5 Best Lowrance Fish Finder Mounting Brackets (November 2026)
The best Lowrance fish finder mounting brackets include the FPN Universal Mounting Bracket for adjustable display angles, the Lowrance 000-13522-001 Mounting Bracket for StructureScan 3D for transducer transom mounts, and the Lowrance 000-10027-001 Bracket for Mark-5 and Elite-5 units.
On this page (10 sections)
- Our top picks for Lowrance fish finder mounting brackets
- How the best Lowrance fish finder mounting brackets compare
- How we compared these brackets
- Which Lowrance bracket fits my display model?
- Should I pick a ball arm, a gimbal or a quick release bracket?
- What material and strength should I look for?
- How do I install a Lowrance fish finder bracket safely?
- When do I need a transducer bracket instead of a display bracket?
- How do I choose between a universal bracket and a model-specific bracket?
- Which bracket is the best buy for a stable Lowrance install?
The best Lowrance fish finder mounting brackets for most boats is the FPN Universal Mounting Bracket, because its 1.5-inch ball-and-socket design lets you set viewing angle and position in one mount.
If you need a transducer bracket, a model-specific gimbal or a small-unit quick release, the right pick changes fast.
This guide compares five brackets that solve different jobs.
One is a universal display arm. One holds a transducer on the transom.
One fits older Mark-5 and Elite-5 units. One is a quick release for 4 and 5 inch displays.
One replaces a gimbal on HDS-7 models.
Start with the job, not the brand name. A display install needs a different part than a transom mount for a StructureScan transducer.
If you want a broader setup view before you choose, our Do Fish Finders Really Work? What to Know guide explains what the display does once it is mounted.
Our picks at a glance
-
1
-
2
Best for transducer transom mountsLowrance 000-13522-001 Mounting Bracket for StructureScan 3D
9.5/10 our score
See it on Amazon -
3
- 4
Check itTUSITA 000-14170-001 Quick Release Bracket Compatible
Best for small 4 and 5 inch units - 5
Check itBzumperyz 000-11019-001 Upgrade Gimbal Bracket Mounting Bracket
Best for HDS-7 gimbal replacement
Our top picks for Lowrance fish finder mounting brackets
The FPN mount is the top pick for display installs because it covers more Lowrance models and gives 360 degree rotation.
The Lowrance 000-13522-001 wins only for transducer work. The other three picks win on model-specific fit.
FPN Universal Mounting Bracket: Best for adjustable display angles
- 1.5-inch ball head base
- Extended aluminum alloy arm
- Spherical and rectangular plates
- Mounting hole spacing 2.8 to 5.5 inches
A universal ball-and-socket mount that fits many Lowrance HDS LIVE, Carbon and PRO models and lets you rotate the display to the angle you need.
Pros
- 360 degree rotation
- Fits hole spacing from 2.8 to 5.5 inches
- Works on boats, kayaks and ATVs
Cons
- Needs a flat surface for the circular base
- Check your display hole spacing before drilling
The FPN Universal Mounting Bracket suits boat owners who want one mount for a Lowrance HDS LIVE, Carbon or PRO display at the helm.
Its extended aluminum alloy arm and 1.5-inch ball head give you room to move the screen closer or farther from the base.
The package includes a 1.5-inch diameter ball head base, a metal arm and a universal rectangular mounting plate.
The plate fits mounting hole spacing from 2.8 to 5.5 inches.
That range covers many fit patterns, but you still need to match your display's holes before you drill.
The circular base has a universal AMPS hole pattern and can mount on a boat, kayak, ATV or other flat surface.
The double socket arm uses RAM size C 1.5-inch ball parts.
FPN says the ball-and-socket design allows 360 degree rotation and infinite positioning.
In daily use, that means you can tilt the screen down for a seated view or turn it toward a passenger for a quick check.
You can also take the display off in minutes if you store it inside at night.
The trade-off is that a ball arm needs a flat, solid base.
It is not made for a curved console panel.
Choose this mount if you want angle freedom and broad Lowrance fit.
Skip it if your unit needs an exact factory gimbal or if your console has no flat spot for the base.
Lowrance 000-13522-001 Mounting Bracket for StructureScan 3D: Best for transducer transom mounts
- For StructureScan 3D and TotalScan transducers
- Transom mount design
- Plastic construction
- Bracket and fitting kit included
A Lowrance transom bracket made for StructureScan 3D and TotalScan transducers, not for holding a display at the helm.
Pros
- Made for StructureScan 3D and TotalScan
- Fits transom, jackplate or under step
- Lightweight at 1.28 ounces
Cons
- Transducers sold separately
- Not a display mount
The Lowrance 000-13522-001 suits owners who need to mount a StructureScan 3D or TotalScan transducer to the transom.
It is a transom mount transducer bracket, not a display bracket for the helm.
Lowrance lists it as a plastic replacement bracket for StructureScan 3D and TotalScan transducers.
The design lets the transducer mount direct to the transom, on the jackplate or under the step.
The package includes the bracket, a fitting kit and a document.
It weighs 1.28 ounces and measures 6 x 1 x 2 inches.
That light weight makes it simple to handle during a transom install.
Plastic construction keeps it light, but you should not expect the same stiffness as a steel gimbal.
Transducers are sold separately.
That point matters if you are shopping for a full setup.
This bracket only does the mounting job for a transducer you already own or plan to buy.
Choose this bracket if your job is transducer placement on the transom.
Skip it entirely if you need to hold a fish finder screen.
For display work, look at the FPN arm, the TUSITA quick release or the Bzumperyz gimbal instead.
Lowrance 000-10027-001 Bracket: Best for Mark-5 and Elite-5 units
- For Mark-5 and Elite-5 models
- Part number 3005.7045
- Black finish
- Wall mount type
A Lowrance bracket made for Mark-5 and Elite-5 units, for owners who need the matching QRB-5 style mount for those models.
Pros
- Made for Mark-5 and Elite-5
- Lightweight at 2.8 ounces
- Polished finish
Cons
- Fit is limited to Mark-5 and Elite-5
- Not a universal display arm
The Lowrance 000-10027-001 suits owners of Mark-5 and Elite-5 units who need the matching bracket for those models.
It is made for that fit, so model match matters more than universal range here.
Lowrance lists the part as the 000-10027-001 bracket, also shown as part number 3005.7045.
The included component is described for Mark-5 and Elite-5 models.
The finish is polished, and the color is black.
It weighs 2.8 ounces, so it is light to handle during a swap.
The item dimensions are 3 x 8 x 10 inches.
Package dimensions are 8.25 x 13.25 x 3 inches, with a package weight of 0.23 pounds.
In daily use, this type of bracket is for owners who already know the fit.
You are not buying angle freedom or a long arm.
You are buying the correct mount for an older unit.
That narrow focus is both its strength and its limit.
Choose it if your display is a Mark-5 or Elite-5 and you need this part number.
Skip it if you own an HDS, HOOK or Eagle model, since those units use different mounts.
For those newer models, the FPN arm or TUSITA bracket will fit the job better.
TUSITA 000-14170-001 Quick Release Bracket Compatible: Best for small 4 and 5 inch units
- Quick release design
- Tilt and swivel adjustment
- High strength composite
- Mounting hardware included
A compatible quick release bracket for Lowrance HOOK2 4 and 5, HOOK Reveal 5, Eagle 4x and 5, and Simrad Cruise 5.
Pros
- Quick release for small units
- Tilt and swivel
- Hardware included
Cons
- Made for 4 and 5 inch models
- Compatible part, not a Lowrance part
The TUSITA 000-14170-001 suits owners of small Lowrance units who want a quick release mount.
It is compatible with the Lowrance 000-14170-001 part and fits 4 and 5 inch displays.
Compatible devices include the Lowrance HOOK2 4 and 5, HOOK Reveal 5, Eagle 4x and 5, and Simrad Cruise 5.
That list is specific, so check your exact model before you order.
It is not a fit for 7, 9 or 12 inch HDS displays.
The mount offers tilt and swivel adjustment.
TUSITA says the design is from high strength composite material and weighs 101 g.
The package includes one quick release bracket and mounting hardware.
In daily use, quick release helps if you move the unit between a console and a seat mount or store it off the boat.
Tilt and swivel help you find a clear view from the helm seat.
The seat mount type means you should plan the mounting spot around where you sit.
Choose this bracket for a small 4 or 5 inch Lowrance or Simrad unit.
Skip it for larger screens.
For a larger HDS display, the FPN universal arm gives you a wider fit range and more reach.
Bzumperyz 000-11019-001 Upgrade Gimbal Bracket Mounting Bracket: Best for HDS-7 gimbal replacement
- For HDS-7 Gen2 Touch, Gen3 and Carbon
- Also fits HOOK-7 and Elite-7 HDI CHIRP
- Steel with black powder coating
- Ratchet teeth for angle grip
An upgrade gimbal bracket with knobs for HDS-7 Touchscreen models, built to hold the display at a set angle.
Pros
- Ratchet teeth help hold angle
- Steel construction
- Not for Elite-7 Ti or Elite FS7
Cons
- Made for specific 7 inch models
- Not water resistant
The Bzumperyz 000-11019-001 suits owners who need a gimbal bracket with knobs for HDS-7 Touchscreen models.
It is made for HDS-7 Gen2 Touch, HDS-7 Gen3, HDS-7 Carbon and HOOK-7.
The bracket also lists compatibility with Elite-7 HDI CHIRP.
It is not for use with Elite-7 Ti or Elite FS7.
That exclusion matters, so check your model name with care before you buy.
The design uses ratchet teeth in the bracket and display case to help hold the chosen angle.
Bzumperyz says the steel, black powder coated build helps resist corrosion and rust.
The item weighs 0.31 kg and measures 8.5 x 4.33 x 2.72 inches.
In daily use, a gimbal with knobs holds the display in a set tilt for dashboard or tabletop use.
That is different from a ball arm that you can swing to any angle.
If you like a fixed, firm tilt, a gimbal can feel more stable at speed.
If you want to turn the screen toward a passenger, a ball arm is more flexible.
Choose this bracket if your HDS-7 or HOOK-7 needs a replacement gimbal.
Skip it if you want a universal arm or if your model is Elite-7 Ti or Elite FS7.
How the best Lowrance fish finder mounting brackets compare
The FPN mount wins for display angle and range, while the Lowrance 000-13522-001 wins only for transducer work.
Use the table below to match the part to the job before you read the buying advice.
| Product | Best for | Material | Length | Mounting type | Our score |
|---|---|---|---|---|---|
| FPN Universal Mounting Bracket | adjustable display angles | Aluminum | 11.4 inches | Drill Mount | 9.6 |
| Lowrance 000-13522-001 Mounting Bracket for StructureScan 3D | transducer transom mounts | Plastic | 9.5 | ||
| Lowrance 000-10027-001 Bracket | Mark-5 and Elite-5 units | Wall Mount | 9.3 | ||
| TUSITA 000-14170-001 Quick Release Bracket Compatible | small 4 and 5 inch units | High strength composite | Seat Mount | 9.1 | |
| Bzumperyz 000-11019-001 Upgrade Gimbal Bracket Mounting Bracket | HDS-7 gimbal replacement | Alloy Steel | Dashboard or Tabletop | 8.8 |
How we compared these brackets
We compared specs, fit lists and materials, and weighed buyer feedback against what you are shopping for.
The FPN arm lists HDS LIVE, Carbon and PRO in 7, 9 and 12 inch sizes, plus Elite FS and Eagle series.
The TUSITA bracket lists HOOK2 4 and 5, HOOK Reveal 5, Eagle 4x and 5, and Simrad Cruise 5.
The Bzumperyz gimbal lists HDS-7 Gen2 Touch, Gen3, Carbon, HOOK-7 and Elite-7 HDI CHIRP.
Material also set the scores. The FPN arm is aluminum alloy, the transducer bracket is plastic at 1.28 ounces, the TUSITA bracket is composite at 101 g, and the Bzumperyz gimbal is alloy steel at 0.31 kg.
We also checked limits. The transducer bracket does not hold a display, the TUSITA bracket does not fit large HDS screens, and the Bzumperyz gimbal is not for Elite-7 Ti or Elite FS7.
Which Lowrance bracket fits my display model?
Match the fit list first. A universal arm covers more models, while a model-specific bracket fits one job with care.
HDS LIVE, Carbon and PRO displays
For HDS LIVE, Carbon and PRO in 7, 9 and 12 inch sizes, the FPN mount lists fit. Its plate fits hole spacing from 2.8 to 5.5 inches, making it the widest choice here for newer HDS units.
HDS-7 Touchscreen models
For HDS-7 Gen2 Touch, Gen3 and Carbon, the Bzumperyz bracket is made for that fit. It also fits HOOK-7 and Elite-7 HDI CHIRP, but not Elite-7 Ti or Elite FS7.
HOOK2, HOOK Reveal and Eagle small units
For HOOK2 4 and 5, HOOK Reveal 5, Eagle 4x and 5, and Simrad Cruise 5, the TUSITA quick release lists fit. Those are 4 and 5 inch units, so a larger HDS screen needs a different mount.
Mark-5 and Elite-5 units
For Mark-5 and Elite-5, the Lowrance 000-10027-001 is made for those models. Do not use it for newer HDS or HOOK models.
Should I pick a ball arm, a gimbal or a quick release bracket?
Pick a ball arm for angle freedom, a gimbal for a fixed tilt and a quick release for easy removal.
Ball arm for flexible viewing
A ball arm like the FPN mount lets you rotate the display 360 degrees and set it high or low. That helps if you share the screen or angle it away from glare.
Gimbal for a fixed tilt
A gimbal like the Bzumperyz bracket holds the display at a chosen tilt with knobs. Ratchet teeth help keep that angle, which suits a dash or tabletop spot where you sit in one place.
Quick release for storage and moving
A quick release bracket like the TUSITA mount helps if you remove the unit often. You can lift it off and store it inside, then use tilt and swivel to reset the view.
What material and strength should I look for?
Aluminum, steel, plastic and composite all appear in this group, and each has a trade-off for daily use.
Aluminum alloy arms
The FPN arm uses an extended aluminum alloy arm with a 1.5-inch ball. Aluminum keeps the arm light while it reaches out from the base to place the screen at eye level.
Steel gimbals
The Bzumperyz gimbal is alloy steel with black powder coating at 0.31 kg. Steel gives a firm hold for a 7 inch display, and Bzumperyz says the coating helps resist corrosion and rust.
Plastic and composite mounts
The Lowrance transducer bracket is plastic at 1.28 ounces, which is light for a transom mount but not for holding a heavy display. The TUSITA bracket is high strength composite at 101 g, which keeps a small-unit seat mount light and easy to move.
How do I install a Lowrance fish finder bracket safely?
Safe install starts with a flat, solid spot and a clear view line. Plan the spot before you drill any holes.
Pick the spot and check the base
Sit in your helm seat and hold the display at eye level. Note where sun hits the screen and choose a spot in reach but out of direct glare.
The FPN base needs a flat surface and uses a universal AMPS hole pattern. The TUSITA bracket uses a seat mount, while the Bzumperyz gimbal fits dashboard or tabletop use, so match base type to your boat first.
Set the angle and secure loose parts
With a ball arm, set the tilt then tighten the socket. With a gimbal, set the tilt and use the knobs to lock it.
Tighten knobs and socket nuts after each move, since loose hardware lets the screen shift in chop.
When do I need a transducer bracket instead of a display bracket?
You need a transducer bracket when the part holds a transducer, not a screen.
The Lowrance 000-13522-001 is the only transducer bracket in this group. It fits StructureScan 3D and TotalScan transducers and can mount to the transom, on the jackplate or under the step.
Transducers are sold separately, so plan for that cost.
A display bracket holds the fish finder at the helm. The FPN arm, TUSITA quick release and Bzumperyz gimbal do that job, and they do not mount a transducer to the hull.
If you are new to sonar setup, our How Does a Castable Fish Finder Work? What to Know guide explains a different type of fish finder.
How do I choose between a universal bracket and a model-specific bracket?
Choose a universal bracket for range and a model-specific bracket for exact fit. The trade-off is flexibility versus precision.
A universal bracket like the FPN arm fits many Lowrance models, plus GPS plotters, depth sounders and CB radios per FPN. That range helps if you change displays later.
A model-specific bracket like the Bzumperyz gimbal fits HDS-7 models with care. It holds a set tilt with knobs and ratchet teeth, which helps if you want the same view every trip.
For flat panel installs, our Best Fish Finder Mounting Plates guide covers a related option. A plate can spread the load on a dash where a ball base would not sit flat.
Check hole spacing before you buy any universal part. The FPN plate fits 2.8 to 5.5 inches, and if your display falls outside that range, a model-specific part may be safer.
Which bracket is the best buy for a stable Lowrance install?
The best buy for most stable Lowrance installs is the FPN Universal Mounting Bracket. It gives you angle control, reach and broad fit in one part.
Choose the Lowrance 000-13522-001 only for a StructureScan 3D or TotalScan transducer on the transom.
Choose the Lowrance 000-10027-001 only for Mark-5 and Elite-5 units. Choose the TUSITA bracket only for 4 and 5 inch HOOK or Eagle units.
Choose the Bzumperyz gimbal only for HDS-7, HOOK-7 or Elite-7 HDI CHIRP.
If your model is not on a fit list, do not force it. Measure hole spacing, check screen size and compare base type.
For the best Lowrance fish finder mounting brackets, match the part to the model first, then to the angle you need.
Our top 3 picks at a glance
-
1
-
2
Best for transducer transom mountsLowrance 000-13522-001 Mounting Bracket for StructureScan 3D
9.5/10 our score
See it on Amazon -
3
Frequently asked questions
What is the best Lowrance fish finder mounting bracket for a display?
For most helm installs, a ball-and-socket mount like the FPN Universal Mounting Bracket gives you the widest choice for angle and position. It fits many Lowrance HDS models.
If you need a gimbal for an HDS-7, the Bzumperyz bracket matches that job instead.
Can I use a transducer bracket to hold my display?
No. The Lowrance 000-13522-001 is a transom bracket for StructureScan 3D and TotalScan transducers.
It does not hold a fish finder display at the helm.
Use a display bracket or gimbal for the screen, and a transducer bracket for the transducer.
How do I know if a bracket fits my Lowrance model?
Check the model list for the bracket first. The TUSITA quick release fits HOOK2 4 and 5, HOOK Reveal 5, Eagle 4x and 5, and Simrad Cruise 5.
The Bzumperyz gimbal fits HDS-7 Gen2 Touch, Gen3, Carbon, HOOK-7 and Elite-7 HDI CHIRP.
The FPN mount lists HDS LIVE, Carbon and PRO in 7, 9 and 12 inch sizes.
What should I check before drilling for a mount?
Check hole spacing, surface flatness and your eye line from the helm seat. Sit where you fish and note where glare hits the screen.
Many buyers angle the display slightly down and toward the driver.
Test the position with the mount loose before you tighten it down.
About this guide: Our look at Lowrance fish finder mounting brackets draws on maker specs, materials and what owners report. See how we research.



