9 Best Tall Fish Finder Mounts (November 2026)
The best tall fish finder mounts include the RAM MOUNTS Fish Finder and Chartplotter Mount for compact adjustable setups, the Bzcovac Marine Electronic Mount for adjustable console height, and the RAM MOUNTS Fish Finder and Marine Electronics for a short swing arm.
On this page (6 sections)
The best tall fish finder mount for most boats is the Bzcovac Marine Electronic Mount, with a riser adjustable from 18 to 24 inches and swivel movement at the plate and base. For a long adjustable arm, choose WINDFRD; for larger displays, consider its telescopic mount rated for screens up to 16 inches.
A taller position can make a sonar display easier to read while standing or when it sits below your natural sightline. The right choice depends on how much height you need, how the mount attaches, and whether the screen and plate are compatible.
If you need a general overview before choosing height, see our guide to the best fish finder mount.
Our picks at a glance
-
1
Best for compact adjustable setupsRAM MOUNTS Fish Finder and Chartplotter Mount
9.2/10 our score
See it on Amazon -
2
Best for adjustable console heightBzcovac Marine Electronic Mount
9.1/10 our score
See it on Amazon -
3
Best for a short swing armRAM MOUNTS Fish Finder and Marine Electronics
9.0/10 our score
See it on Amazon
- 4
Check itWINDFRD Aluminum Fish Finder Mount for Boat
Best for a long adjustable arm - 5
Check itVAUBORTTI Aluminum Fish Finder Mount with 1.5''
Best for a 14.76 in extension - 6
Check itxik 9.1 Inch Long Arm Aluminum Alloy
Best for a mid-length ball arm - 7
Check itWINDFRD Telescopic Fish Finder Mount for 5"-16"
Best for larger displays - 8
Check itVelpaw 20.7” Telescoping Fish Finder Mount
Best for bow deck height changes - 9
Check itVAZESWIN 2.25" Ball Large Heavy-Duty Aluminum Alloy
Best for a larger ball system
Which tall fish finder mount fits your setup?
The Bzcovac is the clearest choice when you want a defined adjustable riser, while the WINDFRD telescopic model gives a taller range for larger screens. A long ball arm works when you need reach and angle adjustment more than a set riser height.
RAM MOUNTS Fish Finder and Chartplotter Mount: Best for compact adjustable setups
- 5.225 in overall height
- Ball-and-socket adjustment
- Powder-coated marine-grade aluminum
- Lifetime warranty
A short arm and ball-and-socket joint make this a flexible choice when you need to fine-tune screen angle on a flat surface. Its stated overall height is compact, so it is not the pick for a substantial lift.
Pros
- Near-infinite positioning adjustment
- Marine-grade aluminum
- Lifetime warranty
Cons
- 5.225 in overall height is limited for a tall position
- Requires drill-down mounting
RAM MOUNTS’ short-arm option has a stated overall height of 5.225 inches, so it is better for fine positioning than a genuinely tall installation. Its ball-and-socket joint allows near-infinite adjustment, which can help aim a display after you choose the mounting spot.
The mount is designed for drill-down installation on a flat surface and uses powder-coated, marine-grade aluminum. RAM MOUNTS backs it with a lifetime warranty.
Choose it when your base is already near the desired height and you mainly need to adjust the display angle. If you need a screen raised well above the console, pick one of the telescoping or extended-arm models below.
Bzcovac Marine Electronic Mount: Best for adjustable console height
- Telescopes from 18 to 24 in
- 350° monitor plate swivel
- 180° base swivel
- 180° riser tilt
The telescoping riser offers a clearly stated 18–24 in height range, with multiple joints for viewing adjustments. Its plate fits many major marine electronics brands.
Pros
- Tall adjustable riser
- Multiple swivel and tilt points
- Stainless steel hardware included
Cons
- 5 lb item weight
- Check the plate hole pattern against your display
Bzcovac is the strongest fit for changing seat or console positions because its riser adjusts from 18 to 24 inches. The monitor plate swivels 350 degrees, the base swivels 180 degrees, and the riser tilts 180 degrees.
The mount uses anodized aluminum and includes stainless steel hardware. For model-specific Garmin options, see ECHOMAP Ultra 2 mounts.
Its drilled plate is described as fitting many popular Garmin, Humminbird, Lowrance, Simrad and Raymarine displays, but you should still compare the hole pattern with your unit.
The 5 lb mount weight is worth considering when you’re planning placement on a lighter console or deck. Choose it when adjustable height is the main goal and the flat surface can support the installation.
RAM MOUNTS Fish Finder and Marine Electronics: Best for a short swing arm
- 6 in swing arm
- Two pivot points
- 360-degree rotation at both pivots
- Powder-coated steel and composite
A 6 in swing arm helps position a display away from its base, and both pivot points rotate fully. Its stated arm length suits modest reach needs rather than a tall riser.
Pros
- Two full-rotation pivots
- Compatible with many named Garmin, Humminbird and Lowrance units
- Lifetime warranty
Cons
- Hardware not included
- Additional plate holes may be needed
This RAM MOUNTS swing arm is a middle ground between a short mount and a tall riser. Its 6 inch arm has two pivot points, each with full 360-degree rotation, so you can move the screen around a horizontal base.
The device plate is a universal bracket with a selection of hole locations. Some installations may need extra holes, and hardware is not included, so check your display and mounting surface before starting.
Choose this design when you need a little more reach and flexible positioning, but not a large lift. It is made from powder-coated steel and high-strength composite and carries a lifetime warranty.
WINDFRD Aluminum Fish Finder Mount for Boat: Best for a long adjustable arm
- 18.3 in C-size double socket arm
- Two ball joints
- 5 lb static load limit
- Recommended for screens up to 7 in
The long double socket arm offers reach and angle adjustment for a raised display position. WINDFRD gives a 5 lb static load limit and recommends screens up to 7 in because longer arms can sag with heavier displays.
Pros
- Long arm with two ball joints
- Marine-grade aluminum and composite
- Mounting hardware included
Cons
- 5 lb static load limit
- Not recommended for larger or heavier screens
WINDFRD’s 18.3 inch C-size double socket arm provides a long reach, with two ball joints for adjustment. Its 2.4 inch round base uses an AMPS hole pattern, and the 6.23 x 2 inch plate has several pre-drilled hole combinations.
The key limit is its stated 5 lb static load. WINDFRD recommends screens up to 7 inches because larger or heavier units may sag or shift on the long arm.
This tall fish finder pole mount is a fit for a lighter display when you want arm-based height and angle control. The package includes marine-grade stainless steel mounting hardware; check the base and plate patterns against your boat and electronics.
VAUBORTTI Aluminum Fish Finder Mount with 1.5'': Best for a 14.76 in extension
- 14.76 in total length
- 1.5 in C-size ball
- Dual-rod extended arm
- Powder-coated aluminum alloy
The extended dual-rod arm brings a display closer to your line of sight, while its C-size ball works with compatible RAM Mounts, Arkon and iBolt components. Confirm your device’s plate pattern before buying.
Pros
- Extended arm for raised viewing
- Large wingnut designed for hand adjustment
- Broad stated device compatibility
Cons
- Does not give a screen weight limit
- Requires a compatible 1.5 in ball system
The VAUBORTTI mount has a 14.76 inch total length and a 1.5 inch C-size ball. Its dual-rod extension aims to bring the device closer to your line of sight, while the oversized wingnut is designed for easier adjustment with wet hands or gloves.
The pre-drilled rectangular plate and AMPS base are described for a range of marine electronics. It is compatible with RAM Mounts, Arkon and iBolt 1.5 inch systems, so check ball size as well as the screen’s mounting holes.
Choose it when a long extension is useful but you prefer a C-size ball setup. The product facts do not give a screen weight capacity, so use a mount with a stated load limit if that is important for your installation.
xik 9.1 Inch Long Arm Aluminum Alloy: Best for a mid-length ball arm
- 9.1 in double socket arm
- 1.5 in C-size ball
- 15.5 lb at-rest capacity
- 4.5 lb in-motion capacity
This 9.1 in arm provides a moderate lift with ball-and-socket adjustment. Its stated capacity drops from 15.5 lb at rest to 4.5 lb in motion, so use the lower figure when considering a boat setup.
Pros
- Double socket arm with 360-degree rotation
- Aluminum construction
- Includes round base and rectangular plate
Cons
- Lower in-motion capacity than at-rest capacity
- Not compatible with several Humminbird Helix and Solix models
The xik mount’s 9.1 inch double socket arm gives moderate added height and full rotation through its 1.5 inch C-size ball. The package includes a round base and rectangular plate for flat-surface installation.
Its stated capacity is 15.5 lb at rest and 4.5 lb in motion. For a moving boat, compare the screen and bracket weight with the lower in-motion figure rather than relying on the at-rest number.
The compatibility notes exclude several Humminbird Helix sizes and the Solix 10. Confirm your exact model before buying, especially if you have one of those displays.
WINDFRD Telescopic Fish Finder Mount for 5"-16": Best for larger displays
- Adjusts from 15 to 20 in
- Rated for 110 lb static and 22 lb dynamic
- All-aluminum construction
- For 5–16 in screens
The telescoping height and stated screen range suit buyers who need a raised position for a larger display. The broad capacity claims make it especially important to check the mounting surface and fasteners for your own boat.
Pros
- Adjustable height
- Stated support for screens up to 16 in
- 316L stainless steel mounting kit included
Cons
- Heavier than compact arm mounts
- Requires a flat-surface installation
The WINDFRD telescopic mount adjusts from 15 to 20 inches and is specified for screens from 5 to 16 inches. It also gives a rated capacity of 110 lb static and 22 lb dynamic, making it the option here with the widest stated screen range.
The aluminum mount uses a flat-surface base and includes a 316L stainless steel mounting kit. Its compatibility notes name many Garmin, Lowrance and Humminbird series, but the drilled plate still needs to match your display.
Choose it when a larger screen needs a raised position and adjustable height. Measure the installation area and check the fastening points before fitting a tall mount to a boat deck or kayak.
Velpaw 20.7” Telescoping Fish Finder Mount: Best for bow deck height changes
- Adjusts from 14.68 to 20.7 in
- Dual 360-degree swivel joints
- 100 lb static and 22 lb dynamic capacity
- Designed for boat decks
The height range and two rotating joints make it suitable for changing screen position between seated and standing use. Velpaw describes it for boat deck installations and says it is not designed for kayak installation.
Pros
- Tool-free height adjustment
- Deck base and installation screws included
- Anodized aluminum
Cons
- Designed for boat decks, not kayaks
- Check the mounting plate pattern for your display
Velpaw adjusts from 14.68 to 20.7 inches, with dual 360-degree swivel joints for repositioning the screen. The included deck base has four mounting slots and screws, and the mount is described for flat boat decks, including bow installations.
Velpaw states a 100 lb static and 22 lb dynamic capacity. Its compatibility notes name select Garmin, Lowrance and Humminbird displays, so verify your model and plate pattern first.
This is a practical choice when you want to move the screen between seated and standing views on a boat. Velpaw says the design is for boat decks, not kayak installation.
VAZESWIN 2.25" Ball Large Heavy-Duty Aluminum Alloy: Best for a larger ball system
- 2.25 in D-size ball
- 8.44 in double socket arm
- 6061-T6 aluminum alloy
- 16 pre-drilled plate holes
The larger D-size ball system gives you an 8.44 in adjustable arm and a plate with multiple hole positions. The package does not include installation screws, so plan to source hardware for your surface.
Pros
- CNC-machined aluminum components
- 360-degree adjustable arm
- AMPS hole pattern on round base
Cons
- Installation screws not included
- Partial compatibility with some Humminbird and Raymarine units
VAZESWIN uses a 2.25 inch D-size ball with an 8.44 inch double socket arm. The rectangular plate has 16 pre-drilled holes, and the 3.7 inch round base has an AMPS hole pattern for flat-surface mounting.
This is a larger ball system than the C-size arms above, so it is not a direct match for 1.5 inch components. The package does not include installation screws, which means you’ll need to source hardware suitable for your surface.
Choose it if you need the D-size system and its adjustable arm. Its compatibility notes exclude several Humminbird Helix and Solix models, so check that list before you buy.
How do you choose a tall fish finder mount?
Choose a mount by its usable height, load capacity, base footprint and device fit. A tall arm can improve viewing position, but it also puts more leverage on the base and fasteners.
Start by measuring the distance from the mounting surface to where you want the screen. For a riser, compare that measurement with its stated adjustment range; for an arm, allow for the angle and joint positions that affect final height.
Then weigh the display and bracket together if possible. Use the dynamic or in-motion limit when one is provided, and leave a margin instead of choosing a mount right at its stated capacity.
Does a fish finder mount need to be tall?
A tall mount helps when the screen sits too low for comfortable viewing from your normal fishing position. If the display is already easy to see, a shorter mount may reduce leverage and keep the installation more compact.
Standing anglers and bow setups may benefit from a raised display, while seated console use may call for less height. For display choices suited to that boat style, see fish finders for bass boats.
Consider the screen’s tilt and glare angle too, since height alone doesn’t guarantee a clear view.
Are telescoping mounts better than pole-style arms?
A telescoping mount is better when you want a direct height range, while a pole-style arm is useful when reach and angle matter. The Bzcovac and WINDFRD telescopic models give stated height ranges; the WINDFRD 18.3 inch arm and VAUBORTTI extension rely on joint positioning.
Check how each mount locks at the chosen position and what capacity it gives. A tall mount that is easy to adjust but does not suit your screen weight or base can be the wrong fit.
What should you check before installing a raised display?
Check the plate hole pattern, ball diameter, base footprint and available flat surface before drilling. Also make sure the raised screen won’t block controls, steering, rods or your view across the water.
For ball systems, match the size: C-size is 1.5 inches, while the VAZESWIN option uses a 2.25 inch D-size ball. If you’re comparing other mounting styles, review best fish finder track mounts for rail setups, best aluminum fish finder mounts for material and base options, and best fish finder gimbal mounts for bracket-based installations.
Which tall fish finder mount should you choose?
Choose the Bzcovac if you want an adjustable 18–24 inch riser, the WINDFRD telescopic mount for a stated 5–16 inch screen range, or a long-arm model when you need reach and angle changes. Compare capacity and fit before deciding, then see best trolling motor transducer mounts if you’re also planning sonar hardware at the motor.
A raised display only helps if you can read it from your fishing position. For context on sonar use, see [Do Fish Finders Really Work?
What to Know](/do-fish-finders-really-work/) and How Does a Castable Fish Finder Work? What to Know, or compare anchor choices in Minn Kota Talon vs Power-Pole.
Our top 3 picks at a glance
-
1
Best for compact adjustable setups
RAM MOUNTS Fish Finder and Chartplotter Mount
9.2/10 our score
See it on Amazon -
2
Best for adjustable console height
Bzcovac Marine Electronic Mount
9.1/10 our score
See it on Amazon -
3
Best for a short swing arm
RAM MOUNTS Fish Finder and Marine Electronics
9.0/10 our score
See it on Amazon
Frequently asked questions
How tall should a fish finder mount be?
Choose a height that puts the screen in your natural line of sight without blocking controls or your view across the water. A telescoping mount gives you room to adjust after installation, while a fixed long arm depends on its mounting position and angle.
Measure from the mounting surface to your preferred screen position before choosing.
Are tall fish finder mounts stable?
Stability depends on display weight, arm length, joints and the surface holding the mount. A longer arm creates more leverage, so check any stated capacity and compare it with the screen and bracket weight.
Use the in-motion capacity where one is given, and secure the base to a suitable surface.
Can I use a tall mount with any fish finder?
No. Check the device plate pattern, screen size and ball system before buying.
Some mounts list compatibility with specific Garmin, Lowrance or Humminbird models, while others use common hole patterns.
A matching brand name alone does not confirm that the holes or bracket will fit.
Should I choose a telescoping mount or a long arm?
Choose a telescoping riser when you want to change height directly, such as between seated and standing positions. A long ball-and-socket arm offers angle and reach adjustment, but the height depends more on how you position the joints.
Also compare the mount's load limit with your screen.
Can a tall fish finder mount go on a kayak?
Some mounts are described for kayaks, but fit depends on the deck layout, base footprint, device weight and available fastening points. Other designs are intended for boat decks only.
Measure the flat mounting area and check the maker's stated use before choosing a mount.
