7 Best Minn Kota Talon Mounting Brackets (November 2026)
The best Minn Kota Talon mounting brackets include the Sunluway For Minn Kota 1854021 Quick Release for low-profile quick release, the sixcow For Minn Kota 1854017 RTA-17 Quick for broad motor compatibility, and the Minn Kota 1810340 Talon Jack Plate Adapter for jack plate mounting.
On this page (5 sections)
The best Minn Kota Talon mounting bracket for most quick-release needs is the Sunluway 1854021 MKA-21. It gives compatible Minn Kota trolling motors a low-profile composite mounting plate, while the Minn Kota 1810340 is the better match for a Talon mounted beside a jack plate.
That split matters from the start. A quick release bracket and a Talon adapter do not solve the same job, even though both help a Minn Kota rig mount cleanly on the boat.
The Sunluway option suits owners who remove a bow motor often and want the deck left clearer when the motor is off. Its composite construction also suits buyers who would rather avoid exposed metal rust concerns around the mount.
The 1810340 suits a different layout entirely. It moves the Talon to the side of a jack plate, which can help when the transom itself is crowded by other gear.
A Talon bracket needs to match more than the anchor. Your transom shape, jack plate position, motor model, drilling area and overhead clearance all affect the right choice.
Those checks should come before drilling. A few missed inches can turn a neat mounting plan into a bracket that fights the motor, the plate or the stowed anchor.
Material is only one part of the decision. Fit, workflow and clearance decide whether the bracket works in daily use or just looks right on paper.
Care also starts with the right match. The correct part number and mount position make routine checks simpler and reduce stress on the hardware over time.
If you are still planning the anchor layout, start with this boat anchor guide. For shallow-water anchor choices beyond the bracket, compare our guide to the best shallow water anchor.
Use those guides to sort the anchor job first, then let the bracket follow the layout you actually have.
Our picks at a glance
-
1
Best for low-profile quick releaseSunluway For Minn Kota 1854021 Quick Release
9.7/10 our score
See it on Amazon -
2
Best for broad motor compatibilitysixcow For Minn Kota 1854017 RTA-17 Quick
9.4/10 our score
See it on Amazon -
3
Best for jack plate mountingMinn Kota 1810340 Talon Jack Plate Adapter
9.4/10 our score
See it on Amazon
- 4
Best for temporary overhead clearanceCheck it - 5
Check itsixcow 1854060 MKA-32 for Minn Kota Ulterra
Best for aluminum quick release - 6
Check itBzcovac MKA-32 Quick Release Bracket for Minn
Best for a complete MKA-32 kit - 7
Check itMarinetech Panther 55-0410 Auxiliary Outboard 4-Stroke Motor
Best for adjustable auxiliary outboards
The best Minn Kota Talon mounting brackets for different layouts
The best bracket depends on the mounting problem: quick removal, jack plate placement, temporary tilt clearance or adjustable auxiliary-motor support. We compared the stated fit, materials, mounting style and included parts against those jobs.
Our score weighs specs, features and buyer feedback against what you're shopping for.
| Product | Best for | Part | Material | Motor fit | Our score |
|---|---|---|---|---|---|
| Sunluway For Minn Kota 1854021 Quick Release | low-profile quick release | 1854021 MKA-21 | Composite | Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40 | 9.7 |
| sixcow For Minn Kota 1854017 RTA-17 Quick | broad motor compatibility | 1854017 RTA-17 | High-yield composite | Terrova, Ulterra, PowerDrive, PowerDrive V2, Pontoon, Deckhand 40, Riptide ST and Riptide SP | 9.4 |
| Minn Kota 1810340 Talon Jack Plate Adapter | jack plate mounting | 1810340 | Aluminum | 9.4 | |
| Minn Kota Talon Tilt Bracket | temporary overhead clearance | 1810222 | Anodized aluminum | 9.2 | |
| sixcow 1854060 MKA-32 for Minn Kota Ulterra | aluminum quick release | 1854060 MKA-32 | Anodized aluminum | Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and DeckHand 40 | 8.8 |
| Bzcovac MKA-32 Quick Release Bracket for Minn | a complete MKA-32 kit | MKA-32, replaces 1854060 | Marine-grade aluminum and stainless steel | 8.5 | |
| Marinetech Panther 55-0410 Auxiliary Outboard 4-Stroke Motor | adjustable auxiliary outboards | 55-0410 | Aluminum | 8.3 |
Sunluway 1854021 MKA-21
Sunluway For Minn Kota 1854021 Quick Release: Best for low-profile quick release
- Fits several Minn Kota electric trolling motors
- Low-profile composite design
- Stainless steel locking pins
- Bolt-on installation
A low-profile quick-release bracket for compatible Minn Kota trolling motors. It suits boat owners who need to remove and reinstall the motor while keeping the deck clear.
Pros
- Low-profile base
- Rust and corrosion-resistant composite
- Stainless steel locking pins
Cons
- Not for shafts 72 in or longer
- Not for 112 lb thrust motors
The Sunluway 1854021 MKA-21 is the best overall choice when you need a low-profile quick-release bracket for a compatible Minn Kota electric trolling motor. It fits Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40 motors.
Its composite construction is designed to resist rust, corrosion, discoloration, UV exposure and salt-water oxidation. That makes the material a sensible fit for boat owners who want a mounting plate without exposed metal rust concerns.
The bracket uses an outer plate on the motor and an inner plate on the boat deck. Drilling is required, so check the underside of the mounting area before you mark the holes.
A locking U handle and stainless steel pins hold the plates together. The low-profile design leaves the deck clearer after you remove the motor, and the outer locking pin has a hole for a padlock, although the padlock is not included.
This bracket is not for motors with shafts 72 in or longer or motors rated at 112 lb thrust. Confirm those two limits before choosing it for a large trolling motor.
sixcow 1854017 RTA-17
sixcow For Minn Kota 1854017 RTA-17 Quick: Best for broad motor compatibility
- Fits standard and scissor bow mounts
- 4 x 6 in low-profile base
- Composite construction
- Stainless steel hardware included
This quick-release bracket covers a wide group of Minn Kota trolling motors and uses a compact 4 x 6 in base. It is a practical choice when the exact RTA-17 part match is confirmed.
Pros
- Works with standard and scissor bow mounts
- Low-profile footprint
- Corrosion-resistant hardware
Cons
- Not for 112 lb thrust motors
- Not for shafts 72 in or longer
The sixcow 1854017 RTA-17 is a strong pick when you need wider compatibility across Minn Kota trolling motor families. It works with Terrova, Ulterra, PowerDrive, PowerDrive V2, PowerDrive Pontoon, Deckhand 40, Riptide ST and Riptide SP motors.
It works with standard and scissor bow mounts. The boat-side base measures 4 x 6 in, giving you a compact footprint that is less likely to interfere with walking space or a boat cover.
The bracket uses high-yield composite material with corrosion-resistant hardware. Its outer and inner plates meet with a U handle and locking pin, and the package includes nuts, washers, bolts and spacers.
No tools are needed for the quick-release step after the plates are mounted. You still need to drill during the initial installation, so measure the motor position, deck edge and nearby obstructions first.
Like the Sunluway option, this bracket is not compatible with 112 lb thrust motors or shafts 72 in and longer. The part number match is the key buying check.
Minn Kota 1810340 Talon Jack Plate Adapter
Minn Kota 1810340 Talon Jack Plate Adapter: Best for jack plate mounting
- Mounts Talon to either side of a jack plate
- Port or starboard installation
- Aluminum construction
- Standard mounting hardware included
The 1810340 moves a Talon mounting point to the side of your jack plate. It fits buyers who need to work around a transom layout and want port or starboard placement.
Pros
- Designed for jack plates
- Port or starboard use
- Aluminum construction
Cons
- Does not replace every transom or adapter setup
- Measure the jack plate area before drilling
The Minn Kota 1810340 is the best choice when a jack plate offers the cleanest place to mount your Talon. It places the shallow-water anchor directly on the side of the jack plate and supports either port or starboard installation.
This is different from a quick-release trolling motor bracket. The 1810340 is a Talon jack plate adapter, so it solves a side-mounting problem rather than a removable bow-motor problem.
The bracket is made from aluminum and includes standard mounting hardware. Its stated dimensions are 30.5 x 13.75 x 5 in, and the item weight is 20 lb, so account for the bracket itself when planning the installation area.
A jack plate can help free space around the transom, but only if the anchor has room to deploy and stow without hitting the motor, trim hardware or boat structure. Dry-fit the layout before drilling.
Choose this bracket when the jack plate is central to your boat's layout. Choose a transom adapter instead when the side of the jack plate cannot provide the needed clearance.
Minn Kota Talon Tilt Bracket
Minn Kota Talon Tilt Bracket: Best for temporary overhead clearance
- Tilts a Talon forward
- Adjustable deck support
- Anodized aluminum
- Stainless steel hardware and crutch support included
This bracket helps tilt a Talon for low garages, bridges or other overhead obstacles. It requires a Talon adapter bracket and is not intended for transport or direct transom mounting.
Pros
- Creates temporary clearance
- Adjustable deck support
- Marine-grade anodized aluminum
Cons
- Requires a Talon adapter bracket
- Not for trailering or water transport while tilted
The Minn Kota Talon Tilt Bracket is the best pick for temporary overhead clearance. It lets the Talon tilt forward in low garages, beneath bridges or in another area where the fully raised anchor needs more room.
The bracket uses marine-grade anodized aluminum and includes an adjustable deck support rod, stainless steel mounting hardware and a Talon crutch support. The support helps stabilize the anchor while it is tilted.
This bracket requires a Talon adapter bracket. It is not intended for direct transom mounting, so it should be treated as part of a mounting system rather than a stand-alone transom solution.
The most important limitation is use during transport. This bracket is for temporary clearance only, not for trailering or traveling on the water while the Talon is tilted.
Before installation, check the tilt path and the deck support position. The anchor needs room to move without contacting the boat, motor or nearby hardware.
sixcow 1854060 MKA-32
sixcow 1854060 MKA-32 for Minn Kota Ulterra: Best for aluminum quick release
- Marine-grade anodized aluminum
- Cam-lock design
- Composite cover included
- Stainless steel mounting hardware
This MKA-32 replacement uses anodized aluminum and includes a cover for the lower bracket area when the motor is removed. It suits buyers who want a metal quick-release setup with a cleaner deck profile.
Pros
- Aluminum construction
- Cam-lock and locking lever
- Composite cover included
Cons
- Heavier than the composite quick-release options
- Confirm the 1854060 or MKA-32 match
The sixcow 1854060 MKA-32 is the best aluminum option for a compatible Minn Kota electric trolling motor quick-release setup. It fits Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and DeckHand 40 motors.
Its marine-grade solid anodized aluminum construction is intended to resist rust, corrosion and discoloration. Compared with the composite quick-release choices here, it is the heavier option at 3.43 kg.
That weight is the main trade off. Buyers who prefer metal often accept the extra mass, but it should be part of the deck and motor handling plan from the start.
The cam-lock design uses tight tolerances to reduce bracket movement and noise. Less movement can make the motor feel steadier during a quick release stop and restart.
A locking lever, lanyard, locking pin and stainless steel mounting hardware support the quick-release setup. The included hardware also helps keep the mounting system matched to the bracket design.
A composite cover attaches to the lower half of the bracket when the motor is removed. That keeps the remaining deck area cleaner and reduces the open-bracket look.
The cover is a daily use detail, not just trim. It helps when the motor is off and people are moving around the bow.
The part match matters most. Confirm that your motor uses 1854060 or MKA-32 before you drill, especially if an older bracket is being replaced.
Bzcovac MKA-32 Quick Release Bracket
Bzcovac MKA-32 Quick Release Bracket for Minn: Best for a complete MKA-32 kit
- Upper and lower plates
- Composite cover
- Lanyard and locking pin
- Stainless steel mounting hardware
The Bzcovac MKA-32 includes the main bracket pieces, cover, lanyard, locking pin and stainless steel hardware. It fits a compatible bow-mounted trolling motor when the 1854060 replacement match is correct.
Pros
- Complete hardware package
- Composite cover
- Cam-lock design
Cons
- Compatibility still depends on the motor model
- Installation requires a flat, clear drilling area
The Bzcovac MKA-32 suits buyers who want a complete replacement package for a compatible 1854060 mounting setup. It includes upper and lower bracket plates, a composite cover, lanyard, locking pin and stainless steel mounting hardware.
The bracket is designed for Minn Kota Ulterra, Terrova, PowerDrive, PowerDrive V2, PowerDrive Pontoon and Deckhand 40 trolling motors. It uses a cam-lock design to hold the motor in place and help limit movement.
Its materials are marine-grade aluminum and stainless steel, and the bracket is intended for bow mounting. The listed dimensions are 14.84 x 9.29 x 1.37 in, with an item weight of 6.9 lb.
Installation requires a flat, clear area under the mounting location for drilling, nuts and washers. The motor should sit close to the boat centerline, while the motor rest needs enough distance beyond the boat edge.
This is a useful MKA-32 alternative, but do not choose by appearance alone. Match the 1854060 or MKA-32 part number and check that the stowed motor clears nearby hardware.
Marinetech Panther 55-0410
Marinetech Panther 55-0410 Auxiliary Outboard 4-Stroke Motor: Best for adjustable auxiliary outboards
- 5 vertical running positions
- 10 in travel
- Up to 35 hp and 263 lb
- Anodized aluminum bracket
The Panther 55-0410 is a manual transom bracket for auxiliary 4-stroke outboards, not a direct Talon mounting bracket. Its adjustable height and 10 in travel make it useful for a different transom-mounting job.
Pros
- 5 vertical positions
- Supports up to 35 hp and 263 lb
- 10 in travel
Cons
- Not a Talon-specific bracket
- Requires the Panther 55-0415 safety cable
The Marinetech Panther 55-0410 is the best choice here for an adjustable auxiliary outboard bracket, not for direct Minn Kota Talon mounting. It is a transom-mount bracket for 4-stroke gasoline outboards.
The bracket provides 5 vertical running positions and 10 in of travel. It supports motors up to 35 hp and 263 lb, making it a much larger and different type of mounting system than the Talon adapter brackets above.
Anodized aluminum, stainless steel torsion springs and aircraft-type stainless steel hardware support the manual height adjustment. A 2 in thick, extra-wide mounting board gives the transom more mounting surface.
The 55-0410 measures 24.25 x 12.5 x 10 in and weighs 19 lb. Those dimensions matter if the transom has limited space or if an auxiliary motor must clear a swim platform.
The Panther 55-0415 safety cable is required for use, and the product data states that it is included. Choose this bracket only when your project involves an auxiliary outboard and adjustable transom height.
How to match a Talon bracket to your transom
A transom-mounted Talon needs enough room to deploy, stow and clear the outboard. Start by identifying where the anchor will sit when raised, then check the path below the mounting point before drilling.
That raised position sets the real limits. A bracket can look right on the transom and still leave no room for the anchor, the motor or nearby gear once everything is up.
A jack plate may provide a better side-mount location than the flat transom. The Minn Kota 1810340 is designed for port or starboard jack plate mounting, so it is the clearest match when the jack plate controls your available space.
Side mounting changes the whole layout. It can free transom space, but it also creates a new clearance path that needs the same careful check.
If the Talon must move temporarily for a garage or bridge, use the tilt system only for that clearance task. The Minn Kota Tilt Bracket is not a transport solution.
Treat tilt as a short stop, not a travel setup. The anchor should return to its normal position before you move on the water or trailer the boat.
A quick release bracket solves yet another problem. It helps with removing a trolling motor, not with finding a new place for a Talon on the hull.
That distinction saves time. Match the bracket to the exact job, whether that job is side mounting, temporary tilt clearance or removable bow motor use.
Check the deployment path on dry land first. Watch for contact with the hull, outboard, jack plate, trim hardware and boat edge through the full range of motion.
Also check the underside of the mounting area. Nuts and washers need clear access, and a flat surface makes the installation far easier to complete.
For broader anchor setup ideas, see our guide to the best boat anchor holder. It covers mounting and storage choices that can affect how much room remains around the transom.
Plan the bracket last, after the anchor path is clear. That order keeps the hardware serving the boat, rather than the other way around.
What to check before installing a Minn Kota Talon bracket
Confirm the exact Talon adapter or bracket part number before drilling. A quick-release trolling motor bracket, jack plate adapter and tilt bracket are not interchangeable jobs.
That part number check is the gate for everything else. The wrong bracket can fit the brand and still miss the motor, the mount or the clearance path you need.
Measure the mounting surface and inspect the underside for clear access to nuts and washers. The Bzcovac MKA-32 installation notes also call for a flat, clear area under the mounting location.
A flat area matters in daily use as well as during setup. It helps the bracket sit evenly and makes future checks of the hardware simpler.
Next, check the deployment path. The motor or anchor should not hit the hull, outboard, jack plate, trim hardware or boat edge as it moves.
Walk the full path slowly by hand. Small interference points are easier to fix before drilling than after the mount is fixed in place.
Keep the bracket hardware matched to the bracket design. Stainless steel hardware is included with several picks here, but the exact included parts differ between the products.
Do not mix parts between brackets to save a run to the store. Each system is built around its own plates, pins and fasteners.
For electrical planning after the bracket is chosen, follow our Minn Kota Talon wiring guide. For other add-ons, see the best Minn Kota Talon accessories and our guide to Minn Kota Talon cable replacement.
Leave the bracket alone until the part and path are confirmed. A short check now can prevent a much larger rework later.
Composite or aluminum: which bracket material fits?
Composite brackets suit buyers who want a lighter, corrosion-resistant quick-release plate. The Sunluway and sixcow RTA-17 options use composite construction, while the MKA-32 choices use aluminum or aluminum with stainless steel parts.
That material split is best seen as a workflow choice. Composite suits quick removal with less concern about rust, while aluminum suits buyers who prefer a metal bracket feel.
Aluminum can suit buyers who prefer a metal bracket, but it can add weight. The sixcow 1854060 MKA-32 weighs 3.43 kg, while the Bzcovac MKA-32 weighs 6.9 lb.
Weight shows up in daily handling. A heavier bracket is still manageable for many owners, but it should not be ignored when the motor is lifted on and off.
Composite also has limits to weigh. Its lighter, corrosion-resistant build is attractive, yet the right fit still depends on the motor and mount type.
Care differs with each material too. Composite needs checks for wear around the locking parts, while aluminum needs checks for movement, corrosion and fastener condition.
Neither material removes the need for a clean test fit. The bracket must sit flat, lock firmly and clear the deployment path before the holes are final.
Material alone does not decide fit. The motor family, OEM-equivalent part number, mounting position and clearance path matter first.
Choose the material after those checks, not before them. That order leads to a bracket that matches the boat and the job at hand.
Verdict: which Minn Kota Talon bracket should you buy?
The Sunluway 1854021 MKA-21 is the best Minn Kota Talon mounting bracket choice here for a low-profile quick-release setup on compatible Minn Kota trolling motors. Pick the sixcow RTA-17 when its wider motor compatibility matches your setup.
Start with the job your bracket has to do. Quick removal, jack plate side mounting and temporary tilt clearance are different problems, and each one points to a different part.
Choose the Minn Kota 1810340 for a jack plate side mount. Choose the Minn Kota Talon Tilt Bracket when temporary overhead clearance is the real problem.
For quick release use, the Sunluway suits a low profile composite plate on its listed motors. The sixcow RTA-17 suits a wider listed motor group and standard or scissor bow mounts.
For an aluminum MKA-32 setup, compare the sixcow and Bzcovac options by part number, included cover and bracket weight. That comparison should include how often you will lift the motor and how clean you want the deck to look when it is off.
Choose the Panther only for an adjustable auxiliary outboard transom bracket, not as a Talon replacement. Its height adjustment serves a different transom job from the Talon adapters above.
Before you buy, confirm the exact part number and the clearance path. Those two checks matter more than material preference or a general brand match.
Also confirm the limits listed for your motor. Shaft length, thrust rating and mount type can rule out an otherwise close option.
Pick the bracket that matches the layout you have today. A clean fit on the first install is the simplest care plan for the seasons ahead.
Our top 3 picks at a glance
-
1
Best for low-profile quick release
Sunluway For Minn Kota 1854021 Quick Release
9.7/10 our score
See it on Amazon -
2
Best for broad motor compatibility
sixcow For Minn Kota 1854017 RTA-17 Quick
9.4/10 our score
See it on Amazon -
3
Best for jack plate mounting
Minn Kota 1810340 Talon Jack Plate Adapter
9.4/10 our score
See it on Amazon
Frequently asked questions
What is the best Minn Kota Talon mounting bracket?
The Sunluway 1854021 MKA-21 is the strongest general quick-release pick here for compatible Minn Kota trolling motors. Choose the Minn Kota 1810340 when you need jack plate side mounting, or the Minn Kota Talon Tilt Bracket when the main problem is temporary overhead clearance.
Can a Minn Kota Talon mount directly to a jack plate?
Yes. The Minn Kota 1810340 Talon Jack Plate Adapter mounts a Talon directly to the side of a jack plate on either the port or starboard side of the boat.
Check the available space and mounting surface before drilling, because jack plate layouts vary.
What is a Minn Kota Talon sandwich bracket?
A sandwich bracket places mounting parts around or between structural surfaces to create a secure mounting position. Before choosing one, compare the Talon adapter, transom shape, jack plate position and clearance for raising, lowering and tilting the anchor.
Can a Talon Tilt Bracket be used while trailering?
No. The Minn Kota Talon Tilt Bracket is for temporary clearance in low garages, under bridges or similar areas.
It is not intended for transport on the water or trailering while tilted, and it requires a Talon adapter bracket.
Do Minn Kota Talon brackets fit every Talon?
No. Compatibility depends on the bracket type and the Talon mounting arrangement.
Match the part number, adapter style and boat layout before drilling.
A jack plate bracket, tilt bracket and transom setup solve different clearance and mounting problems.
