Best picks

8 Best Fishing Rod Holders for Truck Beds (November 2026)

Updated on · By the Fish Finder Critic team

The best truck bed fishing rod holders include the Fishing Rod Holder for Truck Tailgate for tailgate carry, the VEYWANE Fishing Rod Racks for Boat/Wall/Truck Bed for flexible mounting, and the JOYTUTUS Truck Bed Fishing Rod Holder for 6 rods on a clamp.

On this page (8 sections)
  1. Best truck bed fishing rod holders, ranked by score
  2. How do tailgate, clamp-on and cross-bed rod holders compare?
  3. How we compared these truck bed rod holders
  4. Which truck bed rod holder fits your bed?
  5. How many rods should your truck bed holder carry?
  6. Can you use a truck bed rod holder on a boat or at home?
  7. How do you install and care for a truck bed rod holder?
  8. Verdict: which fishing rod holder for a truck bed should you buy?

The best fishing rod holder truck bed choice for most pickups is a tailgate rack that holds 4 rods upright, because it keeps rods separated and leaves the bed open for coolers and gear. Our score weighs specs, features and buyer feedback against what you're shopping for.

We compared 8 truck bed rod holders by capacity, mounting type, clamp size, materials and how each one secures rods on rough roads. Capacity ranges from 4 to 6 rods, and mounting ranges from tailgate straps to C-clamps to a ratcheting cross-bed bar.

Our picks at a glance

  1. 1 Fishing Rod Holder for Truck Tailgate
    Best for tailgate carry

    Fishing Rod Holder for Truck Tailgate

    9.7/10 our score

    See it on Amazon
  2. 2 VEYWANE Fishing Rod Racks for Boat/Wall/Truck Bed
    Best for flexible mounting

    VEYWANE Fishing Rod Racks for Boat/Wall/Truck Bed

    9.6/10 our score

    See it on Amazon
  3. 3 JOYTUTUS Truck Bed Fishing Rod Holder
    Best for 6 rods on a clamp

    JOYTUTUS Truck Bed Fishing Rod Holder

    9.4/10 our score

    See it on Amazon
  1. 4Brocraft 4 Rod Truck Bed Rod Holder

    Brocraft 4 Rod Truck Bed Rod Holder

    Best for truck, boat and canoe
    Check it
  2. 5Portarod Inshore Rod Holder for Truck BedCheck it
  3. 6Portarod Inshore Rod Holder for Truck BedCheck it
  4. 7SPIRRELAB Aluminum Fishing Rod Holder for TruckCheck it
  5. 8GADFISH Fishing Rod Holder for Truck Bed

    GADFISH Fishing Rod Holder for Truck Bed

    Best for adjustable 6-rod storage
    Check it

Best truck bed fishing rod holders, ranked by score

The top pick suits the most common trip: a few rods, a stock tailgate, and a bed you still want for other gear. The rest of the list trades capacity, mount style and bed fit against each other.

1

Fishing Rod Holder for Truck Tailgate: Best for tailgate carry

Fishing Rod Holder for Truck Tailgate, truck bed fishing rod holders
9.7/10Our score
  • 4-rod capacity
  • Soft foam inserts
  • Adjustable hook and loop straps
  • Tailgate mount, no drilling

A tailgate rack that holds 4 rods upright with foam inserts and adjustable straps, leaving the truck bed open for coolers and gear.

See it on Amazon

Pros

  • Frees truck bed space
  • Soft foam protects blanks and guides
  • Tool-free strap setup

Cons

  • Limited to 4 rods
  • Needs a usable tailgate cap fit

This tailgate rack suits drivers who want rods off the bed floor without giving up bed space. It holds 4 rods upright with soft foam inserts that separate blanks and guides so they do not collide on bumpy roads.

The mount is the key difference from clamp-on racks. Straps wrap the tailgate, the rack sits on the tailgate cap, and you close the tailgate to lock the fit.

That setup needs no drilling and installs in minutes, and it works on most truck tailgates.

Foam inserts and adjustable hook and loop straps give a snug fit for different rod diameters. The build is plastic with weather-resistant materials, and it weighs 10.88 ounces, so it is easy to remove and store in a garage.

The trade-off is capacity and position. Four rods is enough for most trips, but a 6-rod set needs a different rack.

The tailgate position also puts rods at the rear, so check your local rules and rear visibility before a long haul.

Fishing Rod Holder for Truck TailgateCheck it on Amazon
2

VEYWANE Fishing Rod Racks for Boat/Wall/Truck Bed: Best for flexible mounting

VEYWANE Fishing Rod Racks for Boat/Wall/Truck Bed, truck bed fishing rod holders
9.6/10Our score
  • 3-pole racks, 2 packs
  • Rubber band clips
  • ABS plastic
  • Wall, boat or truck bed mount

Lightweight ABS racks with rubber band clips that hold 3 poles each and can mount on a wall, boat deck or truck bed.

See it on Amazon

Pros

  • Lightweight ABS plastic
  • Rubber clips hold on bumpy roads
  • Two packs for more spacing

Cons

  • Fewer rods per rack than 6-rod options
  • Mounting surface must suit a wall-style rack

VEYWANE suits anglers who want a light rack that can move between a truck bed, a boat deck and a wall. Each rack holds 3 poles, and the set includes 2 packs, so you can split them across two spots or mount them in a row.

The clips use rubber bands rather than stiff foam. That design holds rods firmly on rough roads or rough water, and it lets you slide a rod in or out without fighting a tight foam slot.

The racks are ABS plastic and lightweight.

Mounting is horizontal on a wall, boat deck or truck bed. That flexibility is the main appeal, since one set can serve a garage wall at home and a truck bed on a trip.

The racks measure 2.4 by 5.6 by 7.7 inches, so check that your bed rail or deck has a flat spot.

The trade-off is a smaller per-rack count and a wall-style mount. If you need 6 rods in one rack on a truck rail, the JOYTUTUS or GADFISH fits that job more directly.

VEYWANE Fishing Rod Racks for Boat/Wall/Truck BedCheck it on Amazon
3

JOYTUTUS Truck Bed Fishing Rod Holder: Best for 6 rods on a clamp

JOYTUTUS Truck Bed Fishing Rod Holder, truck bed fishing rod holders
9.4/10Our score
  • 6-rod capacity
  • Heavy-duty metal
  • Adjustable straps
  • C-clamp fits up to 1.6 in

A metal clamp-on rack that holds 6 rods with adjustable straps, mounts vertically or horizontally, and fits most truck beds up to 1.6 in thick.

See it on Amazon

Pros

  • 6-rod capacity
  • Metal build with drainage holes
  • Vertical or horizontal mounting

Cons

  • Not for slide rails or cargo covers
  • Heavier at 2 kg

JOYTUTUS suits drivers who carry a full set of 6 rods and want them clamped to the bed rail. The rack is heavy-duty metal with drainage holes that prevent water buildup, and adjustable straps keep rods from tangling on bumpy rides.

The C-clamp fits most truck beds up to 1.6 inches thick, plus boat rails. You can mount it vertically or horizontally on the bed rail, which changes how rods angle toward the cab or out the back.

JOYTUTUS lists fit for factory beds such as the F-150, Silverado, RAM and Tacoma.

The catch is compatibility. JOYTUTUS says it is not compatible with slide rails or cargo covers.

If your truck has a sliding bed system or a cover over the rail, check the clamp surface before you order.

At 2 kg, it is heavier than plastic racks, but the metal build and 1-year warranty from JOYTUTUS support regular use. Weigh the 6-rod capacity against the added weight and rail limits.

JOYTUTUS Truck Bed Fishing Rod HolderCheck it on Amazon
4

Brocraft 4 Rod Truck Bed Rod Holder: Best for truck, boat and canoe

Brocraft 4 Rod Truck Bed Rod Holder, truck bed fishing rod holders
9.2/10Our score
  • 4-rod storage
  • Aluminum C-clamp to 2.5 in
  • 6061-T6 aluminum track
  • Bungee cord retention

An aluminum C-clamp rack that opens to 2.5 in, holds 4 rods and reels with bungee cords, and moves between trucks, boats, canoes and pontoons.

See it on Amazon

Pros

  • Wide 2.5 in clamp opening
  • Aluminum and nylon build
  • Repositionable clamp-on design

Cons

  • 4-rod limit
  • Needs a suitable clamp surface

Brocraft suits anglers who use one rack across a truck, boat, canoe and pontoon. It holds 4 rods and reels in one organized rack, and the aluminum C-clamp opens to 2.5 inches, the widest opening in this group.

The track is 6061-T6 aluminum with fiberglass-injected nylon parts. Bungee cords hold rods in place during transport, then release quickly at the water.

The clamp-on design means no permanent install, so you can reposition or remove the rack when the job changes.

That wider clamp matters if your bed edge or gunwale is thicker than 1.6 inches. Measure the lip you plan to clamp before you choose between this and the JOYTUTUS, since each clamp has a different limit.

The trade-off is the 4-rod limit and the need for a suitable clamp surface. A smooth, angled or padded edge may not give the clamp a solid bite, so test the fit on a parked truck first.

Brocraft 4 Rod Truck Bed Rod HolderCheck it on Amazon
5

Portarod Inshore Rod Holder for Truck Bed: Best for cross-bed fit

Portarod Inshore Rod Holder for Truck Bed, truck bed fishing rod holders
9.0/10Our score
  • 5 rod holders
  • Ratcheting bar 53 to 84 in
  • Adjustable rod angle and spacing
  • Mill finish aluminum

A ratcheting cross-bed system with 5 rod holders that expands from 53 to 84 in, with adjustable angle and spacing and no drilling.

See it on Amazon

Pros

  • Fits almost any truck bed width
  • Adjustable angle and spacing
  • Fully removable, no drilling

Cons

  • 5-rod limit in this version
  • Bar must ratchet against side walls

Portarod Inshore suits drivers who want rods held across the bed against the cab wall. The ratcheting support bar expands from 53 to 84 inches, so it fits almost any year, make or model of truck without drilling or bolts.

This version includes 5 rod holders. You can adjust the vertical angle of the rods and the space between holders, which helps with different rod lengths and reel sizes.

The ratchet action locks the bar against the side walls in seconds and removes just as fast.

The body is mill finish aluminum with stainless screws and galvanized parts, and it weighs 9 pounds. Portarod says the system fits below folding tonneau covers, and locks are available if you want extra security.

The trade-off is that the bar needs side walls to ratchet against. A bed with a liner, a slide system or a shape that blocks the bar path needs a check before you order.

Storage is compact, but the bar still needs room in the garage.

Portarod Inshore Rod Holder for Truck BedCheck it on Amazon
6

Portarod Inshore Rod Holder for Truck Bed: Best for 4 rods cross-bed

Portarod Inshore Rod Holder for Truck Bed, truck bed fishing rod holders
8.7/10Our score
  • 4 rod holders
  • Ratcheting bar 53 to 84 in
  • Adjustable rod angle and spacing
  • Mill finish aluminum

The 4-holder version of the Portarod Inshore cross-bed system, with a 53 to 84 in ratcheting bar and adjustable angle and spacing.

See it on Amazon

Pros

  • Fits almost any truck bed width
  • Adjustable angle and spacing
  • Fully removable, no drilling

Cons

  • More compact 4-holder setup
  • Bar must ratchet against side walls

This Portarod Inshore version suits drivers who carry 4 rods and want the same cross-bed system as the 5-holder model. The ratcheting bar still expands from 53 to 84 inches and fits almost any truck bed without drilling.

You can adjust the rod angle and the spacing between the 4 holders. That spacing control helps when reels are bulky or when one rod is much longer than the others.

The ratchet locks the bar against the side walls, and the whole system removes in seconds for garage storage.

The build is mill finish aluminum with stainless screws and galvanized components, and it weighs 9 pounds. Portarod says it fits below folding tonneau covers, and additional holders or locks can be added if you want to expand it later.

The trade-off against the 5-holder version is capacity, not fit. If you regularly carry a fifth rod, the 5-holder Portarod saves a separate purchase.

If 4 rods cover your trips, this version keeps the rack simpler.

Portarod Inshore Rod Holder for Truck BedCheck it on Amazon
7

SPIRRELAB Aluminum Fishing Rod Holder for Truck: Best for foam-lined 4-rod carry

SPIRRELAB Aluminum Fishing Rod Holder for Truck, truck bed fishing rod holders
8.5/10Our score
  • 4 rods
  • 1.5 in aluminum C-clamps
  • Custom EVA foam
  • Bungee cords
  • Horizontal or vertical mount

An aluminum clamp-on rack with 1.5 in C-clamps, EVA foam inserts and bungee cords that holds 4 rods and mounts horizontally or vertically.

See it on Amazon

Pros

  • EVA foam for a snug fit
  • Scratch-proof rubber pads on clamps
  • 5-minute install claim from SPIRRELAB

Cons

  • Not for bed slides, bed covers or camper tops
  • 1.5 in clamp limit

SPIRRELAB suits drivers who want a foam-lined rack that clamps to the bed rail. It holds 4 rods with custom EVA foam inserts and bungee cords for extra hold on bumpy roads.

The frame is aluminum with weather-resistant ABS plastic parts.

The mount uses 1.5 inch aluminum C-clamps with rubber pads that protect the truck bed finish. It can mount horizontally or vertically, and SPIRRELAB says install takes about 5 minutes with no drilling.

The slide-in design keeps lines from tangling when you pull a rod out.

The size is 1.5 by 24.5 by 7 inches and the weight is 1.13 kg, so it is a compact rail rack. The foam helps with tapered and standard blanks alike, since the inserts create a snug seat for each rod.

The trade-off is the clamp limit and the exclusions. SPIRRELAB says it does not fit trucks with bed slides, bed covers or camper tops.

Check your rail thickness and any cover hardware before you order this 4-rod rack.

SPIRRELAB Aluminum Fishing Rod Holder for TruckCheck it on Amazon
8

GADFISH Fishing Rod Holder for Truck Bed: Best for adjustable 6-rod storage

GADFISH Fishing Rod Holder for Truck Bed, truck bed fishing rod holders
8.2/10Our score
  • 6-rod capacity
  • Adjustable plastic clamps
  • Ultra-lightweight aluminum alloy
  • Rubber band rope
  • Two mounting options

A lightweight aluminum alloy rack that holds 6 rods with adjustable clamps for tapered rods, rubber band rope security, and vertical or horizontal storage.

See it on Amazon

Pros

  • 6-rod capacity
  • Adjustable clamps for tapered rods
  • Lightweight aluminum alloy

Cons

  • Fits rod size to 2 cm
  • Panels up to 3 in thick only

GADFISH suits drivers who want 6 rods in a lightweight rack with adjustable clamps. The clamps fit various rod sizes, including tapered profiles, and you can adjust each clamp to the rod length for a custom fit.

The body is ultra-lightweight aluminum alloy.

Rods can sit vertically or horizontally along the truck angle. A high-elasticity rubber band rope and multi-layered reinforcement help keep rods in place in transit.

The rack measures 8 by 2 by 3 inches, so it takes little rail space for a 6-rod holder.

GADFISH lists fit for most trucks and plywood panels up to 3 inches thick, with no complex tools for install. The fits rod size spec is 2 centimeters, so check your thickest blank or grip against that limit.

The trade-off is that surface mounting and clamp adjustment need a solid panel or rail. If you want a clamp that fits a thick bed lip, the Brocraft 2.5 inch opening is a wider option.

If you want tailgate storage, the top pick leaves the rail free.

GADFISH Fishing Rod Holder for Truck BedCheck it on Amazon

How do tailgate, clamp-on and cross-bed rod holders compare?

Tailgate racks leave the bed open, clamp-on racks use the bed rail, and cross-bed racks span the bed width. Each style suits a different bed setup and rod count.

Tailgate racks, such as the top pick, strap to the tailgate cap and hold rods at the rear. They free bed space for coolers and tackle, but they need a tailgate that fits the rack.

Clamp-on racks, such as the JOYTUTUS and Brocraft, grip a bed rail or boat surface. They keep rods along the side of the bed, but clamp thickness and covers limit fit.

Cross-bed racks, such as the Portarod Inshore, ratchet a bar across the bed against the side walls. They hold rods upright near the cab, but they need clear side walls and bed space across the width.

ProductBest forCapacityMounting typeMaterial typeOur score
Fishing Rod Holder for Truck Tailgatetailgate carry4 rodsTailgate MountPlastic9.7
VEYWANE Fishing Rod Racks for Boat/Wall/Truck Bedflexible mounting3 poles per rackWall MountPlastic9.6
JOYTUTUS Truck Bed Fishing Rod Holder6 rods on a clamp6 rodsClamp-onMetal9.4
Brocraft 4 Rod Truck Bed Rod Holdertruck, boat and canoe4 rodsClamp MountAluminum, Nylon9.2
Portarod Inshore Rod Holder for Truck Bedcross-bed fit5 rodsTruck BedAluminum9.0
Portarod Inshore Rod Holder for Truck Bed4 rods cross-bed4 rodsTruck BedAluminum8.7
SPIRRELAB Aluminum Fishing Rod Holder for Truckfoam-lined 4-rod carry4 rodsClamp MountAluminum8.5
GADFISH Fishing Rod Holder for Truck Bedadjustable 6-rod storage6 rodsSurface MountAluminum8.2

How we compared these truck bed rod holders

We checked specs for capacity, mounting type, clamp size, materials and weight for each rack. We ranked by score, with higher capacity, wider fit and no-drill installs weighing more for a truck bed search.

We also checked each maker's stated limits. Those limits include clamp thickness, bed slides, cargo covers and camper tops, since those features decide whether a rack fits your truck at all.

Our score weighs specs, features and buyer feedback against what you're shopping for. We did not test these racks, and we label maker claims with the brand name.

Which truck bed rod holder fits your bed?

Measure your tailgate cap, bed rail thickness and bed width, then pick the mount that fits those numbers. The best fishing rod holder for a truck bed depends on that fit more than on rod count alone.

Start with the mount you can actually use. A tailgate rack needs a flat cap and a clean strap path.

A clamp-on rack needs a rail lip within the clamp range. A cross-bed rack needs side walls the bar can ratchet against.

Tailgate racks

Tailgate racks suit drivers who want the bed free for gear. The Rod Hauler top pick holds 4 rods upright on the tailgate with foam inserts and straps.

Check the cap width and the strap grooves before you order. A cap that is too narrow or too rounded may not seat the rack well.

Clamp-on racks

Clamp-on racks suit drivers who want rods along the bed rail. Check the clamp opening against your rail thickness, since limits here range from 1.5 to 2.5 inches.

Also check for slide rails, cargo covers and camper tops. Those features block the clamp surface on some trucks, and the maker notes call them out.

Cross-bed racks

Cross-bed racks suit drivers who want rods upright across the bed. The Portarod bar expands from 53 to 84 inches and adjusts rod angle and spacing.

Measure the inside width of your bed at the height where the bar will sit. A liner or a raised wheel well can change the fit.

How many rods should your truck bed holder carry?

Four rods suit most trips, and 6 rods suit a full multi-species set. Match the count to the rods you bring, not to the largest rack you can find.

A 4-rod rack is lighter, takes less rail space and is easier to store. It fits two anglers carrying a spinning rod, a casting rod and spares.

A 6-rod rack, such as the JOYTUTUS or GADFISH, suits surf, catfish and bass sets carried together. Ask whether you will use all 6 on one trip before you pay for the extra holders.

Rod diameter and reel size

Check the holder size against your thickest blank and your largest reel. Foam inserts and adjustable clamps help, but a reel that is wider than the slot will not seat well.

Space the holders so reels do not knock each other on rough roads. Adjustable spacing, such as on the Portarod, helps with mixed rod and reel sizes.

Weight and storage

Heavier racks, such as a 9-pound cross-bed bar, need garage space and a spot in the bed when removed. Lighter tailgate and plastic racks store in a small corner.

Weigh the rack against the rods it carries. A rack that is close to the weight of your rods will be harder to move on and off the truck.

Can you use a truck bed rod holder on a boat or at home?

Some racks here list boat and wall use, while cross-bed systems are truck-only. Check the mount type before you move a rack between jobs.

The JOYTUTUS, Brocraft and VEYWANE racks list boat use along with truck use. The Brocraft clamp can move from a truck bed edge to a canoe or pontoon surface.

The VEYWANE racks can mount horizontally on a wall, boat deck or truck bed. That makes them a garage storage option as well as a travel rack.

For more storage ideas, see our best fishing rod holders guide, our best wall mounted fishing rod holder picks and our best fishing rod holder stand options.

Fly rods and long rods

Fly rods are long and thin, so a rack with adjustable spacing helps keep tips apart. If you mostly carry fly rods, compare our best fly rod holder for truck guide before you choose a general rack.

A general truck rack can still work if the holders fit your rod diameter and the rack keeps tips from crossing on bumpy roads.

Smaller vehicles

If you drive a car, SUV, bike or motorcycle, a truck bed rack will not fit. See our best fishing rod holder for car guide, our best fishing rod holder for suv guide, our best fishing rod holder for bike picks and our best fishing rod holder for motorcycle guide.

How do you install and care for a truck bed rod holder?

Install the rack on a parked truck, seat each rod, then check the straps or clamps before you drive. A short check at home prevents a rod from shifting on the first rough stretch.

For a tailgate rack, wrap the straps around the tailgate, close the tailgate, set the rack on the cap and tighten the straps into the grooves. For a clamp-on rack, tighten the C-clamp on a solid lip and test the pull on each holder.

For a cross-bed rack, set the bar against the cab wall, ratchet it against the side walls and adjust the rod angle. Remove the bar after the trip if you need the bed for cargo.

Care in general terms

Rinse salt, mud and grit from foam inserts, straps and clamps after a trip. Grit in a foam slot can scratch a blank over time.

Dry metal and aluminum parts before storage, and check bungee cords and rubber bands for cracks. Replace a worn strap or cord before it fails on the road.

Safety on the road

Keep rods within the rack so tips do not extend past the truck in a way that blocks lights or plates. Check rear visibility and your local rules for loads that extend beyond the bed.

Slow down on rough roads and recheck the straps at the first stop. A rack that feels tight in the driveway can settle after the first few miles.

Verdict: which fishing rod holder for a truck bed should you buy?

Pick the Fishing Rod Holder for Truck Tailgate for 4 rods and a free bed, the JOYTUTUS for 6 rods on a rail, and the Portarod Inshore for a cross-bed fit. Each pick matches the mount to the bed you own.

If your tailgate fits a strap rack and you carry 4 rods, the top pick keeps rods upright and separated with foam inserts. If you carry 6 rods, check the clamp limit and any slide rails or covers first.

If your bed has clear side walls, the Portarod 53 to 84 inch bar gives you adjustable angle and spacing with no drilling. Measure your bed width and rail thickness, then order the rack that fits those numbers.

For a broader look before you decide, start with our best fishing rod holders guide.

Our top 3 picks at a glance

  1. 1 Fishing Rod Holder for Truck Tailgate
    Best for tailgate carry

    Fishing Rod Holder for Truck Tailgate

    9.7/10 our score

    See it on Amazon
  2. 2 VEYWANE Fishing Rod Racks for Boat/Wall/Truck Bed
    Best for flexible mounting

    VEYWANE Fishing Rod Racks for Boat/Wall/Truck Bed

    9.6/10 our score

    See it on Amazon
  3. 3 JOYTUTUS Truck Bed Fishing Rod Holder
    Best for 6 rods on a clamp

    JOYTUTUS Truck Bed Fishing Rod Holder

    9.4/10 our score

    See it on Amazon

Frequently asked questions

What is the best fishing rod holder for a truck bed?

For most drivers, a tailgate rack is the simplest choice because it keeps 4 rods upright and leaves the bed free. If you carry 6 rods, a clamp-on rack that fits your bed rail is a better match.

Measure your rail or bed width before you order.

Do truck bed rod holders require drilling?

Most of the racks here do not require drilling. Tailgate racks use straps, clamp-on racks use C-clamps, and cross-bed systems use a ratcheting bar.

Check whether your bed has slide rails, a cover or a camper top before choosing a clamp model.

How many rods should a truck bed holder carry?

Four rods suit most two-person trips and keep the rack compact. Six rods suit a full set of spinning and casting rods for several species.

Match the count to the rods you actually bring, since extra holders add weight and take up rail space.

Can these racks also work on a boat?

Some can. The Brocraft, JOYTUTUS and VEYWANE racks list boat use, while the Portarod systems are built for truck beds.

Confirm the clamp opening or mounting surface on your boat before using a truck rack on the water.