Best picks

5 Best Fish Finder Transducer Arms (November 2026)

Updated on · By the Fish Finder Critic team

The best fish finder transducer arm include the Scotty #140 Kayak/SUP Transducer Mounting Arm for kayak and SUP anglers, the Scotty 0141 Kayak/SUP Transducer Mounting Arm for Scotty track systems, and the Brocraft Transducer Mounting Arm with Mount/Kayak Fish for longer reach.

On this page (9 sections)
  1. Our top fish finder transducer arms, compared
  2. The best fish finder transducer arms in detail
  3. Side by side: reach, mounts and what is included
  4. How we researched these transducer arms
  5. What type of transducer arm fits your boat or kayak?
  6. How much reach do you need for side imaging and down imaging?
  7. How do you set up and care for a transducer arm?
  8. Can you move a transducer arm between boats?
  9. Our verdict: which transducer arm should you buy?

The best fish finder transducer arm for most kayak anglers is the Scotty #140, because it combines an 11.5 to 18 inch telescoping reach, a 360 degree swivel and a slip disc for fine adjustment in one post-mount package. The Scotty 0141 is the better pick if you already run Scotty track gear.

The Brocraft wins on reach. The YakAttack options solve different problems, raising gear or adding battery storage.

A transducer arm matters because placement controls what your screen can show. The transducer needs to sit below the waterline, clear of hull turbulence, and at a steady angle.

An adjustable arm lets you set that position, then lift or fold the transducer clear for launching, landing and transport. That is the core job of every pick here.

Start with your mount type before you compare reach. A Scotty post mount, a YakAttack track and a boat deck mount all call for different hardware.

Our guide to fish finder transducer mounting options walks through the main types so you can match the arm to the base you already have.

Our picks at a glance

  1. 1 Scotty #140 Kayak/SUP Transducer Mounting Arm
    Best for kayak and SUP anglers

    Scotty #140 Kayak/SUP Transducer Mounting Arm

    9.7/10 our score

    See it on Amazon
  2. 2 Scotty 0141 Kayak/SUP Transducer Mounting Arm
    Best for Scotty track systems

    Scotty 0141 Kayak/SUP Transducer Mounting Arm

    9.6/10 our score

    See it on Amazon
  3. 3 Brocraft Transducer Mounting Arm with Mount/Kayak Fish
  1. 4YakAttack 8" Extension Arm for LockNLoad AccessoriesCheck it
  2. 5YakAttack CellBlok with Switchblade Transducer Arm Combo

    YakAttack CellBlok with Switchblade Transducer Arm Combo

    Best for a complete power and mount setup
    Check it

Our top fish finder transducer arms, compared

The Scotty #140 leads for kayak and SUP use because it is compact, adjustable and complete out of the box. The Scotty 0141 follows for anglers invested in Scotty track gear.

The Brocraft suits boaters who need more reach. The two YakAttack picks are specialists, one for height and one for power.

Our score weighs specs, features and buyer feedback against what you are shopping for. Reach, mount compatibility, adjustment and whether the package is complete all count.

A longer arm does not score higher by itself. It scores higher only when that length fits the search.

The best fish finder transducer arms in detail

1

Scotty #140 Kayak/SUP Transducer Mounting Arm: Best for kayak and SUP anglers

Scotty #140 Kayak/SUP Transducer Mounting Arm, fish finder transducer arm
9.7/10Our score
  • Telescopes from 11.5 to 18 inches
  • Swivels 360 degrees
  • Includes 241L Locking Combination Side/Deck Mount
  • Includes 415 slip disc for micro adjustments
  • Fits all Scotty post mounts
  • Transducer not included

A compact telescoping arm for kayak and SUP anglers who want an easy way to install a transducer for transport and remove it when they reach the launch.

See it on Amazon

Pros

  • Telescopes to 18 inches
  • Swivels 360 degrees
  • Slip disc allows micro adjustments
  • Includes side and deck mount

Cons

  • Transducer is not included
  • Shorter maximum reach than the Brocraft

The Scotty #140 suits kayak and SUP anglers who want a simple way to install a transducer for transport and take it off again at the launch. It telescopes from a compact 11.5 inches to 18 inches, so you can shorten it for carrying and extend it to put the transducer in clean water.

The arm swivels 360 degrees, which helps you swing the transducer to the side or top of the hull while you launch and land. The included 415 slip disc offers micro adjustments, so you can fine-tune the angle after the main position is set.

That small adjustment matters for keeping a steady sonar picture.

It includes the 241L Locking Combination Side/Deck Mount and a Scotty post that fits into any Scotty rod holder mount. That makes this a complete mounting package if you already use Scotty bases.

The transducer itself is not included, so budget for that separately.

Scotty makes it from high strength composite material, listed as nylon, and it weighs 16 ounces. Corrosion is less of a concern with a composite arm than with bare metal, which suits saltwater use.

The trade-off against the Brocraft is reach. At 18 inches fully extended, it reaches less far than the 25 inch Brocraft.

Scotty #140 Kayak/SUP Transducer Mounting ArmCheck it on Amazon
2

Scotty 0141 Kayak/SUP Transducer Mounting Arm: Best for Scotty track systems

Scotty 0141 Kayak/SUP Transducer Mounting Arm, fish finder transducer arm
9.6/10Our score
  • Telescopes from 11.5 to 18 inches
  • Swivels 360 degrees
  • Includes 438 gear-head track adapter
  • Drops and locks Scotty post-mount accessories
  • Made of high strength composite material

Built for kayak and SUP anglers who already use Scotty gear, this arm adds a gear-head track adapter so you can drop and lock a fishfinder mount or other post-mount accessory on top.

See it on Amazon

Pros

  • Includes gear-head track adapter
  • Works with Scotty slide track
  • Telescopes and swivels for positioning
  • High strength composite construction

Cons

  • Universal sounder mount is sold separately
  • Scotty slide track is sold separately

The Scotty 0141 suits kayak and SUP anglers who already use Scotty accessories and want one arm to carry more than a transducer. It telescopes from 11.5 to 18 inches and swivels 360 degrees, the same core motion as the #140.

The difference is the included 438 gear-head track adapter. That adapter works with the Scotty slide track and lets you instantly drop and lock a fishfinder mount or any other Scotty post-mount accessory on top of the 141.

If your other gear already uses Scotty post mounts, that shared base saves you from carrying extra mounts.

Scotty says the adapter also enables attachment of the Scotty universal sounder mount if you want it. Note that the universal sounder mount and the Scotty slide track are sold separately.

Check what you already own before you count on that full setup.

It is made of high strength composite material and weighs 16 ounces. The trade-off against the #140 is focus.

The #140 is a dedicated transducer arm with a locking side and deck mount included. The 0141 is a platform for Scotty gear in general, so it suits anglers who plan to swap accessories on the same base.

Scotty 0141 Kayak/SUP Transducer Mounting ArmCheck it on Amazon
3

Brocraft Transducer Mounting Arm with Mount/Kayak Fish: Best for longer reach

Brocraft Transducer Mounting Arm with Mount/Kayak Fish, fish finder transducer arm
9.5/10Our score
  • Telescopes from 17 to 25 inches
  • Swivels 360 degrees
  • Includes slip disc for micro adjustments
  • Marine grade aluminum transducer arm
  • Plastic fibre reinforced engineering nylon

The longest arm in this group, the Brocraft extends from 17 to 25 inches and suits powerboats, canoes, pontoons, inflatable boats and kayaks where a short arm leaves the transducer too close to the hull.

See it on Amazon

Pros

  • Longest reach at 25 inches
  • Swivels 360 degrees
  • Slip disc for micro adjustments
  • Suits several boat types

Cons

  • Longest collapsed length at 17 inches
  • Fewer buyer reports than the Scotty arms

The Brocraft suits anglers on powerboats, canoes, pontoons, inflatable boats and kayaks who find that 18 inches of reach leaves the transducer too close to the hull. It telescopes from 17 to 25 inches, the longest range in this group by a clear margin.

That extra length helps on wider hulls and on boats where the mount point sits well inboard from the waterline. It also helps side imaging setups, where separation from the hull can reduce interference in the picture.

The arm swivels 360 degrees, so you can swing it clear when you are not fishing.

It includes a slip disc that offers micro adjustments when needed, matching the fine-tuning feature on the Scotty arms. The transducer arm is described as marine grade aluminum, with plastic fibre reinforced engineering nylon elsewhere in the build.

At 0.56 kg, it is heavier than the 16 ounce Scotty arms, which is typical for a longer arm.

The trade-off is collapsed size. Even at its shortest, it is 17 inches long, so it needs more room on a small kayak deck than the Scotty arms at 11.5 inches.

Choose it for reach and boat versatility. Choose a Scotty arm for a tighter deck.

Brocraft Transducer Mounting Arm with Mount/Kayak FishCheck it on Amazon
4

YakAttack 8" Extension Arm for LockNLoad Accessories: Best for raising existing gear

YakAttack 8" Extension Arm for LockNLoad Accessories, fish finder transducer arm
9.0/10Our score
  • Adds 8 inches of elevation
  • Fits YakAttack LockNLoad accessories
  • Includes stainless steel hardware
  • Injection-molded construction
  • Made in the USA

An 8 inch riser for YakAttack rod holders, fish finder mounts and camera gear that use the LockNLoad system, raising gear for easier reach and visibility on sit-on-top kayaks.

See it on Amazon

Pros

  • Adds 8 inches of height
  • Fits LockNLoad accessories
  • Includes all required hardware
  • Works with most track-mounted setups

Cons

  • Raises gear rather than deploying a transducer directly
  • Only fits YakAttack LockNLoad accessories

The YakAttack 8 inch Extension Arm suits anglers whose fish finder mount, rod holder or camera gear sits too low for easy reach or a clear view. It adds 8 inches of elevation to any YakAttack accessory that uses the LockNLoad mounting system.

On a sit-on-top kayak or a low seat, that height can put a display within sight without leaning. It also raises a mount above splashing water in choppy conditions.

The arm fits any YakAttack accessory using the LockNLoad base and can be configured with most track-mounted kayak setups.

YakAttack uses injection-molded construction that resists flex, and it includes all required stainless steel hardware. It is made in the USA and backed by the YakAttack Built for Life Guarantee.

The listed weight is 4.54 g, so this is a light add-on rather than a structural part of your rig.

Be clear about what it does. This arm raises existing gear.

It does not deploy a transducer below the waterline by itself. If your problem is screen height or reach, it is a smart fix.

If your problem is transducer placement, you need a dedicated transducer arm such as the Scotty or Brocraft models above.

YakAttack 8" Extension Arm for LockNLoad AccessoriesCheck it on Amazon
5

YakAttack CellBlok with Switchblade Transducer Arm Combo: Best for a complete power and mount setup

YakAttack CellBlok with Switchblade Transducer Arm Combo, fish finder transducer arm
8.8/10Our score
  • Includes CellBlok battery box and SwitchBlade transducer arm
  • Tool-free, track-mounted installation
  • Fits GearTrac, MightyMounts and most kayak tracks
  • SwitchBlade has a folding, low-drag blade design
  • CellBlok weighs 1.4 lbs

A complete kayak fish finder solution that pairs a battery box for a 10Ah battery with a folding SwitchBlade transducer arm, mounted to a track without drilling.

See it on Amazon

Pros

  • Battery box plus transducer arm in one combo
  • Tool-free track installation
  • Folding low-drag blade design
  • No drilling required with a compatible track

Cons

  • Display, battery and transducer are not included
  • Needs enough track space for the full setup

The YakAttack CellBlok with Switchblade combo suits kayak anglers who want power and transducer placement in one track-mounted package. It combines the CellBlok battery box with the SwitchBlade transducer arm for a streamlined fish finder setup.

Installation is tool-free and track-mounted. It attaches to YakAttack GearTrac, MightyMounts and most kayak track systems from RAM, Scotty and YakGear without drilling.

That no-drill approach makes the whole rig easy to move between kayaks that share compatible track hardware.

The CellBlok is a compact, injection-molded battery box that weighs 1.4 lbs on its own. It houses 10Ah batteries such as Nocqua or Dakota Lithium, with upgraded cable wraps to keep wiring organized.

The full combo weighs 2.7 pounds, so factor that into your load.

The SwitchBlade features a folding, low-drag blade design that reduces noise and improves sonar clarity. It adjusts in length for side imaging compatibility and folds away for transport, launching and landing.

YakAttack builds it with premium marine-grade materials for saltwater or freshwater use.

The trade-off is scope. The display, battery and transducer are not included, and you need enough track space for the complete setup.

Check your battery dimensions, cable routing and transducer fit before you order. If you already have power sorted, a dedicated arm such as the Scotty #140 costs less in weight and space.

YakAttack CellBlok with Switchblade Transducer Arm ComboCheck it on Amazon

Side by side: reach, mounts and what is included

ProductBest forReachMounting TypeMaterialOur score
Scotty #140 Kayak/SUP Transducer Mounting Armkayak and SUP anglers11.5 to 18 inchesPost MountNylon9.7
Scotty 0141 Kayak/SUP Transducer Mounting ArmScotty track systems11.5 to 18 inchesPole MountPlastic9.6
Brocraft Transducer Mounting Arm with Mount/Kayak Fishlonger reach17 to 25 inchesVehicle MountAluminum, Nylon9.5
YakAttack 8" Extension Arm for LockNLoad Accessoriesraising existing gear8 inches of elevationSurface MountAluminum9.0
YakAttack CellBlok with Switchblade Transducer Arm Comboa complete power and mount setupTrack MountMarine-grade materials8.8

We compared these arms on four things: how far they reach, how they mount, how they adjust, and what you get in the box. The Scotty arms reach 18 inches and swivel 360 degrees.

The Brocraft reaches 25 inches. The YakAttack extension adds height, not reach.

The CellBlok combo adds power storage.

Mount type is the first filter. Scotty post mounts suit Scotty bases.

Track mounts suit GearTrac and similar tracks. The YakAttack extension fits only LockNLoad accessories.

Our roundup of best fish finder transducer mounts for boats covers fixed boat mounts if an arm is not what you need.

Adjustment is the second filter. Slip discs on the Scotty #140 and Brocraft allow micro adjustments after you set the main position.

The SwitchBlade adjusts in length and folds. The extension arm adjusts height in one fixed 8 inch step.

What is included is the third filter. The Scotty #140 includes a locking side and deck mount.

The Scotty 0141 includes a gear-head track adapter, but the sounder mount and slide track are separate. The CellBlok combo includes a battery box, but not a battery or display.

Always check the box contents against your existing gear.

How we researched these transducer arms

We compared specs, features and buyer feedback for each arm against what a fish finder transducer arm needs to do. That means reach, mount compatibility, adjustment range, weight, materials and what is included.

We did not test these arms on the water. We researched the published specs and what buyers often mention about fit and daily use.

Where a brand makes a claim, we label it as that brand's claim.

We weighted completeness as well as performance. An arm that arrives ready to mount scores above one that needs extra adapters, unless those adapters match gear you already own.

That is why the Scotty #140 leads and the more specialized YakAttack picks follow.

What type of transducer arm fits your boat or kayak?

The right arm depends on your hull and your existing base. Kayak and SUP anglers who use Scotty post mounts should start with the Scotty #140 or 0141.

Anglers with YakAttack tracks should look at the CellBlok combo or the 8 inch extension arm.

Boaters on powerboats, pontoons or inflatable boats should consider the Brocraft, which is made for those hulls as well as kayaks and canoes. Its 25 inch reach suits wider boats where a short kayak arm falls short.

If you are still deciding between mounting styles, read our guide to how to mount a fish finder transducer. It explains fixed mounts, arms and in-hull options.

Some anglers skip an arm entirely, and our look at fish finders with in hull transducers covers when that setup fits.

Scotty post-mount arms

Post-mount arms slide into an existing Scotty base, so they suit anglers who already run Scotty rod holders or mounts. The #140 includes a locking side and deck mount for a complete setup.

The 0141 adds a gear-head track adapter for swapping Scotty accessories on one base.

Track-mounted arms and combos

Track-mounted gear attaches to GearTrac, MightyMounts or similar tracks without drilling. The CellBlok combo is the fullest version, adding battery storage.

Track-mounted setups move easily between kayaks with compatible tracks.

Boat deck and long-reach arms

Larger boats often need more reach than a kayak arm provides. The Brocraft extends to 25 inches and is made for powerboats and pontoons.

For fixed boat installations, compare our pick for the best garmin fish finder transducer mount if you run a Garmin display.

How much reach do you need for side imaging and down imaging?

Reach matters most for side imaging, where the transducer needs clear water beside the hull. A short arm can leave the transducer in the hull's wake.

A longer arm such as the Brocraft at 25 inches gives more separation.

For down imaging and traditional 2D sonar, a shorter arm such as the Scotty models at 18 inches is often enough. What matters more is that the transducer sits below the waterline and holds a steady angle.

Adjustable length helps in shallow water. You can shorten the arm or lift the transducer as you move into skinny water, then extend it again in deeper water.

The SwitchBlade folds for the same reason, so you can tuck it away for transport.

Before you buy, think about whether your fish finder actually earns its space on your boat. Our guide on whether fish finders really work helps you match the mount to the job your sonar does.

How do you set up and care for a transducer arm?

Set the mount first, then the arm position, then the angle. Lock the base, extend the arm to your chosen length, and use the slip disc or blade adjustment to fine-tune the angle.

Check that the transducer sits below the waterline at rest.

Route the cable so it does not snag during casting or landing. A cable that catches on the arm can pull the transducer out of position.

Secure it along the arm with enough slack to allow the swivel to move.

Rinse the arm with fresh water after saltwater use and let it dry before you stow it. Composite and plastic arms resist corrosion, but grit in the telescoping section can make it stiff.

Wipe the sliding parts clean and check the locking hardware each season.

Store the arm collapsed and dry. The Scotty arms collapse to 11.5 inches and the Brocraft to 17 inches, so measure your storage space before you buy.

A longer arm that does not fit your storage plan is a hassle every trip.

Can you move a transducer arm between boats?

Yes, if both boats share a compatible mount. Track-mounted setups such as the CellBlok combo move easily between kayaks with GearTrac or similar tracks.

Post-mount arms move between boats with matching Scotty bases.

Fixed deck mounts are harder to move, since they need drilling or permanent hardware. That is one reason arms suit anglers who fish from more than one kayak or a friend's boat.

Measure both mount points before you plan a transfer. Track spacing, deck width and storage space all affect whether the same arm works in both places.

The arm may fit, while the cable length or battery box does not.

Castable fish finders offer another portable option with no mount at all. Our explainer on how a castable fish finder works covers that route if mounting hardware sounds like too much work.

Our verdict: which transducer arm should you buy?

Buy the Scotty #140 if you fish from a kayak or SUP with Scotty post mounts. It is the most complete package here, with a locking mount, 18 inch reach and micro adjustment.

Buy the Scotty 0141 if you already run Scotty track gear and want to swap fish finder mounts and other accessories on one base. Buy the Brocraft if you need reach for a powerboat, pontoon or wide hull.

Buy the YakAttack 8 inch extension arm if your gear is too low and you use LockNLoad accessories. Buy the CellBlok combo if you want power and a transducer arm in one track-mounted rig and have the track space for it.

Next, confirm your mount type and measure your space before you order. Then pick the arm that fits the base you already have, not the one with the longest reach on paper.

Our top 3 picks at a glance

  1. 1 Scotty #140 Kayak/SUP Transducer Mounting Arm
    Best for kayak and SUP anglers

    Scotty #140 Kayak/SUP Transducer Mounting Arm

    9.7/10 our score

    See it on Amazon
  2. 2 Scotty 0141 Kayak/SUP Transducer Mounting Arm
    Best for Scotty track systems

    Scotty 0141 Kayak/SUP Transducer Mounting Arm

    9.6/10 our score

    See it on Amazon
  3. 3 Brocraft Transducer Mounting Arm with Mount/Kayak Fish

Frequently asked questions

What is a fish finder transducer arm used for?

A fish finder transducer arm holds your transducer below the waterline so the sonar can read the bottom and fish. Most arms in this guide mount to a kayak, SUP or small boat, then let you deploy the transducer for fishing and lift or fold it for transport and shallow water.

Can I use a transducer arm on a boat instead of a kayak?

Yes, some arms suit more than kayaks. The Brocraft arm is made for powerboats, canoes, pontoons, inflatable boats and kayaks.

The Scotty arms are aimed at kayak and SUP anglers.

Check the mount type and reach against your hull before you buy.

Do I need to drill holes to install a transducer arm?

Not always. Track-mounted options such as the YakAttack CellBlok combo and the Scotty 0141 with its gear-head adapter attach to kayak tracks.

Post-mount options fit existing Scotty mounts.

Drill only if the mount you choose requires it.

How long should a transducer arm be?

Length depends on hull shape and where you mount it. Shorter arms such as the Scotty models at 11.5 to 18 inches suit many kayaks.

Longer arms such as the Brocraft at 17 to 25 inches give more separation from the hull on larger boats.