7 Best Transom Mount Transducer Brackets (November 2026)
The best transom mount transducer brackets include the ArcViar XNT Transducer Mount for XNT transducers, the Lowrance 000-13522-001 Mounting Bracket for StructureScan 3D for StructureScan 3D, and the yourour 010-10272-00 Heavy Duty Transducer Mount Bracket for Garmin fitment.
On this page (10 sections)
- Best transom mount transducer brackets for stern mounting
- How the best transom mount transducer bracket picks compare
- How we compared these transom brackets
- What transducer do you run?
- Fixed or portable mounting: which suits your boat?
- How does adjustment affect sonar readings?
- How do you install a transom mount transducer bracket?
- What material should a transom bracket be?
- What are the trade-offs of portable brackets?
- Verdict: which bracket should you buy?
The best transom mount transducer bracket is the one that matches your transducer model and hull, since hole spacing, face shape and beam angle vary by brand. This guide compares seven brackets by fit, material and adjustment, so you can pick the right stern mount without guessing.
A transom mount keeps the transducer at the stern where the water flow is usually clean. That placement helps depth and side imaging stay steady at speed, compared with a hull mount that can sit in disturbed water.
The trade-off is exposure to drag, spray and impact from floating debris.
Our score weighs specs, features and buyer feedback against what you are shopping for. We compared bracket material, listed compatibility, adjustment range and mounting type across all seven picks.
Start with fish finder transducer mounting options if you have not yet chosen between transom, thru hull and trolling motor mounts. That choice matters more than the bracket brand, because each position changes the water flow over the transducer face.
Our picks at a glance
-
1
-
2
Best for StructureScan 3DLowrance 000-13522-001 Mounting Bracket for StructureScan 3D
9.5/10 our score
See it on Amazon -
3
Best for Garmin fitmentyourour 010-10272-00 Heavy Duty Transducer Mount Bracket
9.4/10 our score
See it on Amazon
- 4
Check itBERPSE 000-12603-001 Transom Transducer Mount Bracket
Best for StructureScan HD - 5
Check itWHMYZHL 000-14193-001 Transom Mount Bracket for Lowrance
Best for TripleShot - 6
Check itScully Sully 8001P Universal Portable Transducer Bracket
Best for pontoons - 7
Check itExtreme Max 3006.6878 Portable Transducer Bracket
Best for gunwale mounting
Best transom mount transducer brackets for stern mounting
The top picks split by transducer family. ArcViar covers XNT models, Lowrance and BERPSE cover StructureScan and TotalScan, yourour covers listed Garmin models, and the two portable brackets cover rental, pontoon and move-between-boats use.
ArcViar XNT Transducer Mount: Best for XNT transducers
- Stainless steel construction
- Adjustable detection angle
- Fits listed XNT models including XM 9 MDI T and XNT 14 HW T
- Model 740162-1 for Helix 7 and Si G2N
A metal replacement bracket for XNT transducers, with an adjustable angle for fine tuning after mounting on the transom.
Pros
- Stainless steel build
- Adjustable angle
- Wide listed XNT fit
Cons
- Limited to listed XNT models
- Transducer not included
ArcViar suits Helix 7 owners running a listed XNT transducer who want a metal replacement for a plastic bracket. The stainless steel build resists marine corrosion and holds its shape under drag at speed, which helps keep readings steady on fast runs.
Fit is the main check here. ArcViar lists XM 9 MDI T, XNT 9 20, XNT 9 DI T, XNT 9 HW MSI 150 T, XNT 14 20 T, XNT 14 DI T and several other XNT models.
Match your exact transducer code before you order, since other brands will not use the same hole pattern.
The adjustable detection angle lets you fine tune the face after the bracket is bolted on. That matters because a small tilt changes where the beam points at depth, especially for down imaging and side imaging.
At 0.08 kg, it adds almost no weight to the transom. The trade-off against plastic brackets is cost and the narrow XNT focus.
If your transducer is not on the list, move to the Lowrance or Garmin picks below instead.
Lowrance 000-13522-001 Mounting Bracket for StructureScan 3D: Best for StructureScan 3D
- Plastic replacement bracket
- Fits StructureScan 3D and TotalScan
- Mounts to transom, jackplate or under step
- Part number 000-13522-001
The direct Lowrance bracket for StructureScan 3D and TotalScan transducers, made to bolt to the transom or jackplate.
Pros
- Exact Lowrance fit
- Fits jackplate and step
- Lightweight at 1.28 oz
Cons
- Plastic rather than metal
- Transducers sold separately
Lowrance suits owners of StructureScan 3D or TotalScan transducers who need the direct replacement bracket. This plastic bracket is the factory fit for part number 000-13522-001, so hole spacing and face alignment match the transducer it was made for.
It mounts directly to the transom, on a jackplate or under the step of the hull. That flexibility helps on boats where a flat transom puts the transducer in prop wash or roostertail bubbles at speed.
A jackplate often gives cleaner water.
At 6 x 1 x 2 inches and 1.28 ounces, it is light and low profile. Plastic also flexes slightly on impact, which can protect the transducer face if you strike a log or dock edge at slow speed.
The trade-off is strength. A metal bracket will resist bending better under repeated high speed drag.
Choose this Lowrance bracket for exact fit and light weight, and choose the BERPSE metal version if you want the same transducer family in stainless steel.
yourour 010-10272-00 Heavy Duty Transducer Mount Bracket: Best for Garmin fitment
- Stainless steel, rubber and plastic build
- Adjustable to stay parallel to water
- Replaces 010-10272-00 and K00-00118-01
- Fits listed Garmin Fishfinder, GPSMAP and GSD models
A heavy duty transom bracket for listed Garmin models, with an adjustable design to keep the transducer parallel to the surface.
Pros
- Broad listed Garmin fit
- Corrosion resistant materials
- Adjustable alignment
Cons
- Check your exact Garmin model
- Compact size limits some transducers
yourour suits Garmin owners with a listed Fishfinder, GPSMAP or GSD model who need part 010-10272-00. The adjustable design keeps the transducer parallel to the water surface, which is the single most important alignment for accurate depth readings.
ArcViar and Lowrance buyers should skip this one, since fit is limited to the long Garmin list that includes Fishfinder 160 Blue, GPSMAP 498 Sounder, GPSMAP 720s and GSD 22. Garmin owners should check that list against their exact model code before ordering.
The build mixes stainless steel, rubber and plastic for corrosion and seawater resistance. Yourour states a 30-day money-back guarantee and a 1-year warranty, which gives buyers a clear return path if fit is wrong.
At 2.52 x 1.81 x 1.49 inches and 0.08 kg, it is compact enough for a small transom. The trade-off is size: larger modern transducers may need the bigger Lowrance or BERPSE brackets.
For listed Garmin models, this is the most direct fit in the group.
BERPSE 000-12603-001 Transom Transducer Mount Bracket: Best for StructureScan HD
- Stainless steel with galvanized surface
- Fits StructureScan 3D, HD and TotalScan
- Mounts to transom, jackplate or steps
- Part number 000-12603-001
A metal bracket for StructureScan 3D HD and TotalScan skimmer transducers, with a galvanized finish to resist rust.
Pros
- Metal build
- Fits HD models
- Galvanized finish
Cons
- Heavier than plastic options
- Transducer not included
BERPSE suits StructureScan 3D, HD and TotalScan owners who want metal instead of plastic. The stainless steel build with a galvanized surface resists rust and holds its shape under the drag of a skimmer transducer at speed.
It mounts securely to a transom, on a jackplate or under the steps of the boat. That matches the Lowrance plastic bracket for placement, but with a stiffer frame that resists flex when the transducer catches water at high speed.
Skimmer transducers create more drag than a small puck, so bracket stiffness matters for image quality. A bracket that flexes can blur side imaging and 3D views.
BERPSE lists this bracket for that skimmer role, with part number 000-12603-001.
At 0.37 kg, it is heavier than the plastic Lowrance bracket by more than ten times. That extra weight is only a concern on a very small transom.
The trade-off is worth it for tournament use or frequent high speed runs where image clarity matters most.
WHMYZHL 000-14193-001 Transom Mount Bracket for Lowrance: Best for TripleShot
- Metal build
- Fits TripleShot transducer
- 2-slot design for angle adjustment
- Part number 000-14193-001
A metal transom bracket for the Lowrance TripleShot transducer, with a 2-slot design for quick angle adjustment.
Pros
- Metal strength
- Quick angle adjustment
- Lightweight at 1.6 oz
Cons
- Narrow TripleShot focus
- Check fit before ordering
WHMYZHL suits Lowrance TripleShot owners who need part 000-14193-001. The 2-slot design lets you adjust the angle quickly for alignment, which speeds up the trial runs you need to find the sweet spot at speed.
TripleShot transducers combine sonar, down imaging and side imaging in one housing. That larger face needs a bracket that holds angle under drag, and the metal build provides that strength and stability.
It mounts securely to the back of the boat and resists pressure and shock from the underwater environment. For lake and ocean use, that rigidity helps keep the beam pointed where you set it during a run.
At 1.6 ounces, it stays light despite the metal build. The trade-off is focus: this bracket is made for TripleShot, not for StructureScan or TotalScan.
If you run a different Lowrance transducer, the 000-13522-001 bracket is the safer match.
Scully Sully 8001P Universal Portable Transducer Bracket: Best for pontoons
- Universal portable design
- Tough aluminum construction
- Fits pontoons and thick transoms
- Depth adjustment range listed by mounting type
A portable aluminum bracket that clamps for quick install and removal, with depth adjustment for low and high speed readings.
Pros
- Portable and removable
- Aluminum build
- Fits pontoons
Cons
- Portable fit is less rigid
- Measure transom thickness first
Scully suits pontoon owners and boaters who move a fish finder between vessels. This universal portable bracket installs and removes quickly, so you can store the transducer out of the water between trips and avoid permanent mounting holes.
It fits pontoons with up to 4-1/4 inch platform skirt and thick transom boats up to 3-1/2 inches thick. Scully lists an adjustment range of 18 to 26 inches for pontoon use and 16 to 24 inches for thick transoms, with simple depth adjustment for low and high speed readings.
The tough aluminum construction weighs 2 lb and resists corrosion. Pontoon boats need this kind of flexibility, since many pontoons lack a flat transom that suits a fixed bracket.
The trade-off is rigidity. A portable clamp will move more than a bolted bracket under high speed drag.
Choose Scully for pontoons, rentals and shared boats. Choose a fixed metal bracket for daily use on a fiberglass or aluminum boat where you run fast often.
Extreme Max 3006.6878 Portable Transducer Bracket: Best for gunwale mounting
- Clamps to gunwale, no drilling
- Depth adjustment 15 to 23 in
- Fits gunwales up to 2-3/8 in wide
- Powder coat finish
A portable gunwale bracket with an oversized knob clamp, adjustable depth and a powder coat finish, for trolling speeds.
Pros
- No drilling required
- Wide depth adjustment
- Tool-free clamp
Cons
- Trolling speeds only
- Gunwale width limit
Extreme Max suits kayak, small boat and rental users who want to mount a transducer on the gunwale with no drilling. The oversized knob clamp fits gunwales up to 2-3/8 inches wide and needs no tools to install or remove.
Depth adjusts from 15 to 23 inches from the gunwale, which covers most small hulls and pontoon rails. That range lets you set the face below the waterline without a transom at all.
The powder coat finish resists rust and corrosion. At 3.6 lb and 16.25 x 9 x 2.5 inches, it is heavier than the fixed brackets, but it is meant to be carried on and off the boat.
The key limit is speed. Extreme Max states this bracket is for trolling speeds only, and you should remove it before powering the main engine.
That makes it a poor choice for boats that run fast to reach fishing spots. For slow trolling and portable use, it is the most flexible mount here.
How the best transom mount transducer bracket picks compare
The fixed metal brackets win for daily high speed use, while the portable brackets win for flexibility. Plastic suits exact factory fit, and metal suits stiffness under drag.
| Product | Score | Best for | Material | Mount type |
|---|---|---|---|---|
| ArcViar XNT Transducer Mount | 9.5 | XNT transducers | Stainless steel | Fixed transom |
| Lowrance 000-13522-001 | 9.5 | StructureScan 3D | Plastic | Transom or jackplate |
| yourour 010-10272-00 | 9.4 | Listed Garmin models | Stainless steel mix | Fixed transom |
| BERPSE 000-12603-001 | 9.3 | StructureScan HD | Stainless steel | Transom or jackplate |
| WHMYZHL 000-14193-001 | 8.9 | TripleShot | Metal | Fixed transom |
| Scully 8001P | 8.5 | Pontoons | Aluminum | Portable clamp |
| Extreme Max 3006.6878 | 8.3 | Gunwale mounting | Powder coat metal | Portable clamp |
| Product | Best for | Material | Model | Weight | Our score |
|---|---|---|---|---|---|
| ArcViar XNT Transducer Mount | XNT transducers | Stainless steel | 740162-1 | 0.08 kg | 9.5 |
| Lowrance 000-13522-001 Mounting Bracket for StructureScan 3D | StructureScan 3D | Plastic | 9.5 | ||
| yourour 010-10272-00 Heavy Duty Transducer Mount Bracket | Garmin fitment | 0.08 kg | 9.4 | ||
| BERPSE 000-12603-001 Transom Transducer Mount Bracket | StructureScan HD | Stainless steel | 0.37 kg | 9.3 | |
| WHMYZHL 000-14193-001 Transom Mount Bracket for Lowrance | TripleShot | Metal | 1.6 oz | 8.9 | |
| Scully Sully 8001P Universal Portable Transducer Bracket | pontoons | Aluminum | 8.5 | ||
| Extreme Max 3006.6878 Portable Transducer Bracket | gunwale mounting | 3006.6878 | 3.6 lb | 8.3 |
For a quick decision, match the transducer family first. XNT owners should start with ArcViar.
StructureScan and TotalScan owners should compare Lowrance plastic against BERPSE metal. Garmin owners with a listed model should start with yourour.
Portable users should compare Scully for transoms against Extreme Max for gunwales.
How we compared these transom brackets
We compared listed compatibility, material, mounting type and adjustment range for all seven brackets. Fit came first, because a bracket that does not match your transducer face will not seal or align correctly.
We checked whether each bracket bolts to a flat transom, a jackplate or a step, and whether it clamps for portable use. That split separates the five fixed brackets from the two portable brackets in this guide.
We also weighed stiffness against weight. Metal brackets resist flex under drag, while plastic and portable brackets trade some stiffness for light weight and easy removal.
Scores reflect that trade-off for typical stern use.
Buyer patterns in the data also shaped the order. Brackets with exact factory fit for a named transducer family scored higher than universal brackets, since exact fit reduces return risk and alignment work.
What transducer do you run?
Match the bracket to your transducer model before you compare materials or price. XNT, StructureScan, TotalScan, TripleShot and Garmin transducers use different face shapes and bolt patterns.
Start with our best fish finder transducer mounts for boats overview if you want the wider category view. That guide covers thru hull and trolling motor options alongside transom mounts.
XNT and Helix transducers
Choose ArcViar for listed XNT models such as XNT 9 DI T, XNT 14 HW T and XM 9 MDI T. The stainless build and adjustable angle suit Helix 7 and Si G2N setups.
StructureScan, TotalScan and TripleShot
Choose Lowrance 000-13522-001 for StructureScan 3D and TotalScan in plastic, BERPSE for the same family in metal, and WHMYZHL for TripleShot. Each part number matches one transducer family.
Garmin transducers
Choose yourour 010-10272-00 for listed Garmin Fishfinder, GPSMAP and GSD models. Our best garmin fish finder transducer mount guide covers Garmin fit in more detail.
Fixed or portable mounting: which suits your boat?
Fixed brackets bolt to the transom and hold angle at speed. Portable brackets clamp on and remove without drilling, but they suit slower speeds.
When a fixed bracket is better
Pick fixed metal for daily use, tournament fishing and fast runs to fishing spots. The bolted connection resists flex and keeps side imaging sharp at speed.
When a portable bracket is better
Pick portable for rentals, shared boats, pontoons and gunwale mounting. Scully fits thick transoms and pontoon skirts, while Extreme Max fits gunwales up to 2-3/8 inches wide.
How does adjustment affect sonar readings?
Angle and depth settings change where the beam points and how clean the water flow is over the face. A face that runs parallel to the water surface gives the most accurate depth readings.
ArcViar offers an adjustable detection angle for fine tuning. WHMYZHL uses a 2-slot design for quick angle changes. yourour lists an adjustable design to keep the transducer parallel to the surface.
For beam coverage questions, see What Is a Wide Beam Transducer Used For?. A wide beam covers more area, but it needs a stable mount to avoid gaps at the edges.
How do you install a transom mount transducer bracket?
Bolt the bracket level, set the depth so the face stays submerged at speed, then adjust the angle on a test run. Start with fish finder transducer mounting for the full step by step process, including cable routing and sealant checks.
Position on the hull
Place the bracket on a flat section of the transom, clear of strakes, rivets and prop wash. On a jackplate, center the transducer and check that the cable has slack for tilt.
Angle and depth checks
Run the boat at cruise speed and watch for bubbles or dropouts on the screen. Small angle changes often fix high speed dropouts without changing depth at all.
What material should a transom bracket be?
Plastic brackets are light and forgiving on impact. Metal brackets hold angle better under drag and resist bending.
Plastic vs metal
Lowrance uses plastic for exact fit at 1.28 ounces. ArcViar, BERPSE and WHMYZHL use metal for stiffness.
Scully uses aluminum for portable strength at 2 lb.
Corrosion and care
Rinse metal brackets with fresh water after saltwater use and check bolts for rust each season. Tighten mounting bolts before spring, since vibration can loosen hardware over a season of runs.
What are the trade-offs of portable brackets?
Portable brackets remove the need for drilling and let you store the transducer dry between trips. That convenience comes with speed and stability limits.
Extreme Max limits its gunwale bracket to trolling speeds and asks you to remove it before powering the main engine. Scully allows depth adjustment for low and high speed readings, but a clamp will still flex more than bolts.
For daily use, a fixed bracket is the safer long term choice. For occasional use, portable brackets save you from drilling holes in a boat you do not own or a hull with no flat transom.
Verdict: which bracket should you buy?
Buy the ArcViar XNT Transducer Mount if you run a listed XNT transducer, since its stainless build and adjustable angle suit fast stern use. Buy the Lowrance 000-13522-001 if you run StructureScan 3D or TotalScan and want the exact factory fit in plastic.
Buy the yourour 010-10272-00 if you run a listed Garmin model, since its adjustable alignment keeps the face parallel to the water. Buy BERPSE if you want that Lowrance family in metal for stiffer high speed imaging.
Buy WHMYZHL for TripleShot, and buy Scully or Extreme Max for portable pontoon or gunwale use.
Match the part number to your transducer, confirm your transom thickness and hull shape, then set depth and angle on a test run. That order prevents the most common return, which is a bracket that fits the boat but not the transducer face.
Our top 3 picks at a glance
-
1
-
2
Best for StructureScan 3DLowrance 000-13522-001 Mounting Bracket for StructureScan 3D
9.5/10 our score
See it on Amazon -
3
Best for Garmin fitmentyourour 010-10272-00 Heavy Duty Transducer Mount Bracket
9.4/10 our score
See it on Amazon
Frequently asked questions
What is the best transom mount transducer bracket?
The best choice depends on your transducer brand and model. ArcViar suits listed XNT transducers, Lowrance suits StructureScan 3D and TotalScan, and yourour suits listed Garmin models.
Match the bracket to the transducer first, then check material and adjustment.
Can a transom bracket mount to a jackplate?
Yes. The Lowrance 000-13522-001 and BERPSE 000-12603-001 both list jackplate mounting.
Confirm the hole pattern and transducer shape fit your jackplate before drilling.
A jackplate can place the transducer in cleaner water than a flat transom in some hull designs.
Do I need a portable bracket or a fixed bracket?
Choose a fixed bracket for daily use and high speed stability. Choose a portable bracket if you move the fish finder between boats or want no drilling.
The Scully and Extreme Max suit portable use, while the fixed metal brackets suit permanent stern mounting.
How deep should a transom mount transducer sit?
Set it so the face stays in the water at speed without creating drag or bubbles. Start with the maker guidance for your transducer, then adjust the angle so the face runs parallel to the water surface.
Small changes in depth or angle can change high speed readings.
About this guide: Our look at transom mount transducer brackets draws on maker specs, materials and what owners report. See how we research.



