Best picks

6 Best Lowrance Trolling Motor Transducer Mounts (November 2026)

Updated on · By the Fish Finder Critic team

The best Lowrance trolling motor transducer mounts include the folosem 410150-1 1840201 MKR-15 Transducer Mounting Kit for Minn Kota lower unit fit, the Lowrance PDT-WBL Trolling Motor-Mount Transducer for a complete Lowrance setup, and the BERPSE 000-12603-001 Transom Transducer Mount Bracket for StructureScan transducers.

On this page (7 sections)
  1. Best Lowrance trolling motor transducer mounts for each setup
  2. How these mounts were compared
  3. Which transducer do you own?
  4. How do I choose the right shaft size?
  5. How do I route the cable so it does not snag?
  6. Can I add GPS and Spot-Lock to a trolling motor?
  7. What is the verdict for Lowrance owners?

The best Lowrance trolling motor transducer mount for most Minn Kota motors is the folosem 410150-1 1840201 MKR-15 kit, because it fits listed shaft diameters and works with transom transducers from Lowrance and other major brands. If you want a transducer and mount in one package, the Lowrance PDT-WBL is the more complete choice.

A good mount does one job well. It holds the transducer at the right angle, keeps it from vibrating, and puts the cable where it will not snag.

Our score weighs specs, features and buyer feedback against what you are shopping for.

We compared fit, hardware, materials and transducer compatibility across these six picks. We checked the specs for shaft sizes, pipe sizes, included hardware and views.

Buyers often mention vibration, cable routing and fit as the deciding factors.

Our picks at a glance

  1. 1 folosem 410150-1 1840201 MKR-15 Transducer Mounting Kit
    Best for Minn Kota lower unit fit

    folosem 410150-1 1840201 MKR-15 Transducer Mounting Kit

    9.7/10 our score

    See it on Amazon
  2. 2 Lowrance PDT-WBL Trolling Motor-Mount Transducer
    Best for a complete Lowrance setup

    Lowrance PDT-WBL Trolling Motor-Mount Transducer

    9.6/10 our score

    See it on Amazon
  3. 3 BERPSE 000-12603-001 Transom Transducer Mount Bracket
    Best for StructureScan transducers

    BERPSE 000-12603-001 Transom Transducer Mount Bracket

    9.3/10 our score

    See it on Amazon
  1. 4Lowrance 000-15770-001 Active Target Sonar Trolling MotorCheck it
  2. 5Holicfun Pole Mount for Lowrance Eagle Eye

    Holicfun Pole Mount for Lowrance Eagle Eye

    Best for kayak and pole mounting
    Check it
  3. 6Boatersports Boater Sports

    Boatersports Boater Sports

    Best for a simple trolling motor mount
    Check it

Best Lowrance trolling motor transducer mounts for each setup

The best Lowrance trolling motor transducer mount depends on your motor, your transducer and where you want it to sit. Start with your transducer first, then match the bracket to it.

A transom transducer needs a bracket that replaces its normal transom position. An Active Target transducer needs a shaft mount built for its views.

A kayak transducer may need a pole mount instead of a motor mount.

For general mounting steps, see our guide to how to mount transducer on trolling motor. For cable care, see the best transducer cable clips for trolling motor.

1

folosem 410150-1 1840201 MKR-15 Transducer Mounting Kit: Best for Minn Kota lower unit fit

folosem 410150-1 1840201 MKR-15 Transducer Mounting Kit, Lowrance trolling motor transducer mounts
9.7/10Our score
  • Fits Minn Kota shaft diameters of 3-1/4, 3-5/8, 4 and 4-1/2 in
  • Works with transom transducers from Humminbird, Garmin, Lowrance and Eagle
  • Corrosion-resistant aluminum with stainless steel hardware

A direct-fit kit for Minn Kota bow and transom motors that holds a transom transducer on the lower unit without drilling.

See it on Amazon

Pros

  • Fits four listed shaft diameters
  • No drilling or permanent modification
  • Tool-free installation

Cons

  • For Minn Kota lower units, not every Lowrance mount
  • Transducer itself is not included

The folosem kit suits anglers with a Minn Kota bow or transom motor who already own a Lowrance transom transducer. It is built as a direct replacement for part numbers 410150-1, 1840201 and MKR-15.

It fits shaft diameters of 3-1/4, 3-5/8, 4 and 4-1/2 inches. That range covers many Minn Kota lower units, but you should measure your shaft before you order.

A bracket that is too loose will vibrate, and one that is too tight will not seat.

The body is corrosion-resistant aluminum with stainless steel hardware. That matters if you fish saltwater or leave the motor wet between trips.

The maker says it mounts with no drilling or permanent modification.

It also works with transom transducers from Humminbird, Garmin, Lowrance and Eagle without extra adapters. That makes it a strong choice if you switch brands later.

The kit is a surface mount for the lower unit and carries a 1 year warranty. It holds the transducer firmly to reduce vibration and misalignment at speed.

The trade-off is scope. This kit is for Minn Kota lower units.

It is not a universal mount for every Lowrance motor or for a pole on a kayak. The transducer itself is not included, so budget for that separately if you do not already own one.

folosem 410150-1 1840201 MKR-15 Transducer Mounting KitCheck it on Amazon
2

Lowrance PDT-WBL Trolling Motor-Mount Transducer: Best for a complete Lowrance setup

Lowrance PDT-WBL Trolling Motor-Mount Transducer, Lowrance trolling motor transducer mounts
9.6/10Our score
  • 200 kHz transducer with built-in temperature sensor
  • 12-foot cable
  • Contour curve top and hose clamp slot for mounting

A trolling motor-mount transducer with temperature sensing and a clamp slot that simplifies mounting to the motor.

See it on Amazon

Pros

  • Built-in temperature sensor
  • 12-foot cable
  • Hose clamp slot simplifies mounting

Cons

  • Single 200 kHz frequency
  • Plastic housing

The Lowrance PDT-WBL suits anglers who want a transducer and a trolling motor mount in one purchase. It is a trolling motor-mount skimmer, not just a bracket.

It runs at 200 kHz and has a built-in temperature sensor. The temperature reading can help you spot changes that often relate to fish location.

The cable is 12 feet long, so route it with slack for steering.

The top has a contour curve and a slot for a hose clamp. That design simplifies mounting to the trolling motor.

You still need to aim the face correctly for your beam angle.

Housing is plastic. That keeps weight low at 12.8 ounces, but it is a trade-off against metal brackets if you expect heavy impacts.

Lowrance lists compatibility with several models, including HDS-10, HDS-5 and 5x, and LCX models 112C and 113C. Check your display model before you buy, since transducer compatibility is not universal.

The included component is listed as the PDT-WBL 83/200 kHz trolling motor mount skimmer. That dual listing can confuse buyers, so confirm which frequency your display will use before install.

The trade-off is a single working frequency for most setups. If you need live views or wide side imaging, this skimmer will not provide those views that other picks here support.

Lowrance PDT-WBL Trolling Motor-Mount TransducerCheck it on Amazon
3

BERPSE 000-12603-001 Transom Transducer Mount Bracket: Best for StructureScan transducers

BERPSE 000-12603-001 Transom Transducer Mount Bracket, Lowrance trolling motor transducer mounts
9.3/10Our score
  • 000-12603-001 replacement bracket
  • Compatible with StructureScan 3D, HD and TotalScan transducers
  • Stainless steel with galvanized surface

A stainless steel transom bracket for StructureScan 3D, HD and TotalScan transducers, with transducer not included.

See it on Amazon

Pros

  • Made for StructureScan and TotalScan
  • Stainless steel construction
  • Fits transom, jack plate or steps

Cons

  • Transducer is not included
  • Transom style, not a shaft mount

The BERPSE bracket suits anglers using StructureScan 3D, HD or TotalScan transducers who need a sturdy transom bracket. It replaces part 000-12603-001.

It is made of stainless steel with a galvanized surface. That finish helps prevent rust and corrosion in wet use.

It mounts to a transom, a jack plate or under boat steps.

This is a transom mount, not a trolling motor shaft mount. That distinction matters.

If your goal is to keep a skimmer or side imaging transducer on the motor, this bracket will not do that job.

The transducer is not included. You are buying the bracket only, so pair it with a transducer you already own or plan to buy.

At 0.37 kg, it is a solid piece of hardware rather than a lightweight plastic arm. That weight helps explain its stainless construction and its aim at steady mounting under way.

For wide beam use and beam angle basics, see What Is a Wide Beam Transducer Used For?. That guide helps you match beam coverage to your fishing style.

The trade-off is placement. A transom bracket keeps imaging at the stern, where it can give a stable view but will not track your trolling motor direction.

Choose it for imaging quality at the transom, not for motor mounted steering.

BERPSE 000-12603-001 Transom Transducer Mount BracketCheck it on Amazon
4

Lowrance 000-15770-001 Active Target Sonar Trolling Motor: Best for Active Target shaft mounting

Lowrance 000-15770-001 Active Target Sonar Trolling Motor, Lowrance trolling motor transducer mounts
9.3/10Our score
  • Active Target trolling motor shaft mount
  • Forward, Scout and Down views
  • 2-year warranty from Lowrance

Lowrance's shaft mount kit for attaching an Active Target transducer to a trolling motor shaft.

See it on Amazon

Pros

  • Made for Active Target
  • Supports Forward, Scout and Down views
  • 2-year warranty

Cons

  • For Active Target use, not standard skimmers
  • Transducer compatibility must be checked

The Lowrance 000-15770-001 kit suits anglers who own an Active Target transducer and want it on a trolling motor shaft. It is a shaft mount, not a general skimmer bracket.

Lowrance says it attaches an Active Target transducer to the shaft for Forward, Scout and Down views. Those views are the reason to buy this kit.

A standard bracket will not position the transducer for live sonar views.

The kit carries a 2-year warranty from Lowrance. That is longer than the warranty on several other picks here.

It also signals that this is an OEM part, not a generic bracket.

The trade-off is narrow use. This kit is for Active Target.

If you own a standard Lowrance skimmer, this is the wrong mount.

Check your transducer model and motor shaft before you order. Active Target mounting needs the right angle for forward and down views, and a small error can change what you see on screen.

Forward view shows what is ahead of the boat. Down view shows below the boat.

Scout view gives a wider look ahead for searching. Each view depends on the mount holding the transducer at a repeatable angle.

Lowrance 000-15770-001 Active Target Sonar Trolling MotorCheck it on Amazon
5

Holicfun Pole Mount for Lowrance Eagle Eye: Best for kayak and pole mounting

Holicfun Pole Mount for Lowrance Eagle Eye, Lowrance trolling motor transducer mounts
8.8/10Our score
  • Designed for Lowrance Eagle Eye 9 in transducer
  • Fits 20 to 50 mm round pipes
  • Nylon build with stainless steel screws and silicone pad

A pole mount for the Lowrance Eagle Eye 9 on kayaks, canoes and boats, with hardware and anti-slip pad included.

See it on Amazon

Pros

  • Fits 20 to 50 mm round poles
  • Includes screws, hex key and silicone pad
  • No drilling required

Cons

  • Made for Eagle Eye 9, not all Lowrance transducers
  • Pole style, not a trolling motor shaft fit

The Holicfun pole mount suits kayak, canoe and small boat anglers who want to mount a Lowrance Eagle Eye 9 transducer to a round pole. It is not a trolling motor shaft mount.

It fits round pipes from 20 to 50 mm, or about 0.78 to 1.96 inches. That covers many kayak rails, boat rails and DIY poles.

Measure your pole before you order.

The build is heavy-duty nylon with stainless steel screws. The kit includes a hex key and a silicone anti-slip pad.

The pad wraps the pole to help prevent scratches and slippage.

That pad matters in rough water. A transducer that slips will change angle and hurt your sonar image.

The maker says no drilling is required.

The trade-off is transducer fit. This mount is designed for the Eagle Eye 9.

It will not fit every Lowrance transducer, and it will not clamp to a trolling motor shaft.

At 0.22 kg, the mount stays light enough for a kayak. The kit carries a 1 year warranty and includes six stainless steel screws.

That hardware helps pole mounts stay stable when wind and waves push the boat.

Holicfun Pole Mount for Lowrance Eagle EyeCheck it on Amazon
6

Boatersports Boater Sports: Best for a simple trolling motor mount

Boatersports Boater Sports, Lowrance trolling motor transducer mounts
8.6/10Our score
  • Trolling Motor Transducer Mount
  • Part number 52648
  • Lightweight at 0.64 ounces

A simple trolling motor transducer mount from Boatersports, listed as part 52648.

See it on Amazon

Pros

  • Simple trolling motor mount
  • Very light at 0.64 ounces
  • Compact package size

Cons

  • Few details given, so check fit before you order
  • No included transducer or views stated

The Boatersports mount suits anglers who want a simple trolling motor transducer mount without extra hardware or views. It is listed as part 52648.

At 0.64 ounces, it is very light. A light mount adds little weight to a motor that already carries a transducer and cable.

The package is compact at 8.5 x 5.28 x 0.75 inches. That helps if you store spare mounts in a boat compartment.

The trade-off is limited detail. Few specs are given for fit, shaft size or included hardware.

Check the exact fit for your motor and transducer before you order.

If you need corrosion-resistant metal, a temperature sensor or live sonar views, the other picks here give you more to work with. This pick is for a basic mount at a budget tier.

The listing dates to December 6, 2012 as its first available date. That long history can be a plus for simple designs, but it also means you should compare its shape against newer brackets before you assume it fits a current transducer.

For most Lowrance owners, this is a backup or replacement mount rather than a first choice. Pick it only after you confirm shaft fit, transducer shape and cable exit clearance on your exact motor.

Boatersports Boater SportsCheck it on Amazon

How these mounts were compared

We compared these six picks by fit first, then by transducer type, then by hardware and material. Fit matters most because a mount that does not match your shaft or pole will not hold a steady angle.

We also compared what is included. Some picks are brackets only.

One pick is a full transducer with a mount. One pick is a shaft kit for a specific live sonar transducer.

Material was another factor. Aluminum and stainless steel help in saltwater.

Nylon keeps weight low and resists corrosion. Plastic housing keeps a transducer light.

We checked warranty terms as stated by each brand. Lowrance gives 2 years on the Active Target shaft kit.

Folosem and Holicfun give 1 year on their kits.

If you are still choosing a motor, our trolling motor buying guide covers shaft length, thrust and features. Our guide to how to wire a 24v trolling motor covers power before you add electronics.

What fit means in practice

Fit covers more than diameter. It covers the shape where the bracket meets the transducer, the path where the cable leaves, and the space around the propeller.

A bracket can match a shaft size and still fail if the transducer face points a few degrees off. That small error can move your beam and change depth readings.

We treated included hardware as part of fit. A kit with screws, a hex key and a pad, like the Holicfun pole mount, needs less extra shopping.

A bracket only kit, like the BERPSE transom bracket, needs a transducer you already own.

We also gave weight more attention than it often gets. A mount at 0.64 ounces, like the Boatersports pick, adds almost no load.

A bracket at 0.37 kg, like the BERPSE pick, adds strength but also adds mass to a transom or jack plate.

Which transducer do you own?

Your transducer decides the mount, not the other way around. A standard skimmer, a StructureScan transducer, an Active Target transducer and an Eagle Eye transducer all sit differently.

Standard skimmer transducers

A standard skimmer like the PDT-WBL needs a mount that keeps its face aimed down at the right angle. The PDT-WBL has a hose clamp slot to help with that job.

For a transom skimmer you already own, the folosem kit holds it on a Minn Kota lower unit. That is a common path for Lowrance transducers from other boat positions.

If you are unsure about beam coverage, see what fish finders work on us2 transducers. That guide helps you match display and transducer before you mount anything.

StructureScan and TotalScan transducers

StructureScan 3D, HD and TotalScan transducers need a bracket built for their shape and beam. The BERPSE bracket is made for those models and mounts on a transom.

Its stainless steel build suits wet, rough use. It does not move the transducer to your trolling motor, so plan your boat layout with that in mind.

Active Target transducers

Active Target needs a shaft mount that sets the angle for Forward, Scout and Down views. The Lowrance 000-15770-001 kit is made for that exact job.

Do not use a standard skimmer bracket for Active Target. The views will be wrong, and the mount may not hold the transducer shape correctly.

Eagle Eye transducers on kayaks

The Eagle Eye 9 needs a pole mount if you fish from a kayak or canoe. The Holicfun mount fits round poles and protects the pole with a silicone pad.

Measure your pole diameter first. The fit range is 20 to 50 mm, and a pole outside that range will not clamp correctly.

How do I choose the right shaft size?

Measure your Minn Kota shaft diameter before you order a lower unit mount. The folosem kit fits 3-1/4, 3-5/8, 4 and 4-1/2 inches.

If your shaft is not in that list, do not force the fit. A loose mount will vibrate at speed.

A tight mount may damage the shaft or the bracket.

For broader options across brands and motor types, compare our best trolling motor transducer mounts guide. That guide covers more shaft shapes and transducer styles.

What should I check before I clamp a mount?

Check shaft diameter, transducer shape and cable exit point. The cable should leave the transducer without a sharp bend.

A tight bend can break wires over time.

Check that the mount clears the propeller and the motor housing through a full steering swing. A mount that hits at full turn will loosen or break.

Tighten hardware snugly, then check it again after your first trip. Vibration can work screws loose, even on a well-made mount.

Measure twice because a trolling motor moves constantly. A mount that looks clear at rest may hit the housing when the motor turns hard.

How do I route the cable so it does not snag?

Route the cable along the shaft with slack for steering. Too little slack will pull the transducer out of alignment.

Too much slack will snag on brush, rope or anchor lines.

Use cable clips made for trolling motors to keep the cable in place. Our guide to the best transducer cable clips for trolling motor covers clip types and spacing.

Keep the cable away from the propeller path. A cable that drops across the prop can be cut or tangled in seconds.

Leave a service loop near the transducer. That loop lets you adjust angle later without pulling the whole cable run.

Plan the route before you tighten the mount. Once the transducer is locked in place, a cable that exits on the wrong side can force you to start over.

For the PDT-WBL, the cable is 12 feet long. That length gives you room to route along a shaft and up to a display, but it also means you need clips or ties to manage extra length.

Can I add GPS and Spot-Lock to a trolling motor?

Yes, some motors support GPS features for holding position and tracking routes. That support depends on the motor model, not on the transducer mount.

If you want those features, check motor specs before you buy a mount. A mount that fits one motor may not fit a GPS motor with a different shaft or housing shape.

Our guide to trolling motor head with gps explains how GPS heads work and what to check. Pair that with a mount that fits your exact shaft size.

GPS does not change transducer angle. It holds the boat in place, while the mount still needs to keep the transducer steady in current and wind.

What is the verdict for Lowrance owners?

Pick the folosem MKR-15 style kit if you have a Minn Kota motor and a Lowrance transom transducer. It fits listed shaft sizes, uses corrosion-resistant metal and needs no drilling.

Pick the Lowrance PDT-WBL if you want a transducer and mount together. Its 200 kHz frequency, temperature sensor and 12-foot cable make it a complete package.

Pick the Lowrance Active Target shaft kit if you own Active Target. It is the only pick here built for Forward, Scout and Down views on a shaft.

Pick the Holicfun pole mount if you fish a kayak with a Lowrance Eagle Eye 9. It fits round poles from 20 to 50 mm and includes the hardware you need.

Pick the BERPSE bracket if your priority is a stainless steel transom mount for StructureScan 3D, HD or TotalScan. It keeps the transducer at the stern.

Pick the Boatersports mount only for a simple, light replacement after you confirm fit. Its 0.64 ounce weight is hard to beat, but its limited specs make it a riskier first purchase.

For your next step, read our guide to how to mount transducer on trolling motor before you install.

Our top 3 picks at a glance

  1. 1 folosem 410150-1 1840201 MKR-15 Transducer Mounting Kit
    Best for Minn Kota lower unit fit

    folosem 410150-1 1840201 MKR-15 Transducer Mounting Kit

    9.7/10 our score

    See it on Amazon
  2. 2 Lowrance PDT-WBL Trolling Motor-Mount Transducer
    Best for a complete Lowrance setup

    Lowrance PDT-WBL Trolling Motor-Mount Transducer

    9.6/10 our score

    See it on Amazon
  3. 3 BERPSE 000-12603-001 Transom Transducer Mount Bracket
    Best for StructureScan transducers

    BERPSE 000-12603-001 Transom Transducer Mount Bracket

    9.3/10 our score

    See it on Amazon

Frequently asked questions

What is the best Lowrance trolling motor transducer mount?

For most Minn Kota motors, the folosem MKR-15 style kit is the best Lowrance trolling motor transducer mount because it fits listed shaft diameters and holds a transom transducer from Lowrance. Confirm your shaft diameter and transducer style before you order.

Can I use a transom transducer on a trolling motor?

Yes, with a bracket made for that job. The folosem kit is designed to hold transom transducers from Lowrance, Humminbird, Garmin and Eagle on a Minn Kota lower unit.

Check shaft size and transducer shape so the beam angle stays correct.

Do I need a special mount for Active Target?

Yes. Lowrance makes the 000-15770-001 shaft mount kit specifically to attach an Active Target transducer to a trolling motor shaft.

A standard skimmer bracket will not give you the Forward, Scout and Down views that kit is built for.

Can I mount a Lowrance transducer to a kayak pole?

Yes, if your transducer matches the bracket. The Holicfun pole mount is designed for the Lowrance Eagle Eye 9 and fits round pipes from 20 to 50 mm.

It is a pole mount, not a trolling motor shaft mount.