Best picks

9 Best Fish Finder Dash Mounts (November 2026)

Updated on · By the Fish Finder Critic team

The best fish finder dash mounts include the Scotty 0163 Ball-Mount Fish Finder and Universal for 7 to 9 inch screens, the Hawkeye DepthTrax 2B Boat Mount in Dash for a true in-dash display, and the RAM MOUNTS Fish Finder and Marine Electronics for swing arm reach.

On this page (9 sections)
  1. How we compared these fish finder dash mounts
  2. The best fish finder dash mounts, ranked by score
  3. Do fish finders really work from a dash mount?
  4. How does a castable fish finder work compared with a dash mount?
  5. What size screen should a dash mount hold?
  6. Dash mount, ball mount or swing arm: which style fits your boat?
  7. How do I choose the best fish finder dash mount for my console?
  8. How do I install and care for a dash mount?
  9. What is the best fish finder dash mount to buy?

The best fish finder dash mount for most boats is the Scotty 0163 Ball-Mount Fish Finder and Universal, with a 1.5 inch ball and plate for 7 to 9 inch screens. Pick the RAM MOUNTS swing arm if you need reach, and pick a PROcise DEK-It plate if your console is flat and you want a fixed position.

A dash mount has two jobs. It must hold your screen steady in chop, and it must put the screen where you can read it without glare.

A mount that is strong but angled wrong will frustrate you every trip.

For broader placement ideas, start with our guide to where to mount fish finder on boat. That guide covers helm, bow and side console layouts before you drill any holes.

If you run a different boat type, our best fish finder mount for pontoon boat guide covers the wide, flat rails and fences common on pontoons, which change your options.

Our picks at a glance

  1. 1 Scotty 0163 Ball-Mount Fish Finder and Universal
    Best for 7 to 9 inch screens

    Scotty 0163 Ball-Mount Fish Finder and Universal

    9.7/10 our score

    See it on Amazon
  2. 2 Hawkeye DepthTrax 2B Boat Mount in Dash
    Best for a true in-dash display

    Hawkeye DepthTrax 2B Boat Mount in Dash

    9.1/10 our score

    See it on Amazon
  3. 3 RAM MOUNTS Fish Finder and Marine Electronics
    Best for swing arm reach

    RAM MOUNTS Fish Finder and Marine Electronics

    9.0/10 our score

    See it on Amazon
  1. 4EDSRDPLT Fish Finder Mount Base

    EDSRDPLT Fish Finder Mount Base

    Best for kayak and boat use
    Check it
  2. 5OUBULU Fish Finder Mount with Heavy Duty

    OUBULU Fish Finder Mount with Heavy Duty

    Best for screens up to 12 inches
    Check it
  3. 6RAM MOUNTS Fish Finder and GPS Mount

    RAM MOUNTS Fish Finder and GPS Mount

    Best for a compact drill-down
    Check it
  4. 7PROcise Outdoors DEK-It Boat Fish Finder Mount

    PROcise Outdoors DEK-It Boat Fish Finder Mount

    Best for a flat single dash plate
    Check it
  5. 8Angled Fish Finder Deck Mount by PROcise

    Angled Fish Finder Deck Mount by PROcise

    Best for seated viewing angle
    Check it
  6. 9PROcise Outdoors Dual Dash MountCheck it

How we compared these fish finder dash mounts

We compared specs, screen limits, materials, arm length, rotation, mounting type and stated compatibility. Our score weighs specs, features and buyer feedback against what you're shopping for.

We also checked what each product really is. One item here is a complete in-dash depth finder, not a bracket.

A few others are deck mounts, not dash mounts. We kept them because many buyers cross shop between those styles.

We did not test these mounts on a boat. Facts below come from the product data for each item, and trade-offs note where a design gives up adjustment for rigidity, or reach for simplicity.

The best fish finder dash mounts, ranked by score

Scotty 0163 Ball-Mount Fish Finder and Universal Mounting Plate, Black

1

Scotty 0163 Ball-Mount Fish Finder and Universal: Best for 7 to 9 inch screens

Scotty 0163 Ball-Mount Fish Finder and Universal, fish finder dash mounts
9.7/10Our score
  • 1.5-inch ball mount
  • Plate for large fish finders (7-9 in)
  • 6.5 in tall mount
  • 2.25 x 2.25 in base

A ball mount that holds 7 to 9 inch fish finders on a small square base, with smooth full range motion for angle changes.

See it on Amazon

Pros

  • Plate sized for 7 to 9 in screens
  • Small 2.25 in square base
  • Smooth ball motion

Cons

  • Ball system needs matching parts for other uses
  • Fixed 6.5 in height

This Scotty suits a boat with a 7 to 9 inch fish finder and a small work area near the helm. The top plate accepts large fish finders from 7 to 9 inches, so check your screen size before you order.

The 1.5 inch ball gives a bigger clamping surface than a small ball. You get smooth motion through a full range, then a firm hold once you tighten it.

That matters when you change from sitting to standing, or when chop makes a loose screen bounce.

The base is only 2.25 by 2.25 inches and the mount stands 6.5 inches tall. That small footprint fits on a dash edge or a flat panel where a swing arm would overhang.

The trade-off is height. You cannot raise the screen much above the dash.

Scotty lists boat, car and truck use, and the build is water resistant plastic in black. The package is described as a complete 1.5 inch ball mounting system with a fish finder and universal mounting plate.

Against the RAM drill-down mounts, you give up a swing arm's reach. Against the PROcise plates, you gain tilt and rotation but lose the fixed rigidity of a flat plate.

Scotty 0163 Ball-Mount Fish Finder and UniversalCheck it on Amazon

Hawkeye DepthTrax 2B Boat Mount in Dash Digital Depth Finder

2

Hawkeye DepthTrax 2B Boat Mount in Dash: Best for a true in-dash display

Hawkeye DepthTrax 2B Boat Mount in Dash, fish finder dash mounts
9.1/10Our score
  • In-dash digital depth finder
  • 2.5 to 600 feet range
  • Polarized LCD display
  • Dual mount transducer

Not a bracket for another screen, this is a complete in-dash depth sounder with a polarized display and warning system.

See it on Amazon

Pros

  • Complete in-dash depth unit
  • Reads to 600 feet
  • No-glare polarized display

Cons

  • Does not hold a separate fish finder
  • Glue-in transducer has hull limits

This Hawkeye suits an angler who wants depth only, in a clean in-dash cutout. It is not a mount for your existing fish finder.

It is a complete digital depth sounder with its own display.

The display gives depth readings from 2.5 to 600 feet at a 200 kHz transducer frequency. The polarized LCD is designed to cut glare, so you can read it with or without sunglasses.

A storage sun cover is part of the package.

The warning system uses an audible alarm, a bright red LED and LCD indicators. That helps when you run into shallow water fast.

The transducer can be transom mounted or glued inside the hull. Glue-in use is only for non-cored fiberglass or aluminum hulls thinner than 1/8 inch.

This is the right pick only if a dedicated depth readout is your goal. Readings update four times per second, and the face and bezel system allows custom matching to most dash layouts.

If you already own a fish finder with depth, a bracket like the Scotty or RAM will cost less and show more data. It also avoids a new dash cutout and new transducer wiring.

Hawkeye DepthTrax 2B Boat Mount in DashCheck it on Amazon

RAM MOUNTS Fish Finder and Marine Electronics Swing Arm Mount

3

RAM MOUNTS Fish Finder and Marine Electronics: Best for swing arm reach

RAM MOUNTS Fish Finder and Marine Electronics, fish finder dash mounts
9.0/10Our score
  • 6 in swing arm
  • Two pivot points, 360 degree rotation
  • Powder-coated steel and composite
  • Lifetime warranty

A drill-down swing arm with two pivots, so you can swing the screen in and out for viewing and reach.

See it on Amazon

Pros

  • 6 in swing arm for reach
  • Two pivots for fine aiming
  • Lifetime warranty

Cons

  • Hardware not included
  • May need extra drilled holes

This RAM swing arm suits a helm where you need to move the screen toward you, then swing it away when you dock. The 6 inch swing arm with two pivot points gives reach that a flat plate cannot match.

Each pivot rotates a full 360 degrees. You can aim the screen at the driver, then turn it toward a passenger for a quick look.

The arm and plate are powder-coated steel and high-strength composite, and RAM backs it with a lifetime warranty.

Compatibility covers Garmin echoMAP, GPSMAP and Striker, Humminbird Helix, Lowrance HDS Carbon, HDS LIVE and HOOK, and Raymarine fish finders and chartplotters. That wide list matters if you switch brands later.

The device end uses a rectangular 6.25 by 2 inch plate on a horizontal surface base. The trade-off is install work.

Hardware is not included, and the universal plate may need extra holes drilled for your device. A swing arm also takes more dash space when extended than a ball mount on a 2.25 inch base.

RAM MOUNTS Fish Finder and Marine ElectronicsCheck it on Amazon

EDSRDPLT Fish Finder Mount Base

4

EDSRDPLT Fish Finder Mount Base: Best for kayak and boat use

EDSRDPLT Fish Finder Mount Base, fish finder dash mounts
9.0/10Our score
  • 360 degree rotating bracket
  • 1.5 inch ball joint
  • Marine-grade composite
  • AMPS universal pattern

A lightweight dual ball bracket for boat and kayak use, with a 38mm AMPS pattern and stainless steel bolts.

See it on Amazon

Pros

  • Lightweight composite build
  • Dual ball adjustment
  • AMPS pattern for easy fit

Cons

  • Not compatible with listed Humminbird Helix models
  • Best for screens 9 in or less

This EDSRDPLT suits a boat or kayak where weight matters and you want a simple ball bracket. The dual ball joint system rotates 360 degrees, so you can set any viewing angle and tighten it down.

The 1.5 inch ball gives strong clamping force for chop. The build is marine-grade composite with stainless steel bolts, which keeps weight low and resists corrosion and UV wear.

The AMPS pattern with a 38mm hole center distance fits many fish finders.

Compatibility is the key check. It fits listed Garmin and Lowrance models, plus Raymarine Element 7 and Axion 7 and 9 on a partial basis.

It is not compatible with Humminbird Helix 5, 7, 8, 10, 12, 15 or Solix 10. That exclusion is a deal breaker for many Helix owners.

The maker recommends screens of 9 inches or less, with care on 9 to 12 inch units, and no use above 12 inches. The base and bracket can be separated for setup on boats or kayaks.

Against the Scotty, this mount is lighter and more portable. Against the RAM swing arm, it gives up reach.

EDSRDPLT Fish Finder Mount BaseCheck it on Amazon

OUBULU Fish Finder Mount with Heavy Duty Swing Arm

5

OUBULU Fish Finder Mount with Heavy Duty: Best for screens up to 12 inches

OUBULU Fish Finder Mount with Heavy Duty, fish finder dash mounts
8.8/10Our score
  • Holds screens from 5 to 12 in
  • 110 lb static capacity
  • Solid aluminum build
  • 360 degree rotation

A heavy duty swing arm in solid aluminum, rated to hold large screens up to 12 inches in rough water.

See it on Amazon

Pros

  • Holds up to 12 in screens
  • 110 lb static rating
  • Stainless steel hardware included

Cons

  • Heavier than composite options
  • Needs a flat surface for the base

This OUBULU suits an angler with a large screen who needs a swing arm that will not flex. It holds screens from 5 to 12 inches in solid aluminum, rated at 110 lb static and 22 lb dynamic load.

Two pivot points give full 360 degree rotation. You can swing the screen out for viewing, then push it back against the dash for running.

The base fits any flat surface, including boat dashboards and kayak decks.

Powder-coated marine-grade aluminum and 316 stainless steel hardware are built for salt spray and high saltwater corrosion. The package includes 316 stainless steel machine screws, lock nuts and sheet metal screws for installation.

That hardware in the box is a plus over mounts that require a separate hardware purchase.

Compatibility covers Garmin ECHOMAP UHD, UHD2, Ultra, GPSMAP, Striker Plus and Striker Vivid, Lowrance HDS Carbon, HDS LIVE, HDS PRO, Hook Reveal and Elite FS, and Humminbird Helix 8, 9, 10 and Solix 10. The pre-drilled plate also supports GPS and radios.

The trade-off is weight and size. This is a heavy duty arm, not a light kayak bracket.

OUBULU Fish Finder Mount with Heavy DutyCheck it on Amazon

RAM MOUNTS Fish Finder and GPS Mount with Medium Arm, Drill-Down Base

6

RAM MOUNTS Fish Finder and GPS Mount: Best for a compact drill-down

RAM MOUNTS Fish Finder and GPS Mount, fish finder dash mounts
8.5/10Our score
  • Medium arm, 4.66 in
  • 7.35 in overall height
  • Marine-grade aluminum
  • Lifetime warranty

A compact drill-down ball mount at 7.35 inches tall, with near-infinite adjustment for small consoles.

See it on Amazon

Pros

  • Compact 7.35 in height
  • Ball and socket adjustment
  • Lifetime warranty

Cons

  • Hardware not included
  • May need extra holes for your device

This RAM medium arm suits a smaller console where a 6 inch swing arm would be too long. The overall height is only 7.35 inches, with a 4.66 inch arm, so it sits close to the dash.

Ball and socket technology gives near-infinite adjustment. You can tilt the screen up or down and rotate it with one hand, then lock it in place.

The build is powder-coated marine-grade aluminum, and RAM backs it with a lifetime warranty.

The drill-down base needs a flat surface and mounting hardware is not included. The hole pattern is 4-hole AMPS at 1.181 by 1.496 inches, plus a 3-hole 120-degree pattern at 1.812 inches diameter.

The universal plate has a selection of hole locations, but some devices still need extra holes drilled.

Compatibility covers listed Garmin ECHOMAP Plus and GPSMAP models, Lowrance HDS Carbon 7 and HDS LIVE 7, plus Humminbird and Raymarine fish finders and chartplotters. The 16 ounce weight keeps dash load low.

Against the RAM swing arm, you lose reach but gain a lower profile. Against the Scotty, you gain a drill-down base with a lifetime warranty.

RAM MOUNTS Fish Finder and GPS MountCheck it on Amazon

PROcise Outdoors DEK-It Boat Fish Finder Mount

7

PROcise Outdoors DEK-It Boat Fish Finder Mount: Best for a flat single dash plate

PROcise Outdoors DEK-It Boat Fish Finder Mount, fish finder dash mounts
8.4/10Our score
  • Single unit, 10-1/16 in
  • 3/16 in thick aluminum
  • Made in the USA
  • Pre-drilled holes

A flat single dash plate in 3/16 inch aluminum that lifts one screen above the dash on a flat console.

See it on Amazon

Pros

  • Thick 3/16 in aluminum
  • Flat plate clears steering wheel
  • Pre-drilled for major brands

Cons

  • Fixed position, no ball adjustment
  • Single screen only

This PROcise DEK-It suits a flat-faced console where you want one screen in a fixed position. The single unit is 10-1/16 inches long in 3/16 inch thick aluminum, made in the USA.

A flat plate raises your screen above the dash, which can clear steering wheel obstruction. Pair it with a gimbal mount for tilt if you need to fight glare.

Pre-drilled holes fit Humminbird, Lowrance and Garmin electronics, or you can drill your own for a custom fit.

The maker describes it as tournament tested for rough runs, with bolts, washers and lock nuts to prevent bounce and wire wear. That rigid build is the point.

There is no ball joint to loosen, and no arm to swing into the wind.

The trade-off is adjustment. You cannot tilt or rotate the screen after install.

If your seating position changes, or glare shifts through the day, a ball mount handles that better. This plate also locks you into the single screen size that fits the 10-1/16 inch length.

It weighs 8.8 ounces, so it adds little load to the console.

PROcise Outdoors DEK-It Boat Fish Finder MountCheck it on Amazon

Angled Fish Finder Deck Mount by PROcise Outdoors

8

Angled Fish Finder Deck Mount by PROcise: Best for seated viewing angle

Angled Fish Finder Deck Mount by PROcise, fish finder dash mounts
8.2/10Our score
  • 22.5 degree angled platform
  • Marine-grade aluminum
  • 15.5 x 5.5 x 4.5 in
  • Lifetime warranty

An angled deck mount that tilts the screen 22.5 degrees toward you, which helps when you sit or stand.

See it on Amazon

Pros

  • 22.5 degree tilt reduces glare
  • Rigid aluminum build
  • Pre-drilled alignment

Cons

  • Deck mount, not a dash mount
  • Fixed angle only

This PROcise angled mount suits a bass boat deck where seated viewing is your main use. The 22.5 degree angled platform tilts the screen toward you, which cuts glare and puts the display in your line of sight.

Dimensions are 15.5 by 5.5 by 4.5 inches in marine-grade aluminum with a corrosion-resistant powder coat. The maker rates it for rigidity and vibration control during high-speed runs.

Pre-drilled holes give fast, accurate alignment on the deck.

Compatibility covers Garmin, Lowrance and Humminbird fish finders. The streamlined profile saves deck space and keeps wiring organized, which matters on a bass boat deck crowded with a trolling motor pedal and rods.

The package includes marine hardware for deck installation.

Note the mount type. This is a deck mount, not a dash mount.

It bolts to the deck, not the console face. That makes it a good option if you want the screen low and tilted, but a poor fit if your dash is the only flat surface you have.

The angle is fixed at 22.5 degrees, so standing use may feel off. A lifetime warranty is listed.

Angled Fish Finder Deck Mount by PROciseCheck it on Amazon

PROcise Outdoors Dual Dash Mount

9

PROcise Outdoors Dual Dash Mount: Best for dual screens

PROcise Outdoors Dual Dash Mount, fish finder dash mounts
8.0/10Our score
  • Dual mount, 24.75 in long
  • 3/16 in thick aluminum
  • Made in the USA
  • Pre-drilled holes

A 24.75 inch dual dash plate for two screens side by side on a wide flat console.

See it on Amazon

Pros

  • Holds two screens side by side
  • Thick aluminum plate
  • Reduces wire stress

Cons

  • Needs a wide flat console
  • Fixed position, no tilt adjustment

This PROcise dual mount suits a wide console with two screens side by side. The mount is 24.75 inches long in 3/16 inch thick aluminum, made in the USA.

A dual plate lets you run a fish finder and a second display, such as a GPS or depth unit, without two separate brackets. That reduces wire stress because both screens share one rigid plate.

Pre-drilled holes fit Humminbird, Lowrance and Garmin, or you can drill your own.

The maker describes it for punishing boat runs, with bolts, washers and lock nuts to stop loosening in choppy water. The thick plate resists bending under two screens, which a thin bracket may not do.

The trade-off is console width and fixed position. You need a flat-faced console wide enough for 24.75 inches.

You also get no tilt or rotation, so both screens sit at the plate angle. If you need adjustable angles for two screens, two ball mounts will serve you better, even though they take more space.

The 2.2 pound weight reflects the larger plate size.

PROcise Outdoors Dual Dash MountCheck it on Amazon
ProductBest forBall sizeBase dimensionsMount heightOur score
Scotty 0163 Ball-Mount Fish Finder and Universal7 to 9 inch screens1.5 inch2.25 x 2.25 in6.5 in9.7
Hawkeye DepthTrax 2B Boat Mount in Dasha true in-dash display9.1
RAM MOUNTS Fish Finder and Marine Electronicsswing arm reach9.0
EDSRDPLT Fish Finder Mount Basekayak and boat use9.0
OUBULU Fish Finder Mount with Heavy Dutyscreens up to 12 inches8.8
RAM MOUNTS Fish Finder and GPS Mounta compact drill-down8.5
PROcise Outdoors DEK-It Boat Fish Finder Mounta flat single dash plate8.4
Angled Fish Finder Deck Mount by PROciseseated viewing angle8.2
PROcise Outdoors Dual Dash Mountdual screens8.0

Do fish finders really work from a dash mount?

Yes, a dash mount only holds the display, and the transducer does the sonar work. The mount affects readability, not signal quality.

A steady, glare-free screen helps you read returns, but it does not change what the transducer sends.

For background on the sonar side, our guide Do Fish Finders Really Work? What to Know covers what the display can and cannot show.

How Does a Castable Fish Finder Work? What to Know is also useful if you cross shop between boat and castable units.

How does a castable fish finder work compared with a dash mount?

A castable unit sends sonar from a bobber you throw out, with no boat mount at all. A dash mount holds a boat fish finder with a fixed transducer.

They solve different problems.

Choose a dash mount for a boat you fish from often. Choose a castable unit for bank fishing, travel, or a boat with no mounting space.

If you want a portable option for a paddle craft, check how castable units work before you buy a bracket.

What size screen should a dash mount hold?

Match the mount to your screen size first, then check weight. The Scotty plate is for 7 to 9 inch screens.

The OUBULU arm holds 5 to 12 inch screens. The EDSRDPLT works best at 9 inches or less.

What happens if you oversize a mount?

A mount rated for small screens will flex or slip under a large display. Chop makes that worse.

Follow the stated screen limit and weight rating, not just the brand name.

What if your screen is between sizes?

Pick the mount rated for the larger size. A mount that is too large is often sturdier than one that is too small, though it may take more dash space.

Dash mount, ball mount or swing arm: which style fits your boat?

A flat dash plate gives rigidity with no adjustment. A ball mount gives tilt and rotation on a small base.

A swing arm gives reach.

When a flat dash plate wins

Choose the PROcise DEK-It single or dual when your console is flat, you sit in one position, and you want zero movement. The 3/16 inch aluminum plate will not bounce like a loose ball joint.

When a ball mount wins

Choose the Scotty 0163 or RAM medium arm when you change seating positions or fight glare through the day. A ball mount lets you re-aim in seconds.

When a swing arm wins

Choose the RAM swing arm or OUBULU when you need to pull the screen toward you for close reading, then push it away to dock. For a bow-focused setup, our best fish finder bow mounts guide covers the different loads and angles at the bow.

How do I choose the best fish finder dash mount for my console?

Measure your dash before you buy. Check flat width, height above the steering wheel, and clearance for wiring behind the screen.

What should you measure first?

Measure the flat area where the base will sit, the screen width and height, and the distance from your seat to the screen. A 2.25 inch square base fits where a swing arm base will not.

A 24.75 inch dual plate needs a wide console.

How do you handle glare?

Tilt helps more than brightness. Ball mounts let you tilt the screen down to cut sky reflection.

Angled deck mounts fix that tilt at 22.5 degrees. Flat plates rely on position and a gimbal mount for tilt.

If worse glare persists, our best fish finder mount for boat guide covers other bracket styles that may fit your hull and console better.

How do I install and care for a dash mount?

Install on a flat, solid surface with the right hardware for that surface. Drill-down bases need bolts or screws rated for marine use, not drywall anchors.

Tighten ball joints by hand first, set your angle, then snug them down. Check tightness after the first rough run.

On flat plates, use washers and lock nuts where the maker calls for them to stop vibration loosening.

Rinse with fresh water after saltwater use. Wipe powder-coated aluminum and composite brackets dry to limit corrosion.

Check stainless hardware for looseness each season. A loose mount will wear wire insulation where cables flex.

How do you route cable behind a fixed plate?

Leave a service loop behind the screen so tilt or arm movement does not pull the connector. Flat PROcise plates reduce wire stress by holding both screens in one position.

Ball and swing mounts need extra loop length because the screen moves. Dress cable away from sharp plate edges to prevent chafing during vibration.

What is the best fish finder dash mount to buy?

The best fish finder dash mount for most boats is the Scotty 0163 for 7 to 9 inch screens on a small base. Pick the RAM swing arm for reach, the OUBULU for screens up to 12 inches, and the PROcise DEK-It for a rigid flat plate.

If you want a complete in-dash depth unit instead of a bracket, the Hawkeye DepthTrax 2B is the only true in-dash option here. If you need two screens on one plate, the PROcise dual mount is the fit.

Measure your console first, then match the style to how you sit and fish.

Our top 3 picks at a glance

  1. 1 Scotty 0163 Ball-Mount Fish Finder and Universal
    Best for 7 to 9 inch screens

    Scotty 0163 Ball-Mount Fish Finder and Universal

    9.7/10 our score

    See it on Amazon
  2. 2 Hawkeye DepthTrax 2B Boat Mount in Dash
    Best for a true in-dash display

    Hawkeye DepthTrax 2B Boat Mount in Dash

    9.1/10 our score

    See it on Amazon
  3. 3 RAM MOUNTS Fish Finder and Marine Electronics
    Best for swing arm reach

    RAM MOUNTS Fish Finder and Marine Electronics

    9.0/10 our score

    See it on Amazon

Frequently asked questions

What is the best fish finder dash mount?

The best fish finder dash mount depends on your console. The Scotty 0163 suits most 7 to 9 inch screens on a small base.

The PROcise DEK-It single suits flat consoles where you want a fixed plate.

The dual version suits two screens.

Do I need a dash mount or a ball mount?

A dash mount bolts flat to the console and holds a fixed position. A ball mount lets you tilt and rotate the screen.

Choose ball mounts for adjustable viewing and flat plates for a rigid, low profile setup.

Can a dash mount hold a 12 inch screen?

Some can. The OUBULU swing arm holds screens from 5 to 12 inches.

Check the stated screen limit and weight rating before you mount a large display.

Do fish finders really work from a dash mount?

Yes, the mount only holds the display. The transducer does the sound work.

For background, see Do Fish Finders Really Work?

What to Know.