6 Best Shoot-Through-Hull Transducers (October 2026)

The best shoot-through-hull transducers include the Lowrance 000-14886-001 9-Pin Shoot-Thru Hull M/H Chirp for compatible 9-pin CHIRP units, the Lowrance 000-0106-89 Shoot-Thru-Hull Transducer for 200 kHz with remote temperature, and the Faria 13751 Chesapeake Black Depth Sounder for a dedicated in-hull depth gauge.

On this page (4 sections)

1. How we chose shoot-through-hull transducers
2. The best shoot-through-hull transducers by use
3. What should you check before choosing an in-hull transducer?
4. Which shoot-through-hull transducer should you choose?

The best shoot through hull transducer for compatible Lowrance and Simrad units is the Lowrance 000-14886-001, a 9-pin medium/high CHIRP pod for depth sonar. For compatible Humminbird units on single-layer fiberglass, the XP-9-HW is an in-hull 2D CHIRP option.

A shoot-through-hull transducer can avoid a hole for the transducer itself, but the hull must suit the installation. These picks include in-hull sonar options and a few through-hull alternatives for comparison, so check your boat construction and display compatibility first.

Our picks at a glance

1. 1
   Best for compatible 9-pin CHIRP units

   Lowrance 000-14886-001 9-Pin Shoot-Thru Hull M/H Chirp

   9.7/10 our score

   See it on Amazon
2. 2
   Best for 200 kHz with remote temperature

   Lowrance 000-0106-89 Shoot-Thru-Hull Transducer

   9.5/10 our score

   See it on Amazon
3. 3
   Best for a dedicated in-hull depth gauge

   Faria 13751 Chesapeake Black Depth Sounder

   9.0/10 our score

   See it on Amazon

4. 4

   Furuno 525T-BSD Bronze Thru-Hull Transducer with Temperature

   Best for a bronze through-hull installation
   Check it
5. 5

   HawkEye DT2BX-TH In-Dash Depth Sounder with Air

   Best for depth and air temperature readings
   Check it
6. 6

   HUMMINBIRD XP-9-HW IN-HULL TRANSDUCER

   Best for Humminbird 2D CHIRP on fiberglass
   Check it

How we chose shoot-through-hull transducers

We compared mounting type, sonar details, temperature features and stated compatibility to find options for different boats and displays. Our score weighs specs and features against what you need from an in-hull sonar setup.

A shoot-through-hull model is only a fit when its sonar can pass through your hull and its connector works with your unit. The Lowrance 9-pin pick leads for compatible systems, while the Humminbird is specifically for single-layer fiberglass and selected HELIX models.

The best shoot-through-hull transducers by use

The right pick depends on your display, hull and whether you want depth only, CHIRP sonar or temperature readings. Check each model's mounting type before treating it as an in-hull option.

1

Lowrance 000-14886-001 9-Pin Shoot-Thru Hull M/H Chirp: Best for compatible 9-pin CHIRP units

9.7/10Our score

• Medium/high CHIRP
• 83/200 kHz
• 9-pin connector
• No temperature sensor

A shoot-thru-hull pod for compatible Lowrance and Simrad units. It is a depth-only choice without temperature.

See it on Amazon

Pros

• Medium/high CHIRP
• Compatibility includes several Lowrance and Simrad families
• Can also mount on a trolling motor

Cons

• No temperature sensor
• Compatibility and connector must match your unit

The Lowrance 000-14886-001 is the strongest fit here if you have a compatible 9-pin Lowrance or Simrad unit and want medium/high CHIRP depth sonar. Its 83/200 kHz measurement and pod design make it a focused option for a suitable in-hull installation.

Compatibility includes Lowrance HDS Live, HDS Carbon, Elite-Ti2, Elite Ti and HOOK2 12/7/5 models, along with Simrad NSS Evo3S, NSS Evo3, GO and SonarHub. Match the connector and unit model before buying, since a 9-pin plug alone doesn't confirm compatibility.

This transducer has no temperature sensor. It can also be mounted on a trolling motor, so it offers another mounting route if an in-hull installation doesn't suit your boat.

Choose it when your display is on the compatibility list and you want the stated CHIRP range. If temperature data is a priority, compare it with the Lowrance 000-0106-89.

2

Lowrance 000-0106-89 Shoot-Thru-Hull Transducer: Best for 200 kHz with remote temperature

9.5/10Our score

• 200 kHz pod
• Wide cone angle
• External temperature sensor

A 200 kHz pod with a wide cone angle and remote temperature sensor. Confirm fit with your fish finder before choosing it.

See it on Amazon

Pros

• External temperature sensor
• Wide cone angle
• Shoot-thru-hull mounting

Cons

• No stated unit compatibility
• No CHIRP range specified

The Lowrance 000-0106-89 suits a buyer who wants a 200 kHz pod with an external temperature sensor. Its wide cone angle and shoot-thru-hull mounting make it a distinct option from the higher-scoring 9-pin CHIRP model.

The transducer can also mount on a trolling motor. That flexibility may help if you need to change the installation approach, but confirm which mounting option works with your boat and display.

No specific fish-finder compatibility list or CHIRP range is provided for this model. Check the connector and compatibility for your unit before ordering, especially if you're replacing an existing transducer.

Choose this model for its external temperature sensor and 200 kHz frequency when it fits your system. Pick the 000-14886-001 if you need its listed 9-pin compatibility and medium/high CHIRP instead.

3

Faria 13751 Chesapeake Black Depth Sounder: Best for a dedicated in-hull depth gauge

9.0/10Our score

• In-hull transducer included
• Depth capability to 199 ft
• Fits a standard 2-1/16 in gauge hole

This package pairs a black depth sounder with an in-hull transducer. Check gauge-hole fit before ordering.

See it on Amazon

Pros

• Depth sounder and in-hull transducer included
• Stated depth capability of 199 ft
• Flush-mount display

Cons

• Gauge-hole fit needs confirmation
• A dedicated depth sounder rather than a fish-finder transducer

The Faria 13751 Chesapeake is a dedicated depth sounder with an in-hull transducer. It measures depth up to 199 ft and has a 2.4 in LCD display for a simple depth-reading setup.

Its flush-mount gauge fits a standard 2-1/16 in hole. Confirm that measurement against your existing dash opening before choosing it, since the fit affects whether the display can replace a current instrument.

This package is not described as a fish-finder sonar transducer, so consider it when you want a depth sounder rather than a replacement transducer for a chartplotter. Its stated current drain is 90 mA maximum with the supplied transducer.

Choose the Faria for an in-hull depth instrument with a defined depth capability. If you need CHIRP fish-finder sonar, compare the Lowrance and Humminbird transducers instead.

4

Furuno 525T-BSD Bronze Thru-Hull Transducer with Temperature: Best for a bronze through-hull installation

8.7/10Our score

• Bronze housing
• 50/200 kHz
• Temperature sensor
• 10-pin plug

This bronze through-hull model is a comparison point for boats where a hull fitting is acceptable. Its installation differs from an in-hull pod.

See it on Amazon

Pros

• 50/200 kHz
• Temperature sensor
• Fairing block included

Cons

• Requires a through-hull installation
• Connector compatibility needs checking

The Furuno 525T-BSD is a bronze through-hull transducer, included here as a comparison for boats where a hull fitting is acceptable. It operates at 50/200 kHz and includes a temperature sensor.

It has a 30 ft cable with a 10-pin plug, and its bronze housing uses a 7/8 in shaft. The product data says a fairing block is included, though the description also says it is sold separately, so confirm what comes with the exact unit before planning the installation.

A through-hull transducer differs from an in-hull pod because it needs an opening through the hull. If avoiding a hull penetration is the main goal, focus on the in-hull choices and confirm your boat is suitable for them.

Choose this Furuno only if its through-hull mounting, connector and sonar frequency fit your boat and display. For more options that use a hull fitting, see our best through hull transducer guide.

5

HawkEye DT2BX-TH In-Dash Depth Sounder with Air: Best for depth and air temperature readings

8.5/10Our score

• In-dash depth sounder
• Air and water temperature readings
• Through-hull transducer included

This depth sounder pairs a through-hull transducer with air and water temperature readings. Account for the required 2 in hole in the boat bottom.

See it on Amazon

Pros

• Air and water temperature readings
• Depth capability to 600 ft
• In-dash display

Cons

• Requires a 2 in hole in the boat bottom
• Not a shoot-through-hull installation

The HawkEye DT2BX-TH combines an in-dash depth sounder with air and water temperature readings. Its included transducer is through-hull, so it isn't a shoot-through-hull choice for avoiding a hole in the boat bottom.

The transducer requires a 2 in hole in the bottom of the boat. The sounder has a stated maximum measuring depth of 600 ft, and the included temperature features provide readings for both air and water.

This is a more complete depth-reading setup for someone considering a dedicated display, but the mounting requirement is a key tradeoff. Check the boat's construction and instructions before any installation work.

Choose the HawkEye if you want an in-dash depth instrument with air and water temperature and accept a through-hull transducer. For an in-hull installation, compare the Faria, Lowrance and Humminbird options instead.

6

HUMMINBIRD XP-9-HW IN-HULL TRANSDUCER: Best for Humminbird 2D CHIRP on fiberglass

8.1/10Our score

• Dual Spectrum CHIRP 2D sonar
• 150–220 kHz
• For single-layer fiberglass hulls
• No temperature

An in-hull option for compatible Humminbird units on single-layer fiberglass hulls. It provides 2D sonar only and has no temperature sensor.

See it on Amazon

Pros

• Dual Spectrum CHIRP 2D
• Designed for single-layer fiberglass hulls
• 15 ft cable

Cons

• No temperature sensor
• Compatibility is limited to a range of GPS-equipped HELIX models

The Humminbird XP-9-HW is an in-hull Dual Spectrum CHIRP 2D transducer for single-layer fiberglass hulls. It has a 150–220 kHz CHIRP range and a stated maximum depth of 1,200 ft.

Compatibility includes a range of GPS-equipped HELIX G2, G3 and G4 models. It's a 2D sonar source only, so it can work with Side Imaging or Down Imaging units as a 2D source, but it doesn't provide those imaging views.

The transducer has no temperature sensor and includes a 15 ft cable. Its in-hull installation uses epoxy, so check the instructions and confirm the hull is single-layer fiberglass before planning the mounting spot.

Choose it for compatible Humminbird 2D CHIRP sonar on a suitable fiberglass hull. If you need a different display ecosystem, check the Lowrance models' compatibility instead.

What should you check before choosing an in-hull transducer?

Start with hull construction and display compatibility, then check the sonar features you need. An in-hull transducer only makes sense when the hull can pass sonar and the unit supports that model.

Is your hull suitable for shoot-through-hull sonar?

The Humminbird XP-9-HW is specified for single-layer fiberglass hulls. Don't assume that a transducer designed for that construction will work through a different material or a cored hull.

A suitable mounting location also matters. Follow the transducer's installation instructions and your boat manufacturer's guidance, and confirm the hull area is appropriate before applying epoxy or other mounting materials.

Does the connector and model match your fish finder?

The Lowrance 000-14886-001 uses a 9-pin connector and names compatible Lowrance and Simrad device families. The Humminbird names selected HELIX GPS-equipped models, while the other options don't provide a full compatibility list here.

Check the exact fish-finder model, connector and supported sonar features. For a broader look at matching units and transducers, see our best transducer for fish finder guide.

Do you need CHIRP, temperature or depth only?

The Lowrance 000-14886-001 offers medium/high CHIRP at 83/200 kHz but no temperature sensor. The Humminbird has Dual Spectrum CHIRP 2D and no temperature, while the Lowrance 000-0106-89 includes external temperature and a 200 kHz pod.

The Faria and HawkEye are dedicated depth sounder packages, with different transducer mounting approaches. Decide whether you need a fish-finder sonar source, depth display or temperature readings before comparing them.

Is an in-hull installation the right alternative?

An in-hull transducer can suit a boat where avoiding a transducer opening is important, provided the hull construction and sonar compatibility work. A through-hull model may suit a different installation plan, but it does require a hull fitting.

Our in hull vs through hull transducer comparison explains the tradeoffs. If you want the basics first, read what a fish finder transducer does.

Which shoot-through-hull transducer should you choose?

Choose the Lowrance 000-14886-001 if you have a compatible 9-pin Lowrance or Simrad unit and want medium/high CHIRP depth sonar. Choose the Humminbird XP-9-HW for compatible HELIX 2D CHIRP on a single-layer fiberglass hull.

Pick the Lowrance 000-0106-89 when its 200 kHz sonar and external temperature sensor fit your system. If you need a dedicated depth gauge, consider Faria for in-hull mounting, and choose the HawkEye or Furuno only when their through-hull installation works for your boat.

See our best through hull transducer guide if you want to compare more models that use a hull fitting.

Our score weighs specs, features and buyer feedback against what you're shopping for.

Our top 3 picks at a glance

1. 1
   Best for compatible 9-pin CHIRP units

   Lowrance 000-14886-001 9-Pin Shoot-Thru Hull M/H Chirp

   9.7/10 our score

   See it on Amazon
2. 2
   Best for 200 kHz with remote temperature

   Lowrance 000-0106-89 Shoot-Thru-Hull Transducer

   9.5/10 our score

   See it on Amazon
3. 3
   Best for a dedicated in-hull depth gauge

   Faria 13751 Chesapeake Black Depth Sounder

   9.0/10 our score

   See it on Amazon

Frequently asked questions

Does a shoot-through-hull transducer need a hole?

A shoot-through-hull or in-hull transducer sits inside the boat and sends sonar through a suitable hull, so it avoids a transducer fitting through the hull bottom. The hull must allow the sonar signal to pass, and the transducer needs the right mounting spot and installation method.

Check the transducer and boat instructions before installation.

Can an in-hull transducer work through any boat hull?

No. The Humminbird XP-9-HW is specified for single-layer fiberglass hulls.

Hull material, core and construction affect whether sonar can pass through and how the transducer should be mounted.

Confirm suitability for your exact hull before buying.

What is the difference between shoot-through-hull and through-hull?

A shoot-through-hull transducer mounts inside the boat and sends sonar through the hull. A through-hull model passes through an opening in the hull, so its installation involves a hull fitting.

Choose based on your boat's construction, installation needs and fish-finder compatibility.

Do shoot-through-hull transducers show water temperature?

Some do, and some do not. The Lowrance 000-14886-001 and Humminbird XP-9-HW have no temperature sensor, while the Lowrance 000-0106-89 includes an external temperature sensor.

Check each model's temperature features and how its sensor connects to your setup.