8 Best Trolling Motor Transducer Mounts (November 2026)

The best trolling motor transducer mounts include the folosem 410150-1 1840201 MKR-15 Transducer Mounting Kit for standard transducer fit, the Lowrance 000-0106-72 Transom-Mount Skimmer Transducer with Built-in for depth and temperature data, and the Lowrance PDT-WBL Trolling Motor-Mount Transducer for simple Lowrance mounting.

On this page (7 sections)

1. The best trolling motor transducer mounts for different setups
2. How do you choose a transducer mount for a trolling motor?
3. Should you use a trolling motor bracket or a pole mount?
4. How should you route and protect the transducer cable?
5. Which transducer mount works with a Minn Kota motor?
6. Can a trolling motor power setup affect transducer performance?
7. Verdict: which trolling motor transducer mount should you choose?

The best trolling motor transducer mount for most standard setups is the folosem MKR-15, which fits several Minn Kota shaft diameters and standard transom-mount transducers from major brands. Choose the Lowrance 000-0106-72 for dual-frequency depth and temperature data, or use a pole mount when you need to rotate and stow live sonar.

The right trolling motor transducer mount depends on more than the bracket shape. Match the shaft or lower-unit size, transducer style, connector, cable length and the way you fish.

For a fixed installation, a lower-unit bracket keeps the transducer close to the trolling motor. For live sonar, a trolling motor transducer pole can give you more control over direction and make it easier to lift the transducer around weeds, rocks and shallow water.

Our picks at a glance

1. 1
   Best for standard transducer fit

   folosem 410150-1 1840201 MKR-15 Transducer Mounting Kit

   9.7/10 our score

   See it on Amazon
2. 2
   Best for depth and temperature data

   Lowrance 000-0106-72 Transom-Mount Skimmer Transducer with Built-in

   9.7/10 our score

   See it on Amazon
3. 3
   Best for simple Lowrance mounting

   Lowrance PDT-WBL Trolling Motor-Mount Transducer

   9.6/10 our score

   See it on Amazon

4. 4

   Stratum Outdoors Deck Stand for Deck Mount Transducer

   Best for deck-mounted sonar poles
   Check it
5. 5

   Garmin Transom/Trolling Motor Mount Dual Beam Transducer

   Best for Garmin dual-beam systems
   Check it
6. 6

   GEATaaT 010-12676-15 0 Degree Livescope Pole Mount

   Best for Panoptix LVS32 poles
   Check it
7. 7

   Johnny Ray Marine Transducer Mount

   Best for offset shaft mounting
   Check it
8. 8

   VINmounts Kayak Fish Finder Mount with Adjustable

   Best for adjustable kayak arms
   Check it

The best trolling motor transducer mounts for different setups

The folosem MKR-15 is the strongest all-around bracket choice, while the Lowrance PDT-WBL is simpler for a compatible Lowrance setup. Pole and kayak mounts make more sense when you need adjustable viewing angles or quick stowage.

We compared mounting style, stated fit, cable details, materials and the kind of installation each product supports. Our score weighs specs, features and buyer feedback against what you're shopping for.

1

folosem 410150-1 1840201 MKR-15 Transducer Mounting Kit: Best for standard transducer fit

9.7/10Our score

• Fits Minn Kota shaft diameters from 3-1/4 to 4-1/2 in
• Works with Humminbird, Garmin, Lowrance and Eagle transducers
• Corrosion-resistant aluminum body
• Stainless steel hardware

This kit is a practical choice when you need to attach a standard through-bolt transducer to a Minn Kota trolling motor. Its aluminum body and stainless steel hardware suit freshwater or saltwater use.

See it on Amazon

Pros

• Several Minn Kota shaft sizes
• Fits major transducer brands
• No drilling or permanent modification

Cons

• Best suited to standard transom-mount transducers
• Confirm shaft diameter before ordering

The folosem MKR-15 is the best starting point when you already own a standard transom-mount transducer and need a trolling motor bracket. It fits Minn Kota bow-mount and transom-mount trolling motors with shaft diameters of 3-1/4, 3-5/8, 4 and 4-1/2 inches.

Its stated compatibility includes Humminbird, Garmin, Lowrance and Eagle transducers with the standard through-bolt mounting style. That makes it more flexible than a mount designed around one sonar family.

The aluminum body and stainless steel hardware are suited to freshwater and saltwater exposure. The mounting approach requires no drilling or permanent modification, so it can be a good choice when you want a clean installation that remains reversible.

Measure the shaft or lower-unit area before ordering. A brand match alone does not confirm that the bracket will fit the exact trolling motor or transducer shape.

2

Lowrance 000-0106-72 Transom-Mount Skimmer Transducer with Built-in: Best for depth and temperature data

9.7/10Our score

• 83/200 kHz dual-frequency operation
• Up to 1,000 ft at 83 kHz
• Built-in temperature sensor
• 20 ft cable

This Lowrance skimmer adds dual-frequency depth readings and water temperature when your fish finder supports its 7-pin connection. The 20 ft cable gives more routing flexibility on larger boats.

See it on Amazon

Pros

• Built-in temperature sensor
• Deep stated range at 83 kHz
• Long cable

Cons

• Transom-mount design needs a compatible bracket
• 7-pin connection limits system matching

The Lowrance 000-0106-72 is the best choice here when you want a transducer with 83/200 kHz operation and a built-in temperature sensor. At 83 kHz, it has a stated maximum measuring depth of 1,000 feet, while 200 kHz gives a narrower operating option for other conditions.

The built-in temperature sensor adds water-temperature information to a compatible Lowrance fish finder or chartplotter. That can help you compare locations and seasonal changes without adding a separate temperature device.

This is a transom-mount skimmer, so it does not attach directly to every trolling motor without the right bracket or adapter arrangement. The 7-pin connector and 20 ft cable are key fit details, especially when routing from the transom or another mounting point.

Lowrance includes the transducer and mounting bracket. Check the connector on your display before choosing it for a trolling motor installation.

3

Lowrance PDT-WBL Trolling Motor-Mount Transducer: Best for simple Lowrance mounting

9.6/10Our score

• 200 kHz frequency
• Built-in temperature sensor
• 12 ft cable
• Plastic housing
• Contour curve and hose-clamp slot

The PDT-WBL is made for a direct trolling motor setup, with a curved top and hose-clamp slot that simplify positioning. Its 12 ft cable suits many smaller and mid-size installations.

See it on Amazon

Pros

• Purpose-built trolling motor shape
• Built-in temperature sensor
• Straightforward hose-clamp mounting

Cons

• Plastic housing
• Confirm fish-finder compatibility before connecting

The Lowrance PDT-WBL suits anglers who want a purpose-built trolling motor-mount transducer with a built-in temperature sensor. Its contour curve and hose-clamp slot are shaped to simplify mounting around a trolling motor.

The unit operates at 200 kHz and uses a plastic housing. Its 12 ft cable gives enough reach for many smaller and mid-size boats, but measure your routing path before installation so the cable does not pull tight during steering.

This pick makes more sense when your display is already compatible with the Lowrance transducer. The product data identifies several Lowrance HDS, LCX and related models, but your exact fish finder should still be checked before connection.

Use a clamp or mounting method that keeps the transducer aligned with the boat's direction. Avoid placing the cable where it can catch on the motor shaft or propeller.

4

Stratum Outdoors Deck Stand for Deck Mount Transducer: Best for deck-mounted sonar poles

9.4/10Our score

• 360-degree swivel and tilt
• Adjustable sliding arm
• Bolt-plate mounting
• Mild steel construction
• Stand only

This stand suits a boat that uses a separate transducer pole rather than a fixed lower-unit bracket. Its swivel, tilt and sliding arm help position the pole from a deck, bench or gunnel.

See it on Amazon

Pros

• 360-degree adjustment
• Sliding arm for wider gunnels
• Bolt-down installation

Cons

• Pole is not included
• Mild steel needs sensible marine care

The Stratum Outdoors deck stand is the best option here for a separate transducer pole mounted to a deck, bench or gunnel. It is a stand only, so the pole must be bought separately.

Three blue adjustment knobs allow 360-degree swivel and tilt. The sliding arm extends outward for wider gunnels, which helps you place the pole away from the boat side without relying on a fixed position.

The stand uses a bolt plate and mild steel construction. Plan the bolt location carefully, because the stand needs a solid mounting surface and enough room for the arm to move.

This style is useful for live sonar systems where the viewing direction changes throughout the day. It is less suitable if you want a small bracket attached directly to the trolling motor lower unit.

5

Garmin Transom/Trolling Motor Mount Dual Beam Transducer: Best for Garmin dual-beam systems

9.1/10Our score

• 77 to 200 kHz operating frequency
• 45 to 15 degree beam width
• 0 to 70 degree transom mount
• Works with listed Garmin echo, echoMAP and Striker units

This Garmin dual-beam unit fits buyers who want a replacement transducer for compatible Garmin sounders. Its frequency and beam-width range supports a broad view at one end and a narrower beam at the other.

See it on Amazon

Pros

• Dual-beam design
• 77 to 200 kHz range
• Works with several Garmin sounder families

Cons

• Some Garmin sounders need an adapter cable
• Confirm the exact connector and unit

The Garmin dual-beam transducer is the best fit for compatible Garmin systems that need a replacement or alternate transducer. It operates from 77 to 200 kHz and uses beam widths from 45 to 15 degrees.

The wider beam can cover more water, while the narrower beam concentrates the signal more tightly. The practical choice depends on the Garmin sounder and the type of bottom or fish coverage you want to view.

Garmin identifies compatibility with echo, echoMAP CHIRP 42dv through 55dv models and Striker units. A 6-pin Garmin sounder needs adapter cable 010-11614-00, while echoMAP 50s and 70s units need adapter cable 010-11948-00.

The mount is described as transom or trolling motor compatible. Confirm the exact unit and cable before attaching it to your motor.

6

GEATaaT 010-12676-15 0 Degree Livescope Pole Mount: Best for Panoptix LVS32 poles

8.8/10Our score

• 0-degree pole mount
• For Panoptix LVS32 transducer
• Aluminum construction
• For open-water or ice fishing setups

This mount is for a very specific live-sonar setup built around the Panoptix LVS32. The 0-degree position suits buyers who want that transducer aligned on a pole for open water or ice fishing.

See it on Amazon

Pros

• Clear LVS32 fit
• Aluminum construction
• 0-degree orientation

Cons

• Not a general-purpose transducer bracket
• Compatibility is limited to the LVS32 setup

The GEATaaT 010-12676-15 is a specialized 0-degree pole mount for the Panoptix LVS32 transducer. It suits anglers using a Panoptix LiveScope Ice Fishing Bundle or Panoptix LiveScope System.

Its aluminum construction keeps the mount focused on that specific live-sonar setup. The 0-degree orientation gives the LVS32 a defined mounting angle rather than the broad adjustment range of a swivel deck stand.

This is not a general trolling motor transducer mount. Choose it only after confirming that your transducer is the LVS32 and that the pole or shaft arrangement accepts this mount.

For open-water use, check that the pole position leaves enough room to rotate or lift the transducer. For ice fishing, keep the cable and mount clear of the hole edge when moving between spots.

7

Johnny Ray Marine Transducer Mount: Best for offset shaft mounting

8.3/10Our score

• Aircraft-grade aluminum
• Black powder coating
• Offsets the transducer beside the motor
• Fits 1-1/8 in shafts
• Stainless steel hardware

The Johnny Ray bracket places the transducer beside the motor instead of directly in its path. Its aluminum body and powder-coated finish suit buyers who want a compact offset bracket for a 1-1/8 in shaft.

See it on Amazon

Pros

• Offset design
• Aircraft-grade aluminum
• Stainless steel hardware included

Cons

• Fit is tied to a 1-1/8 in shaft
• Check the transducer shape before installation

The Johnny Ray Marine Transducer Mount is the best choice here for an offset installation beside the motor. Its design places the transducer away from the motor instead of directly below the shaft.

The bracket is die-formed from aircraft-grade aluminum and has a black powder-coated finish. It fits 1-1/8 in shafts, including listed Minn Kota, Silvertrol, Pfluger and Ram shafts.

Stainless steel hardware is included. The offset shape can help when you want to keep the transducer clear of the motor path, but it also means you must check the transducer body and cable exit before tightening the bracket.

This mount is more specialized than the folosem kit. Pick it when the 1-1/8 in shaft fit and offset position solve a specific installation problem.

8

VINmounts Kayak Fish Finder Mount with Adjustable: Best for adjustable kayak arms

8.0/10Our score

• Telescoping arm from 11.42 to 17.91 in
• Quick-stow pivot
• High-impact composite base
• Fits listed Garmin, Lowrance and Humminbird units
• 18 lb maximum capacity

This arm suits kayak anglers who need to lower a transducer below the hull and lift it for launch, shallow water or transport. Its adjustable length helps account for different freeboard heights.

See it on Amazon

Pros

• Quick-stow pivot
• Adjustable arm length
• Compatible with listed Garmin, Lowrance and Humminbird units

Cons

• Designed for kayak mounting
• Base and arm dimensions need to fit your kayak

The VINmounts arm is the best option here for a kayak that needs an adjustable and removable transducer mount. Its telescoping arm extends from 11.42 to 17.91 inches, allowing you to adjust the transducer position for different kayak freeboards.

The arm pivots up and out of the water for launching, beaching and shallow areas. It can also be detached from the mounting base for transport, which reduces the chance of snagging the arm while loading the kayak.

The high-impact composite base is designed to reduce weight, while the arm and hardware use aluminum and stainless steel. VINmounts identifies compatibility with Garmin Striker 4, Striker Plus 4, Striker Vivid 4cv, ECHOMAP Plus 43cv and 44cv, Lowrance Elite and Hook series, and Humminbird Helix 5.

The maximum stated capacity is 18 lb. Check the base position, arm reach and display connection before using it on your kayak.

How do you choose a transducer mount for a trolling motor?

Choose the mount by matching the transducer shape and shaft dimensions first. Then check the cable path, connector, mounting direction and whether you need a fixed bracket or an adjustable pole.

A standard transducer mount for a trolling motor usually works best when the transducer sits straight and stays clear of the propeller. The folosem kit is useful for standard transom-mount transducers, while the Lowrance PDT-WBL has a shape made for a trolling motor.

Measure the shaft or lower unit where the bracket will sit. The folosem kit covers 3-1/4 to 4-1/2 in shaft diameters, while the Johnny Ray bracket is for a 1-1/8 in shaft.

For a wider installation, read our guide on how to mount a transducer on a trolling motor. It covers placement, alignment and cable routing decisions that apply across bracket styles.

Should you use a trolling motor bracket or a pole mount?

Use a trolling motor bracket for a compact fixed installation, and choose a pole mount when you need to rotate, tilt, lower or quickly lift the transducer. A pole usually gives more control, but it needs more mounting space and careful cable routing.

The Stratum Outdoors deck stand is made for a separate pole and bolts to a deck, bench or gunnel. The GEATaaT mount is more specialized because it is made for the Panoptix LVS32 on a pole.

A bracket can be easier to keep aligned with the boat. A pole can be better for live sonar because you can change the viewing direction without changing the trolling motor's heading.

If you use a Lowrance system, compare the options in our guide to the best Lowrance trolling motor transducer mount. Connector fit still matters even when the bracket dimensions are correct.

How should you route and protect the transducer cable?

Route the cable with enough slack for steering, tilt and stowage, then secure it away from the propeller, shaft joints and sharp edges. Leave a smooth bend rather than folding the cable tightly against the mount.

A cable that is too short can pull at the connector when the motor moves. A cable that hangs loose can catch on weeds, hardware or the boat edge.

Inspect the cable after launching, trailering and changing the motor position. Use clips or straps that hold the cable without crushing the insulation, and keep the connector dry during storage.

For more cable-management ideas, see our guide to transducer cable clips for trolling motors.

Which transducer mount works with a Minn Kota motor?

The folosem MKR-15 is the broadest Minn Kota option in this group because it fits shaft diameters from 3-1/4 to 4-1/2 inches and accepts standard transom-mount transducers from several brands. The Johnny Ray bracket fits a narrower 1-1/8 in shaft size.

Minn Kota systems can also use integrated US2 transducers, which changes the connection and mounting decision. If your motor has US2, check what fish finders work with US2 transducers before adding an external transducer.

For a Terrova setup, display compatibility and cable routing deserve extra attention. Our guide to the best fish finders for Minn Kota Terrova can help you compare the sonar side before choosing a mount.

Can a trolling motor power setup affect transducer performance?

A trolling motor's power wiring should be kept separate from sensitive transducer and display cables where practical. Correct battery wiring helps the motor receive the intended voltage, but it does not replace careful sonar cable routing.

Keep power cables secure and inspect connectors for moisture or corrosion. Before changing a 24V system, follow a wiring plan such as our guide to how to wire a 24V trolling motor.

The mount itself still needs a firm position. A stable bracket cannot correct a loose cable, poor connector match or transducer that is angled away from the water.

Verdict: which trolling motor transducer mount should you choose?

Choose the folosem MKR-15 for the most flexible standard bracket fit, especially on a Minn Kota motor with a compatible shaft diameter. Pick the Lowrance 000-0106-72 when dual-frequency operation, temperature data and a 20 ft cable matter most.

Choose the Lowrance PDT-WBL for a simple Lowrance trolling motor setup. Use the Stratum Outdoors deck stand when you want a separate pole with swivel and tilt, the GEATaaT for a Panoptix LVS32 pole, or the VINmounts arm for an adjustable kayak installation.

The correct trolling motor transducer mount is the one that fits your shaft, transducer, connector and cable path before it ever reaches the water.

Our top 3 picks at a glance

1. 1
   Best for standard transducer fit

   folosem 410150-1 1840201 MKR-15 Transducer Mounting Kit

   9.7/10 our score

   See it on Amazon
2. 2
   Best for depth and temperature data

   Lowrance 000-0106-72 Transom-Mount Skimmer Transducer with Built-in

   9.7/10 our score

   See it on Amazon
3. 3
   Best for simple Lowrance mounting

   Lowrance PDT-WBL Trolling Motor-Mount Transducer

   9.6/10 our score

   See it on Amazon

Frequently asked questions

What is the best trolling motor transducer mount?

The folosem MKR-15 is the best general choice here for standard transom-mount transducers on Minn Kota trolling motors. It fits shaft diameters from 3-1/4 to 4-1/2 inches and accepts transducers from Humminbird, Garmin, Lowrance and Eagle.

Choose a Lowrance or Garmin transducer instead when the sonar unit and connector matter more than bracket flexibility.

Can you mount a transducer to a trolling motor?

Yes. A trolling motor transducer mount can attach to the lower unit, shaft or a separate pole, depending on the transducer and motor.

Check the shaft diameter, transducer shape, cable length and fish-finder connector before installing.

The mount should hold the transducer straight and keep the cable away from moving parts.

What is the difference between a bracket and a pole mount?

A bracket usually holds the transducer directly on the trolling motor or a fixed mounting point. A pole mount places the transducer on a separate arm that can rotate, tilt, lower or lift.

Brackets are compact, while pole mounts give more control over viewing direction and stowage.

How do I protect a trolling motor transducer cable?

Route the cable with enough slack for steering and tilt, then secure it so it cannot touch the propeller, shaft joints or sharp edges. Avoid tight bends and inspect the cable after transport.

Our guide to transducer cable clips for trolling motors covers cable management options.