fit. A part that looks right may still sit poorly on a different holder design.
Keep the extra parts simple and matched to one clear task. Each item should solve a problem you actually have on the water or in storage.
Verdict: which fishing rod holder mounting bracket should you choose?
The BigTron Fishing Rod Holder Bracket is the best general pick for 3-rod surface storage. It combines 3 tubes, a center gap for small tools and included screws for a boat, garage, truck, kayak crate or wall.
For a compatible angled rail, the Brocraft 45 Degree Track Bracket is the better match. It moves along the track, but the rod holder and accessory mount are separate.
Choose Amarine Made for 316 stainless steel vertical storage. Choose HiUmi for 4 adjustable, rotatable deck-mount holders.
Choose Apaspoil for 6 separate fixed holders. Choose rssqzqypy for a removable 2-pack of triple-tube holders.
The ISURE MARINE rack is a solid middle option for marine storage. Its 1.81 in tubes and 0.6 in reel slot help keep rods from rotating, and the package includes screws and anti-shedding nuts.
The JHCJHC set should stay in the indoor, no-drill category. It is not a dedicated marine rod holder, so a purpose-built bracket is safer for boat use.
For Alumacraft boats, the Brocraft AlumaTrac bracket is the dedicated track choice. It fits compatible BroCraft, Cannon, RamMount and Scotty mounts, but the side or deck mount is not included.
Before you buy, confirm the mounting surface, rod diameter, track style and included parts. Measure the area, check clearance for reels and lines, and make sure the holder will not block movement.
Also check whether you are buying a complete holder or only an adapter. That one detail can change the total setup, even when the bracket shape looks right.
Pick the bracket that fits your boat or storage area without extra compromises. The right mount should keep rods secure, reachable and clear of the way.
Our top 3 picks at a glance
-
1
-
2
Best for no-drill indoor use
JHCJHC No Drill Curtain Rod Brackets-20LB
9.6/10 our score
See it on Amazon -
3
Best for 3 marine storage tubes
ISURE MARINE Fishing Rod Holder Bracket Wall
9.4/10 our score
See it on Amazon
Frequently asked questions
What should you check before buying fishing rod holder mounting brackets?
Check the mounting surface, rod handle size, track style and available clearance first. Surface-mount brackets need a place for screws, while track brackets need a matching rail.
Also confirm whether the rod holder itself is included, because some brackets are only adapters.
Are rail mount rod holder bases better than surface mounts?
Rail mount rod holder bases are better when you want to reposition an accessory without drilling new holes. Surface mounts are simpler for a fixed location.
A rail system only helps if the bracket matches the track angle, shape and dimensions on your boat.
Can you mount a fishing rod holder on a kayak?
Yes, if the kayak or kayak crate has a suitable mounting area and the bracket can be secured without interfering with paddling. BigTron, ISURE MARINE, Apaspoil and rssqzqypy list kayak use.
Measure first and keep rods clear of your movement.
Do fishing rod holder brackets include the rod holder?
Some do and some do not. BigTron, ISURE MARINE, Apaspoil and rssqzqypy are holder assemblies.
Brocraft's track brackets are mounting adapters, and the rod holder or accessory mount must be bought separately.
