Best picks

9 Best Mounts for Humminbird Fish Finders (November 2026)

Updated on · By the Fish Finder Critic team

The best humminbird fish finder mounts include the RAM MOUNTS Heavy-Duty Fish Finder Mount for Helix 7 owners, the Scotty 0163 Ball-Mount Fish Finder and Universal for 7 to 9 inch screens, and the WINDFRD Cast Aluminum C Size 1.5" Short (best short-arm aluminum pick).

On this page (10 sections)
  1. The best humminbird fish finder mounts for each Helix size
  2. How the best humminbird fish finder mount picks compare
  3. How we compared these mounts
  4. Which Humminbird Helix size do you have?
  5. Should you choose a ball mount, swing arm or gimbal?
  6. How long should the arm be?
  7. What materials and hardware matter in salt water?
  8. What about kayak and track mounting?
  9. How do you install and care for a Humminbird mount?
  10. Verdict: which best humminbird fish finder mount should you buy?

The best humminbird fish finder mount for most boats is the RAM MOUNTS Heavy-Duty Fish Finder Mount for Humminbird Helix 7, because it combines a Helix 7 rectangle plate, a C size ball and a medium arm in one drill-down kit. If you run a larger Helix, a swing arm or D size mount may suit you better than a compact C size arm.

A mount matters because screen angle changes how you read sonar at speed. Start with [Do Fish Finders Really Work?

What to Know](/do-fish-finders-really-work/) if you want the basics before you drill holes. The right base, arm and plate also depend on your exact console space.

Our picks at a glance

  1. 1 RAM MOUNTS Heavy-Duty Fish Finder Mount
    Best for Helix 7 owners

    RAM MOUNTS Heavy-Duty Fish Finder Mount

    9.7/10 our score

    See it on Amazon
  2. 2 Scotty 0163 Ball-Mount Fish Finder and Universal
    Best for 7 to 9 inch screens

    Scotty 0163 Ball-Mount Fish Finder and Universal

    9.7/10 our score

    See it on Amazon
  3. 3 WINDFRD Cast Aluminum C Size 1.5" Short
    Best short-arm aluminum pick

    WINDFRD Cast Aluminum C Size 1.5" Short

    9.7/10 our score

    See it on Amazon
  1. 4WINDFRD Aluminum Swing Arm Fish Finder Mount

    WINDFRD Aluminum Swing Arm Fish Finder Mount

    Best for large 5 to 12 inch screens
    Check it
  2. 5WINDFRD 1.5" Ball Medium Arm Fish Finder

    WINDFRD 1.5" Ball Medium Arm Fish Finder

    Best medium-arm universal pick
    Check it
  3. 6Humminbird Gimbal Mount for HELIX 7 Fish

    Humminbird Gimbal Mount for HELIX 7 Fish

    Best factory-style tilt mount
    Check it
  4. 7RAM MOUNTS Fish Finder Mount for Humminbird

    RAM MOUNTS Fish Finder Mount for Humminbird

    Best for Helix 8, 9, 10 and Solix 10
    Check it
  5. 8WINDFRD Aluminum 1.5" Ball Fish Finder MountCheck it
  6. 9YakAttack Fish Finder Mount for Humminbird HelixCheck it

The best humminbird fish finder mounts for each Helix size

The top pick fits Helix 7 owners who want one complete kit. The other picks cover larger screens, Helix 5 units, factory tilt setups and kayak tracks.

Choose by model fit first, then by arm reach.

1

RAM MOUNTS Heavy-Duty Fish Finder Mount: Best for Helix 7 owners

RAM MOUNTS Heavy-Duty Fish Finder Mount, humminbird fish finder mounts
9.7/10Our score
  • C size 1.5 inch ball
  • Medium length double socket arm
  • 2.5 inch round base and 1.5 x 3.5 inch rectangle base
  • Powder-coated marine-grade aluminum
  • Lifetime warranty

A complete drill-down ball mount built around the Humminbird Helix 7, with a medium arm for close helm placement.

See it on Amazon

Pros

  • Made for Helix 7
  • Near-infinite ball and socket adjustment
  • Marine-grade aluminum construction

Cons

  • Hardware not included
  • Limited to Helix 7 fit

This mount suits Helix 7 owners who want a complete flat-surface kit with no guesswork on the plate. It includes a 2.5 inch round base with a C size 1.5 inch ball, a medium length C size double socket arm and a 1.5 x 3.5 inch rectangle base that connects to the Helix 7.

The ball and socket design gives near-infinite adjustability, so you can tilt and swivel the screen toward the driver. RAM Mounts says the marine-grade aluminum is powder-coated for harsh marine use.

The mount carries a lifetime warranty and the aluminum body is built for durability in demanding marine environments.

Daily use is simple once the base is drilled down. You set the arm angle, tighten the socket and adjust the screen height.

Hardware is not included, so plan for screws and tools before install day. The rectangle base also keeps the unit close enough for quick glances while driving.

Choose this over the WINDFRD Helix 5 and 7 mount if you want the RAM C size ecosystem and a medium arm built for Helix 7. Choose the Humminbird gimbal instead if you only want tilt adjustment in a fixed panel spot.

RAM MOUNTS Heavy-Duty Fish Finder MountCheck it on Amazon
2

Scotty 0163 Ball-Mount Fish Finder and Universal: Best for 7 to 9 inch screens

Scotty 0163 Ball-Mount Fish Finder and Universal, humminbird fish finder mounts
9.7/10Our score
  • 1.5 inch ball mount
  • Universal mounting plate for 7 to 9 inch fish finders
  • 6.5 inch tall mount
  • 2.25 x 2.25 inch base mount

A tall ball mount with a universal plate sized for larger 7 to 9 inch fish finders.

See it on Amazon

Pros

  • Plate designed for 7 to 9 inch units
  • Smooth full range of motion
  • Greater clamping force from larger ball

Cons

  • Less reach than longer arms
  • Universal plate may need hole matching

Scotty suits owners with 7 to 9 inch fish finders who want a tall, stable post rather than a long arm. The 1.5 inch ball mount stands 6.5 inches tall on a 2.25 x 2.25 inch base.

The top plate is designed specifically to accept large fish finders in the 7 to 9 inch range.

The bigger ball design gives a much greater clamping force while still having a smooth full range of motion. That matters when you run in chop and need the screen to stay put without constant re-tightening.

The water resistant plastic housing also suits wet decks where spray is common.

In daily use, the height lifts the screen above dash clutter and cables. The universal plate uses pre-drilled holes, so match the hole pattern to your Humminbird bracket before you drill.

It also works with various portable electronic devices, which helps if you move gear between boats.

Choose this if your screen sits close to the base and you value height over reach. Choose a medium or swing arm instead if your console forces the mount several inches away from the driver.

Scotty 0163 Ball-Mount Fish Finder and UniversalCheck it on Amazon
3

WINDFRD Cast Aluminum C Size 1.5" Short: Best short-arm aluminum pick

WINDFRD Cast Aluminum C Size 1.5" Short, humminbird fish finder mounts
9.7/10Our score
  • C size 1.5 inch short arm
  • 3.35 inch double socket arm
  • Cast aluminum construction
  • 316L stainless steel mounting kit included
  • 15.5 lb static and 6.6 lb dynamic capacity

A compact cast aluminum mount for Helix 8 and 9, with a short arm that keeps the screen close to the base.

See it on Amazon

Pros

  • Short arm for tight consoles
  • Cast one-piece aluminum body
  • Stainless mounting kit included

Cons

  • Not for Helix 5 or 7
  • Short reach limits placement options

WINDFRD suits Helix 8 and 9 owners who want a short, solid cast aluminum mount. The package includes a C size 3.35 inch length double socket arm, a 6.23 x 2 inch universal mounting plate and a 2.4 inch diameter round base.

The mount is cast in one piece of aluminum with marine grade aluminum and stainless steel hardware and a powder coat finish. Capacity is up to 15.5 lb at rest and 6.6 lb at motion.

A complimentary 316L marine grade stainless steel mounting kit is included. The cast body is said to remain strong under wave impact.

A short arm means the screen stays near the base, which helps stability and keeps the helm tidy. Reach is the trade-off, so this pick works best when the base can sit right in front of you.

It fits C size 1.5 inch adapters and arms from RAM Mounts, Arkon and iBolt systems.

Choose this over the medium-arm WINDFRD if space is tight. Choose the swing arm instead if you run a Helix 10 or 12 and need wider rotation.

WINDFRD Cast Aluminum C Size 1.5" ShortCheck it on Amazon
4

WINDFRD Aluminum Swing Arm Fish Finder Mount: Best for large 5 to 12 inch screens

WINDFRD Aluminum Swing Arm Fish Finder Mount, humminbird fish finder mounts
9.6/10Our score
  • For 5 to 12 inch screens
  • 110 lb static and 22 lb dynamic capacity
  • 360 degree rotation on two pivot points
  • Powder-coated marine-grade aluminum
  • 6 inch arm

A swing arm mount for larger Helix 8, 9, 10 and 12 units, with two pivot points for wide rotation.

See it on Amazon

Pros

  • Handles screens over 10 inch
  • Two pivots for 360 degree rotation
  • Heavy-duty aluminum build

Cons

  • May be wider than a tight dash needs
  • Heavier than ball-only mounts

This swing arm suits owners running 5 to 12 inch screens, including Helix 8, 9, 10 and 12 models. It is made of all aluminum and can hold up to 110 lb static and 22 lb dynamic.

That capacity gives large screens far more headroom than a standard ball arm.

Two pivot points give 360 degree rotation. That helps when a passenger wants to check the screen or when you move to a different helm position.

The arm length is 6 inches. The mount is constructed of powder coated marine grade aluminum and stainless steel hardware.

The base drills down to a flat surface such as a dash or deck. The rectangle plate has pre-drilled hole combinations for many marine electronics, including GPS, CB radios, ham radios and gimbal brackets.

Complimentary 316 marine grade stainless steel machine screws, lock nuts and sheet metal screws are included.

Choose this for the largest Helix screens and for full swivel use. Choose a compact ball mount instead if dash width is limited or you want a lower profile.

WINDFRD Aluminum Swing Arm Fish Finder MountCheck it on Amazon
5

WINDFRD 1.5" Ball Medium Arm Fish Finder: Best medium-arm universal pick

WINDFRD 1.5" Ball Medium Arm Fish Finder, humminbird fish finder mounts
9.5/10Our score
  • C size 5.9 inch double socket arm
  • 6.23 x 2 inch universal mounting plate
  • 2.4 inch round base
  • 316L stainless steel mounting kit included
  • 15.5 lb static and 4.5 lb dynamic capacity

A medium-arm universal mount for Helix 8 and 9, with more reach than the short-arm version.

See it on Amazon

Pros

  • Medium reach for helm viewing
  • Universal plate with pre-drilled holes
  • Stainless mounting kit included

Cons

  • Not for Helix 5 or 7
  • Longer arm can vibrate more at speed

WINDFRD suits Helix 8 and 9 owners who need more reach than a short arm gives. The package includes a C size 5.9 inch double socket arm, a 6.23 x 2 inch universal mounting plate and a 2.4 inch round base with an AMPS hole pattern.

It is made from premium thickened marine grade aluminum with stainless steel hardware and a powder coated finish. Capacity is up to 15.5 lb static and 4.5 lb while moving.

A 316L marine grade stainless steel mounting kit is included. The mount has survived thousands of hours of salt spray testing.

The medium arm lets you clear a console edge or place the screen closer to the wheel. Ball and socket adjustment gives tilt and swivel control in rough water.

The rectangular plate features pre-drilled holes for GPS units, radios and gimbal brackets. It is compatible with 1.5 inch C size arms and adapters.

Choose this over the short-arm version when the base and seat position are far apart. Choose the gimbal instead if you want a fixed panel mount with no arm.

WINDFRD 1.5" Ball Medium Arm Fish FinderCheck it on Amazon
6

Humminbird Gimbal Mount for HELIX 7 Fish: Best factory-style tilt mount

Humminbird Gimbal Mount for HELIX 7 Fish, humminbird fish finder mounts
9.1/10Our score
  • Plastic gimbal mount for HELIX 7
  • Mounting knobs included
  • Mounting hardware included
  • Easy tilt adjustment
  • 1 year limited warranty

The factory-style gimbal for HELIX 7 units, with knobs and hardware for simple tilt adjustment.

See it on Amazon

Pros

  • Exact HELIX 7 fit except G4N
  • Knobs and hardware included
  • Simple tilt adjustment

Cons

  • Plastic construction
  • No ball-arm reach or rotation

Humminbird suits HELIX 7 owners who want the factory-style mount rather than a ball arm. This plastic gimbal mount fits all HELIX 7 models except G4N.

The kit includes the gimbal mount, mounting knobs and all necessary hardware.

The design allows easy tilt adjustments, so you can angle the screen up or down after install. It is a panel mount with an L-shape and weighs 8 ounces.

That light weight keeps dash load low. It comes with a one year limited warranty.

Trade-offs are clear. Plastic construction and a fixed position give less placement freedom than a ball and socket arm.

You also get no swivel, extension or height change. The mount simply holds the unit in the stock location and lets you tilt it for glare.

Choose this if you like the stock Humminbird look and only need tilt. Choose the RAM Helix 7 mount if you want to reposition the screen or move it between spots.

Humminbird Gimbal Mount for HELIX 7 FishCheck it on Amazon
7

RAM MOUNTS Fish Finder Mount for Humminbird: Best for Helix 8, 9, 10 and Solix 10

RAM MOUNTS Fish Finder Mount for Humminbird, humminbird fish finder mounts
8.8/10Our score
  • D size 2.25 inch ball
  • Short length double socket arm
  • 3.68 inch round base
  • 1.5 x 4.5 inch rectangle base
  • Powder-coated marine-grade aluminum
  • Lifetime warranty

A larger D-size RAM mount for Helix 8, 9, 10 and Solix 10, with a short arm and oversized ball.

See it on Amazon

Pros

  • Larger ball for bigger units
  • Lifetime warranty
  • Marine-grade aluminum build

Cons

  • Short arm limits reach
  • D-size parts are not C-size compatible

RAM Mounts suits owners with Helix 8, 9, 10 or Solix 10 who want a larger ball than C size. The kit includes a 3.68 inch round base with a D size 2.25 inch rubber ball, a short length D size double socket arm and a 1.5 x 4.5 inch rectangle base.

The larger D size ball gives more holding power for bigger units. Ball and socket technology still gives near-infinite adjustability.

The mount is powder coated marine grade aluminum and carries a lifetime warranty. The bigger base spreads load across the mounting surface.

A short arm keeps the screen near the base, so measure your dash before you order. D size parts will not mix with C size arms, so stick with the full D size system.

That sizing difference matters if you already own C size accessories for another device.

Choose this for larger Humminbird units and RAM durability. Choose the WINDFRD swing arm if you need 360 degree rotation and more reach.

RAM MOUNTS Fish Finder Mount for HumminbirdCheck it on Amazon
8

WINDFRD Aluminum 1.5" Ball Fish Finder Mount: Best for Helix 5 and 7

WINDFRD Aluminum 1.5" Ball Fish Finder Mount, humminbird fish finder mounts
8.6/10Our score
  • 1.5 inch C size ball
  • 5.5 inch double socket arm
  • 15.5 lb static and 4.5 lb dynamic capacity
  • Powder-coated aluminum
  • 316 stainless steel screws included

A drill-down ball mount sized for Humminbird Helix 5 and Helix 7 models, with a 5.5 inch arm.

See it on Amazon

Pros

  • Made for Helix 5 and 7
  • Stainless screws included
  • Good reach for helm use

Cons

  • Not for Helix 8, 9, 10, 12 or Solix
  • 90 day warranty

WINDFRD suits Helix 7 and Helix 5 owners who want a 5.5 inch arm on a drill-down base. The mount includes a C size 5.5 inch length double socket arm plus rectangle and round plates with a 1.5 inch ball adapter.

Capacity is up to 15.5 lb at rest and 4.5 lb at motion. It is constructed of powder coated marine grade aluminum and stainless steel hardware.

It includes 316 marine grade stainless steel machine screws, lock nuts and sheet metal screws. The body is cast in one piece of aluminum for strength under wave impact.

Ball and socket adjustment gives near-infinite positioning. The AMPS hole pattern installs on a boat, kayak or flat surface.

This mount is not compatible with Helix 8, 9, 10, 12 or Solix 10, 12 and 15. The universal rectangle plate uses a hole pattern for compatible device holders.

Choose this for Helix 5 or 7 with a longer reach than the RAM medium arm. Choose the RAM Helix 7 mount if you want a lifetime warranty and Helix 7-specific plate.

WINDFRD Aluminum 1.5" Ball Fish Finder MountCheck it on Amazon
9

YakAttack Fish Finder Mount for Humminbird Helix: Best for kayak track systems

YakAttack Fish Finder Mount for Humminbird Helix, humminbird fish finder mounts
8.1/10Our score
  • For Humminbird Helix 5, 7 and 9
  • LockNLoad track mounting system
  • Tool-free repositioning
  • Made in the USA
  • 1 year limited warranty

A track mount for kayak anglers running a Helix 5, 7 or 9, with tool-free LockNLoad attachment.

See it on Amazon

Pros

  • Tool-free track repositioning
  • Secure no-slip track hold
  • Built for kayak use

Cons

  • Needs a compatible track system
  • No drill-down ball-arm reach

YakAttack suits kayak anglers with a Helix 5, 7 or 9 and a factory track system. The LockNLoad attachment locks to GearTrac, MightyMount II, MightyMount XL and most other kayak track systems.

You can attach and reposition the fish finder without tools, ball mounts or slippage. That helps when you move the unit from front to back or store it quickly at launch.

The system is designed for ultra secure, no-slip track mounting in rough marine conditions.

The mount is made in the USA for freshwater and saltwater use and resists corrosion. It comes with a one year limited warranty and is waterproof.

It is a track mount, so it will not work on a boat dash or a flat deck without a track.

Choose this for kayak-only use where tool-free moves matter. Choose a drill-down ball mount for boats, or if your kayak has no compatible track.

YakAttack Fish Finder Mount for Humminbird HelixCheck it on Amazon

How the best humminbird fish finder mount picks compare

The RAM Helix 7 mount leads because it is a complete C size kit for a popular Helix size. The Scotty and short-arm WINDFRD tie on score but solve different jobs, height versus compact reach.

ProductBest forMounting TypeBall SizeMaterialOur score
RAM MOUNTS Heavy-Duty Fish Finder MountHelix 7 ownersMarine Drill-Down MountC size 1.5 inchAluminum9.7
Scotty 0163 Ball-Mount Fish Finder and Universal7 to 9 inch screens1.5 inch9.7
WINDFRD Cast Aluminum C Size 1.5" Shortshort-arm aluminum pickC size 1.5 inch9.7
WINDFRD Aluminum Swing Arm Fish Finder Mountlarge 5 to 12 inch screensAluminum9.6
WINDFRD 1.5" Ball Medium Arm Fish Findermedium-arm universal pick1.5 inch9.5
Humminbird Gimbal Mount for HELIX 7 Fishfactory-style tilt mountPanel Mount9.1
RAM MOUNTS Fish Finder Mount for HumminbirdHelix 8, 9, 10 and Solix 10D size 2.25 inchAluminum8.8
WINDFRD Aluminum 1.5" Ball Fish Finder MountHelix 5 and 71.5 inch8.6
YakAttack Fish Finder Mount for Humminbird Helixkayak track systemsTrack Mount8.1

How we compared these mounts

Our score weighs specs, features and buyer feedback against what you're shopping for. We checked model fit first because a mount only helps if it matches your Helix size.

We compared ball size, arm length, base type, materials and included hardware.

We also checked capacity and rotation. A swing arm for a 12 inch screen needs far more strength than a gimbal for a Helix 7.

We read owner reviews for patterns on hold strength, corrosion and ease of install, and we gave weight to lifetime warranties where offered.

We did not test these mounts on the water. This guide is based on specs, product details and buyer patterns.

If you want to compare screens too, see compare humminbird fish finders and our humminbird helix fish finder review.

Ball size and base footprint

Ball size tells you how much weight and vibration the joint can handle. C size 1.5 inch balls suit most Helix 7 and Helix 8 units.

D size 2.25 inch balls suit larger Helix 9, 10 and Solix screens. Base footprint matters too, because a 3.68 inch round base needs more flat dash space than a 2.25 inch base.

Which Humminbird Helix size do you have?

Match the mount to your exact Helix number before you look at arm length. Helix 5 and 7 share some options, while Helix 8, 9, 10 and 12 need larger plates and stronger mounts.

Helix 5 and Helix 7

Choose the WINDFRD 5.5 inch arm mount or the RAM Helix 7 mount. The Humminbird gimbal also fits Helix 7 except G4N.

For step-by-step help, see fish finder 700 series 727 installation.

Helix 8, 9, 10 and 12

Choose the short or medium WINDFRD arms for Helix 8 and 9, the RAM D size mount for Helix 8, 9, 10 and Solix 10, or the swing arm for Helix 8, 9, 10 and 12.

Solix and Xplore

Check the plate and ball size before you order. The RAM D size mount lists Solix 10, and the swing arm lists Solix 10 and 12 plus Xplore models.

Should you choose a ball mount, swing arm or gimbal?

Choose a ball mount for placement freedom, a swing arm for large screens and a gimbal for simple tilt. Each style suits a different dash layout.

Ball and socket mounts

Ball mounts give tilt, swivel and height adjustment in one joint. They are the most flexible choice for helm use.

C size 1.5 inch heads fit many arms, while D size 2.25 inch heads suit larger units.

Swing arm mounts

Swing arms add a second pivot for wide rotation. They suit large screens and shared helm use.

The trade-off is more width and weight on the dash.

Gimbal mounts

Gimbals give clean tilt adjustment in a fixed panel spot. They suit owners who like the factory look.

They give no reach, swivel or height change.

How long should the arm be?

Choose a short arm for a close helm, a medium arm for a blocked view and a swing arm for full rotation. Reach trades against stability.

Short arms

Short arms such as 3.35 inch keep the screen close and steady. They work when the base sits right where you sit.

They fail when a console edge blocks your view.

Medium arms

Medium arms such as 5.5 to 5.9 inch clear dash clutter and reach the driver. They add leverage, so tighten the socket well and check the screen after rough runs.

Swing arms

Swing arms with 6 inch arms and two pivots give the widest viewing range. They suit large screens and changing seating positions.

Measure dash width first so the screen can swing without hitting glass.

What materials and hardware matter in salt water?

Choose marine-grade aluminum and stainless hardware for salt water use. Powder coat and stainless screws help resist corrosion in harsh conditions.

Aluminum and stainless steel

Several picks here use powder-coated marine-grade aluminum with stainless bolts and springs. RAM Mounts backs its aluminum mounts with a lifetime warranty.

WINDFRD includes 316 or 316L stainless mounting kits on several models.

Included hardware

Some kits include screws, while the RAM Helix 7 mount does not include hardware. Check what is in the box before install day.

Pre-drilled plates help, but hole spacing still needs to match your Humminbird bracket.

Powder coat and salt spray testing

Powder coat creates a barrier between aluminum and salt water. Several WINDFRD mounts list thousands of hours of salt spray testing for bolts, springs and hardware.

That detail matters more in coastal use than in fresh water, where rinsing after each trip may be enough.

What about kayak and track mounting?

Choose a track mount only if your kayak has a compatible track system. The YakAttack LockNLoad mount fits GearTrac, MightyMount II and MightyMount XL.

Kayak track systems

Track mounts let you slide and lock the unit without drilling. That suits anglers who move the screen between front and back.

They do not suit boat dashes or flat decks.

Do you still need a ball mount?

Most kayak anglers who want ball-arm reach still need a separate arm. A track mount alone gives a fixed base position with little tilt range.

For castable units, see How Does a Castable Fish Finder Work? What to Know.

How do you install and care for a Humminbird mount?

Drill the base on flat, solid material, match the plate holes and tighten the ball socket before you run the boat. Good placement prevents most problems.

Placement and drilling

Pick a spot where the screen clears the windshield and wheel. Mark holes, drill pilot holes and set screws into solid backing where possible.

Test the angle by hand before the first trip.

Daily care

Rinse salt water off aluminum and stainless hardware after use. Check socket tightness often, especially on medium and swing arms.

For screen reading help, see best fish finders that show actual fish and furuno fish finder gps radar.

Verdict: which best humminbird fish finder mount should you buy?

Buy the RAM MOUNTS Heavy-Duty Fish Finder Mount for Humminbird Helix 7 if you own a Helix 7 and want a complete drill-down kit. Its C size ball, medium arm and lifetime warranty make it the best all-around pick here.

Pick the WINDFRD swing arm for Helix 10 or 12 screens. Pick the WINDFRD 5.5 inch mount for Helix 5.

Pick the YakAttack track mount for kayak use, and pick the Humminbird gimbal for factory-style tilt.

If you are still choosing a unit, compare best furuno fish finder gps combo options or return to our Helix guide to match screen size with mount strength.

Our top 3 picks at a glance

  1. 1 RAM MOUNTS Heavy-Duty Fish Finder Mount
    Best for Helix 7 owners

    RAM MOUNTS Heavy-Duty Fish Finder Mount

    9.7/10 our score

    See it on Amazon
  2. 2 Scotty 0163 Ball-Mount Fish Finder and Universal
    Best for 7 to 9 inch screens

    Scotty 0163 Ball-Mount Fish Finder and Universal

    9.7/10 our score

    See it on Amazon
  3. 3 WINDFRD Cast Aluminum C Size 1.5" Short
    Best short-arm aluminum pick

    WINDFRD Cast Aluminum C Size 1.5" Short

    9.7/10 our score

    See it on Amazon

Frequently asked questions

Which mount fits my Humminbird Helix?

Match the mount to your exact Helix size first. Helix 7 owners have the RAM C-size mount and the Humminbird gimbal.

Helix 5 and 7 owners can use the WINDFRD 5.5 inch arm mount.

Helix 8 and 9 owners have short, medium and swing arm options.

Do I need a ball mount or a gimbal mount?

A ball mount gives more placement and angle choices. A gimbal gives simple tilt adjustment in a fixed spot.

Choose ball and socket for helm flexibility, and gimbal for a clean factory-style install.

What arm length should I choose?

A short arm keeps the screen close and steady. A medium arm helps when the helm or console blocks your view.

Measure from the base spot to where you sit before you choose, and leave room to tilt the screen without hitting the windshield.

Can I use a kayak track mount on a boat?

No, the YakAttack mount is built for kayak track systems such as GearTrac and MightyMount. Boat owners should use a drill-down ball mount instead.

Check your track brand and width before you order a track mount.