9 Best Track Mount Rod Holders for Kayaks (November 2026)
The best kayak rod holder track mounts include the EDSRDPLT 1006 Kayak Paddle Holder Track Mount for paddle and gear storage, the Huntury Track Mount Fishing Rod Holder for quick angle changes, and the HiUmi 2 Pack Fishing Rod Holder for mixed reel types.
On this page (4 sections)
The best kayak rod holder track mount for most anglers is the Huntury Track Mount Fishing Rod Holder, because its quick-lock adapter and wide angle adjustment suit changing kayak layouts.
Choose YakAttack for a dedicated spinning and casting holder, or EDSRDPLT when you need paddle and gear storage.
A kayak gear track lets you move an accessory without drilling a new hole.
That makes track mounts useful when you change seats, carry different rods or need to clear space for a fish finder, paddle or anchor system.
The main benefit is placement control over time.
You can shift a holder forward for casting, back for trolling, or to the other side when wind and current change.
That flexibility helps on long days when comfort and access matter as much as the rod cradle itself.
Track mounts also suit kayaks that already have a factory rail.
You avoid permanent holes in the hull and keep the deck layout easy to revise.
For beginners, that means less risk if you are still learning where gear feels natural.
For experienced anglers, it means you can refine a setup without committing to one fixed position.
The trade off is compatibility.
Not every holder fits every track width or bolt pattern.
Checking the rail first saves time and avoids a loose or wobbly fit on the water.
If you are comparing holder styles, start with our guide to best fishing rod holders.
For a wider list of kayak options, see the best kayak rod holder roundup.
Those guides cover different mount types, so use them to confirm that a track system is right for your kayak.
A track mount is often the simplest path when you want adjustable positioning.
It is less simple when you need a permanent low profile fitting or a boat side track.
Matching the mount to the kayak and the way you fish is the key decision here.
Once the rail is confirmed, adjustment range and rod support become the next filters.
Our picks at a glance
-
1
Best for paddle and gear storageEDSRDPLT 1006 Kayak Paddle Holder Track Mount
9.7/10 our score
See it on Amazon -
2
Best for quick angle changesHuntury Track Mount Fishing Rod Holder
9.6/10 our score
See it on Amazon -
3
- 4
Check itBrocraft Kayak Track Mount Rod Holder
Best for adjustable rod positioning - 5
Best for keeping the paddle closeCheck it - 6
Check itYakAttack Zooka II Rod Holder with LockNLoad
Best for spinning and casting reels - 7
Best for adding new track spaceCheck it - 8
Check itHITORHIKE Side Track Fishing Rod Holder Mount
Best for side-track boats - 9
Check itSea-Lect Designs Triple Threat Rod Holder
Best for three reel styles
The best kayak rod holder track mount options
The best track mount depends on whether you need a dedicated rod cradle, a paddle holder, a replacement track or a side-mounted base.
The picks below are ordered by score, with the highest-scoring option first.
Our score weighs specs, features and buyer feedback against what you are shopping for.
We checked adjustment range, rod and reel coverage, mounting hardware, storage use and the limits of each design.
Use the order as a starting point, then check compatibility for your own kayak.
A lower ranked option can still be the better fit if it matches your track or reel style.
EDSRDPLT 1006 Kayak Paddle Holder Track Mount: Best for paddle and gear storage
- Fits 0.8–1.3 in shafts
- 2-layer grip
- Tool-free rail attachment
- Nylon construction
This 2-pack helps move a paddle, fishing net or rod hand out of the cockpit. Its rubber sleeve and double fixed elastic strap focus on grip for slimmer gear.
Pros
- Wide shaft range
- External space-saving mount
- Tool-free installation
Cons
- Paddle-holder design rather than a dedicated reel cradle
- Check rail bolt fit
The EDSRDPLT 1006 is the strongest choice when track space must serve more than one purpose.
It is a 2-pack of nylon paddle holders that fits shafts from 0.8 to 1.3 in, including fishing rods, nets and anchor poles within that range.
The rubber sleeve adds a second grip layer for slimmer gear.
A double fixed elastic strap helps hold the gear in place, while the soft rubber contact is intended to protect shafts during placement and removal.
Its external mounting position can keep a paddle outside the cockpit and leave more rail space for a dedicated rod holder.
The tool-free attachment is useful when you want to move accessories during a trip.
You can slide it along the rail, lift the gear out with one hand, and refit it without tools.
That suits anglers who paddle to a spot, then fish with both hands free.
This is not the same choice as a holder built around a reel and rod butt.
Pick it when paddle, net and compact-pole storage matter as much as rod access.
Check your rail bolt fit before ordering, since the maker notes extra bolts may be needed for some rails.
Rinse the rubber and strap after saltwater use, and inspect the elastic for wear over time.
Huntury Track Mount Fishing Rod Holder: Best for quick angle changes
- 270° vertical arm adjustment
- 360° horizontal base adjustment
- Quick-lock adapter
- 2-pack
The adjustable arm and base make it useful when you switch between casting, trolling and different seating positions. It supports spinning, baitcasting and fly rods.
Pros
- Fast lock and release
- Wide adjustment range
- Rubber strap
Cons
- Plastic construction
- Confirm track fit before ordering
The Huntury Track Mount Fishing Rod Holder is the best all-around pick for anglers who need frequent position changes.
Its 270° vertical arm adjustment and 360° horizontal base adjustment cover a wide range of seated fishing positions.
The quick-lock system lets you attach or release the holder in seconds.
The set includes the fishing rod holders and track mount adapters, and the 2-pack gives you a pair of mounting points.
It supports spinning, baitcasting and fly rods, with a stated rod fit up to 2.1 in.
A rubber strap adds another retention point when the kayak moves through rougher water.
Choose this model when you want fast changes between casting and trolling positions.
The wide adjustment helps you point the rod away from your paddle stroke or toward open water.
Its plastic construction means you should still match the holder to your track and the way you load your rod.
Set the base first, then set the arm angle, then test the strap tension with the rod in place.
Rinse the lock and strap after saltwater trips, and dry the joint so grit does not build up.
HiUmi 2 Pack Fishing Rod Holder: Best for mixed reel types
- 2 rod holders
- Universal T-shaped screw mounting
- Track-ready design
- Works with spinning, casting, conventional and fly reels
HiUmi gives you two holders for a track setup that already has compatible mounting bases. Its broad reel compatibility suits anglers who change rod styles.
Pros
- Two holders
- Supports several reel types
- Track-ready
Cons
- T-shaped mounting base is not included
- Rods are not included
The HiUmi 2 Pack is suited to anglers who use several reel types and already have compatible mounting bases.
It works with spinning, casting, larger conventional and fly reels.
The important limitation is in the mounting setup: the T-shaped mounting base and rod are not included.
Confirm that your kayak track and existing base accept the holder before choosing it.
Two holders can support a left and right layout or keep one spare for a second rod position.
The track-ready design makes it a practical choice for a simple rail arrangement.
Choose HiUmi when flexibility across reel styles matters more than a complete adapter system.
If you need everything in one package, compare it with the Huntury or YakAttack options.
Think about how you store the holders off the water, since you will need to keep bases and screws together.
A spare holder is useful if you fish with two rods or lend gear to a paddling partner.
Check the T-shaped screw fit on land first, and tighten it evenly so the holder does not twist under load.
Rinse the holders after use and check the screw threads for sand or salt before the next trip.
Brocraft Kayak Track Mount Rod Holder: Best for adjustable rod positioning
- 360° horizontal rotation
- Adjustable vertical angle
- Push-button quick release
- Fiberglass-reinforced nylon
Brocraft suits anglers who want to slide a holder along the track, set an angle and remove the holder without removing the adapter.
Pros
- Quick release
- 360° rotation
- Reinforced construction
Cons
- Check compatible track dimensions
- Single holder
The Brocraft Kayak Track Mount Rod Holder fits anglers who want a flexible position with a quick way to remove the holder.
Its 360° horizontal rotation and adjustable vertical angle let you set the rod around your seat and other gear.
A push-button release removes the holder while leaving the track adapter installed.
To reposition it, loosen the mounting knob, slide the adapter and retighten it.
The fiberglass-reinforced nylon construction adds rigidity without changing the one-holder layout.
Brocraft identifies compatibility with compatible Brocraft, YakAttack, Scotty PVC and low-profile accessory tracks.
Check your track dimensions and mounting clearance before ordering.
For a broader comparison of rail systems, read our guide to the best kayak rod holder rail mount.
The quick release suits anglers who remove gear for transport or storage but want the adapter to stay on the rail.
It also helps when you need to clear the rod for paddling in tight spots.
Set the angle with the rod loaded, not empty, so the position feels right under weight.
Rinse the button and knob after saltwater use, and make sure the locking ring moves freely before you launch.
Huntury Kayak Paddle Holder: Best for keeping the paddle close
- Fits 22–30 mm gear and paddles
- 2 holders
- Swivels in any direction
- Track installation without drilling
This pair keeps a paddle, fishing net or anchor pole near the seat while leaving other track space open for rod holders and accessories.
Pros
- Two holders
- Keeps gear outside the cockpit
- Adjustable track position
Cons
- Designed around paddle and gear storage
- Plastic construction
The Huntury Kayak Paddle Holder is best when you want to keep a paddle close without using a bungee strap across the deck.
Its upgraded strap secures gear and paddles from 22 to 30 mm in diameter.
The 2-pack can hold paddles, fishing nets or anchor poles within its stated size range.
It swivels in the direction you need, and the track stud slides to the desired position before the hand knob tightens it.
This setup can leave the main gear track open for a rod holder or other accessory.
It also keeps the paddle near the seat, where it is easier to reach while fishing or taking a break.
Pick it for paddle management first.
If the main job is holding a reel-equipped fishing rod, a dedicated rod holder gives you a more purpose-built shape.
Place it where you can reach the paddle without leaning far to one side.
That reduces the tipping feeling that can come from reaching across the deck for a loose paddle.
Practice clipping and unclipping the strap on land, so the motion is smooth with wet hands.
Rinse the strap and knob after saltwater use, and check the swivel for grit.
Replace the strap if it stretches, since a loose strap will not hold slim gear securely.
YakAttack Zooka II Rod Holder with LockNLoad: Best for spinning and casting reels
- LockNLoad track base included
- 3-mode operation
- Fits spinning and casting reels
- Marine-grade polymer
The Zooka II is a dedicated rod holder for anglers who use spinning or baitcasting reels. Its squeeze lever changes angle without tools.
Pros
- Base included
- Adjustable angle
- Made in the USA
Cons
- GearTrac is not included
- Some kayaks need a separate adapter
The YakAttack Zooka II is the best dedicated option here for anglers using spinning and baitcasting reels.
It holds both reel styles without requiring extra rod-holder tubes or inserts.
Its LockNLoad track base is included, with locked, adjustment and removal modes.
A squeeze lever lets you rotate or tilt the holder for casting and trolling positions, then lock the angle in place.
YakAttack states compatibility with YakAttack GearTrac, MightyMounts and most 1/2 in wide track systems.
GearTrac is not included, and FeelFree, Jonny Boats and 3 Waters kayaks require a separate adapter.
Choose it when a secure, dedicated rod holder matters more than a two-holder package.
It is also a strong fit for buyers who want a marine-grade polymer holder made in the USA.
The three modes help in daily use.
Locked mode keeps the rod steady during a strike, adjustment mode lets you change angle, and removal mode takes the whole base off the track.
Set the angle, release the lever fully, and check that the holder stays put before you fish.
Rinse the lever and base after saltwater trips, and dry the track slot so sand does not collect.
Ahuliao Kayak Track Mount: Best for adding new track space
- 4 track pieces
- 9 in length
- 10-hole design
- 40 screws included
Ahuliao is a track-installation option for kayaks that need more mounting space. It can support rod holders, paddle holders, fish finders, cup holders and anchor clips.
Pros
- Four track pieces
- Flexible hole layout
- Lightweight ABS-style material
Cons
- Requires installation on the kayak
- Not a complete rod holder
The Ahuliao Kayak Track Mount is for adding mounting space rather than holding a rod by itself.
The package includes 4 black plastic track pieces, each 9 in long with a 10-hole design, plus 40 screws.
Use the added track for compatible rod holders, paddle holders, fish finders, cup holders or anchor clips.
The extra rail length can help when the kayak has limited factory mounting positions.
This choice requires more planning because it is a bolt-on track installation.
Measure the available surface and check that the mounting area suits the track layout before drilling.
Choose Ahuliao when the real problem is a lack of gear-track space.
If your kayak already has a usable rail, spend the budget on a holder and adapter instead.
Plan the layout on paper first, with seat position, paddle reach and rod angle marked.
That helps you place holes where they will not interfere with hatches or footwell space.
Use the 10-hole pattern to spread load, and tighten screws evenly along the length.
Test each accessory on the new track before you drill the next section.
Rinse the track and screws after saltwater use, and check for loosening after the first few trips.
HITORHIKE Side Track Fishing Rod Holder Mount: Best for side-track boats
- Heavy-duty side-mounted base
- 2 interchangeable mounting bolt options
- Works with compatible Lund, Lowe, bass boat and trolling kayak side tracks
- Nylon
This mount fits a narrower use case: compatible side tracks on named boat and kayak styles. It helps create a side-mounted rod-holder setup without using deck space.
Pros
- Two bolt options
- Side-track design
- Heavy-duty base
Cons
- Compatibility is track-specific
- Single mount
The HITORHIKE Side Track Fishing Rod Holder Mount is designed for compatible side tracks on Lund sport boats, Lowe boats, bass boats and trolling kayaks.
Its side-mounted layout can preserve deck space for seating and other equipment.
It includes 2 interchangeable mounting bolt options, which gives you more flexibility across compatible side-track configurations.
The nylon base is intended for rod-holder mounting in trolling, casting and everyday fishing setups.
This is a narrower compatibility choice than a general kayak gear-track adapter.
Confirm your boat or kayak track style before choosing it, especially if your rail is not one of the named side-track types.
Pick HITORHIKE when side mounting is the main requirement.
It is not the first choice for a standard top-mounted kayak gear track.
Side mounting can keep the rod low and clear of the center deck.
That suits trolling setups where you want gear out of the walking or seating area.
Measure the side track length and bolt spacing before you order, since the two bolt options still need a matching profile.
Mount the base, load the rod, and check clearance for reels and handles in the fishing position.
Rinse the nylon base and bolts after saltwater use, and store the spare bolt option with the mount.
Sea-Lect Designs Triple Threat Rod Holder: Best for three reel styles
- Supports spin, baitcasting and fly rods
- Quarter-turn angle adjustment
- Rear bail for vertical storage
- Leash attachment points
Sea-Lect Designs combines support for three reel styles with a rear bail for moving the kayak and leash attachment points for rough conditions.
Pros
- Three reel styles
- Vertical storage position
- Leash attachment points
Cons
- Single holder
- Angle adjustment uses a quarter-turn knob
The Sea-Lect Designs Triple Threat is a useful choice when one holder must support spin, baitcasting and flyfishing rods.
Its quarter-turn knob changes the rod angle without a long adjustment process.
A rear bail holds the rod vertically during movement between locations.
Leash attachment points on the base give you a place to clip the rod and reel when conditions are rough.
The holder attaches to the existing track of most major manufacturers.
Its polypropylene construction and single-holder format keep the design straightforward.
Choose it for reel-style flexibility and vertical storage.
For a holder with a larger stated adjustment range, compare it with Huntury or Brocraft.
The vertical position is helpful when you paddle between spots and want the rod upright and clear.
It can also help when you need to move gear on land without laying the rod across the deck.
The quarter-turn knob suits quick changes, but set the angle with the rod in place so you know where it will sit.
Use the leash points when waves or wind make the kayak move a lot.
Clip the rod, then check that the leash does not tangle with your paddle stroke.
Rinse the holder and knob after saltwater use, and check the bail pivot for sand.
How to choose a kayak rod holder for track mount
Choose the holder by track compatibility first, then compare adjustment, rod style and retention. A holder that cannot lock into your rail is not useful, even if its rod cradle looks right.
Does the track mount fit your kayak?
Track systems vary in width, bolt pattern and adapter shape. YakAttack states that its LockNLoad base works with most 1/2 in wide tracks, while Brocraft calls out compatible Brocraft, YakAttack, Scotty PVC and low-profile tracks.
Check the track width and mounting clearance before ordering. If your kayak lacks enough rail space, the Ahuliao 9 in tracks can add four new mounting sections, but installation requires planning and screws.
Do you need a rod holder or a paddle holder?
A rod holder is shaped around the rod and reel. A paddle holder is better for moving a paddle, net or anchor pole out of the cockpit.
The EDSRDPLT fits 0.8–1.3 in shafts and the Huntury paddle holder fits 22–30 mm gear and paddles. For reel-equipped rods, choose a dedicated option such as Huntury, YakAttack, Brocraft or Sea-Lect Designs.
How much adjustment is useful?
A 360° base can help when you change the rod position around your seat. Vertical adjustment matters when you switch between casting, trolling and storage.
Huntury offers 270° vertical arm movement and 360° horizontal base movement. Brocraft offers 360° horizontal rotation with adjustable vertical angles, while YakAttack uses a squeeze lever for angle changes.
How should you set up the holder?
Place the holder where the rod is reachable without forcing you to lean across the kayak.
Slide the adapter along the track, tighten the knob or lock, then check that the rod angle clears your paddle stroke and other accessories.
Sit in your normal fishing position before you lock anything down.
Your reach from the seat decides whether the holder is actually useful on the water.
Try a casting motion and a trolling angle with the rod loaded in the holder.
Move the base forward or back until both feel natural and clear of your legs.
Use the holder's strap, locking ring or leash point when those features are available.
Keep the paddle and other long gear secured so they do not block your hands or catch on nearby equipment.
Store spare rods in a vertical or low position when you are moving between spots.
That keeps tips clear of trees, docks and other boats.
Check the setup again after the first launch, since water movement can reveal a loose knob or strap.
Rinse the track, knob and strap after saltwater use, and dry them before storage.
A short check on land takes less time than fixing a loose holder in wind or current.
What should you check before saltwater use?
Rinse track hardware and holder surfaces with fresh water after saltwater trips. Dry the parts before storage, and check knobs, straps, locking points and bolts for grit or looseness.
Corrosion resistance varies by material and hardware. Huntury describes its holder as corrosion-resistant, while the product data for other models identifies materials such as nylon, polypropylene, plastic and marine-grade polymer without giving a common saltwater maintenance schedule.
Track mounts compared with other kayak rod-holder mounts
Track mounts are best when you want adjustable positioning and a no-drill accessory system.
They are less useful when your kayak has no compatible rail or when you want a permanent low-profile installation.
A track lets you move a holder as your fishing style changes.
You can also remove accessories for transport, storage or repair without leaving holes in the hull.
That flexibility is the main reason track systems suit kayak fishing so well.
Our guide to best kayak rod holder mounts covers other mounting approaches.
If you want a holder attached directly through the kayak wall, compare the best flush mount rod holder for kayak.
A flush mount can give a fixed, low profile position.
It does not slide along a rail, so placement has to be right at installation.
For surf setups, see the best surf fishing rod holder.
A home storage setup is a different job, so use the best wall mounted fishing rod holder guide for that use.
Boat owners who want brand-specific options can also compare the best Scotty rod holders for boats.
Those boat options may use side tracks or gimbal mounts that do not fit a kayak rail.
Track mounts suit kayaks best when the rail width and adapter shape already match.
If the kayak has no rail, adding a track first can create the mounting space you need.
That added track will require screws and planning, so measure the hull surface carefully.
Once the rail is in place, you can swap holders, paddle clips and cup holders as needed.
Care is simple but consistent.
Rinse the track and hardware after saltwater trips, dry the parts, and check knobs and straps for grit.
That routine keeps sliding and locking actions smooth over time.
Choose a track mount for adjustability, and choose another mount type when a fixed or boat-specific fitting suits the job better.
Final choice for the best kayak rod holder track mount
The best kayak rod holder track mount for most changing kayak layouts is the Huntury Track Mount Fishing Rod Holder.
Pick EDSRDPLT or the Huntury Kayak Paddle Holder when freeing space for paddles and nets is the priority.
Choose YakAttack for spinning and baitcasting reels with a LockNLoad base, Brocraft for quick removal and broad angle adjustment, or Sea-Lect Designs for spin, baitcasting and flyfishing support in one holder.
If your kayak needs new rail space, start with Ahuliao before choosing the holder that will attach to it.
Match the choice to the main job first.
A dedicated rod holder suits reel-equipped rods, while a paddle holder suits paddles, nets and anchor poles.
Check track width, bolt pattern and mounting clearance before you order any option.
That check prevents a loose fit and saves time on the water.
Set the holder from your seat, with the rod loaded, and test casting and trolling angles.
Move the base along the track until reach and paddle stroke both feel clear.
Use straps, locking rings and leash points where they are fitted.
Rinse hardware after saltwater use, dry the parts, and inspect knobs and elastic for wear.
With the rail confirmed and the layout tested, the right track mount should make fishing more comfortable and keep gear secure.
| Product | Best for | Shaft range | Material | Mount | Our score |
|---|---|---|---|---|---|
| EDSRDPLT 1006 Kayak Paddle Holder Track Mount | paddle and gear storage | 0.8–1.3 in | Nylon | Rail mount | 9.7 |
| Huntury Track Mount Fishing Rod Holder | quick angle changes | Plastic | Rail mount | 9.6 | |
| HiUmi 2 Pack Fishing Rod Holder | mixed reel types | Rail mount | 9.5 | ||
| Brocraft Kayak Track Mount Rod Holder | adjustable rod positioning | Nylon with fiberglass reinforcement | Rail mount | 9.4 | |
| Huntury Kayak Paddle Holder | keeping the paddle close | Plastic | 9.0 | ||
| YakAttack Zooka II Rod Holder with LockNLoad | spinning and casting reels | 8.8 | |||
| Ahuliao Kayak Track Mount | adding new track space | Plastic | 8.5 | ||
| HITORHIKE Side Track Fishing Rod Holder Mount | side-track boats | Nylon | Side mount | 8.3 | |
| Sea-Lect Designs Triple Threat Rod Holder | three reel styles | Polypropylene | Rail mount | 8.1 |
Our top 3 picks at a glance
-
1
Best for paddle and gear storageEDSRDPLT 1006 Kayak Paddle Holder Track Mount
9.7/10 our score
See it on Amazon -
2
Best for quick angle changesHuntury Track Mount Fishing Rod Holder
9.6/10 our score
See it on Amazon -
3
Frequently asked questions
What is the best kayak rod holder track mount?
The Huntury Track Mount Fishing Rod Holder is the strongest general choice because it has a quick-lock adapter, 270° vertical arm adjustment, 360° horizontal base adjustment and support for spinning, baitcasting and fly rods. Choose YakAttack for spinning and casting reels with a LockNLoad base, or EDSRDPLT for paddle and gear storage.
Do kayak track rod holders require drilling?
Most holders in this roundup attach to an existing kayak gear track without drilling. EDSRDPLT and Huntury describe tool-free or quick track attachment, while Ahuliao is different because it adds new 9 in tracks and uses screws.
Check your kayak before choosing a mounting system.
Are track mount rod holders adjustable?
Yes, many are adjustable along the track or at the holder joint. Huntury has a 270° vertical arm and 360° horizontal base, while Brocraft has 360° horizontal rotation and an adjustable vertical angle.
YakAttack uses a squeeze lever for quick angle changes.
Can a kayak track holder fit spinning and casting rods?
Yes, several options support both styles. YakAttack specifically supports spinning and baitcasting reels, while Huntury supports spinning, baitcasting and fly rods.
HiUmi also works with spinning, casting, larger conventional and fly reels, but its mounting base is not included.
About this guide: Our look at kayak rod holder track mounts draws on maker specs, materials and what owners report. See how we research.



