Best picks

9 Best Minn Kota Trolling Motors (November 2026)

Updated on · By the Fish Finder Critic team

The best Minn Kota electric trolling motors include the Sunluway For Minn Kota 1854021 Quick Release for Ulterra and Terrova quick release, the HKAIMING Trolling Motor Plug for 12V quick connect power, and the Minn Kota Weedless Wedge 2 Prop for weedy water.

On this page (8 sections)
  1. How the best Minn Kota electric trolling motor parts were compared
  2. The best Minn Kota electric trolling motor parts for each setup
  3. Which Minn Kota motor families fit which boats?
  4. How do thrust, shaft length and voltage change boat control?
  5. Which quick release bracket fits your Minn Kota?
  6. How should you wire and protect a Minn Kota motor?
  7. What prop and remote upgrades help most in weeds and on deck?
  8. Verdict: best Minn Kota electric trolling motor setup

The best Minn Kota electric trolling motor for most boats is the one whose family, thrust and shaft fit your hull, then paired with the right quick release and sealed power connection. This guide compares the support parts that make a Minn Kota setup work day to day.

We compared specs, fit lists and included hardware across these nine parts. Our score weighs specs, features and buyer feedback.

We did not test them on the water.

On a Minn Kota rig, daily use is mostly removal, connection and protection. You lift the motor for transport, plug it in at the bow, reset a breaker and clear weeds from the prop.

Fit and included hardware matter as much as the headline part number.

Start with our trolling motor buying guide if you have not chosen thrust, shaft length or voltage yet. If you know you want a 12V system, our best 12v trolling motor roundup narrows the field before you add brackets and wiring.

Our picks at a glance

  1. 1 Sunluway For Minn Kota 1854021 Quick Release
    Best for Ulterra and Terrova quick release

    Sunluway For Minn Kota 1854021 Quick Release

    9.7/10 our score

    See it on Amazon
  2. 2 HKAIMING Trolling Motor Plug
    Best for 12V quick connect power

    HKAIMING Trolling Motor Plug

    9.6/10 our score

    See it on Amazon
  3. 3 Minn Kota Weedless Wedge 2 Prop
    Best for weedy water

    Minn Kota Weedless Wedge 2 Prop

    9.5/10 our score

    See it on Amazon
  1. 4sixcow For Minn Kota 1854017 RTA-17 Quick

    sixcow For Minn Kota 1854017 RTA-17 Quick

    Best for RTA-17 replacement fit
    Check it
  2. 5Moestoont Trolling Motor Plug

    Moestoont Trolling Motor Plug

    Best for multi-voltage plug kits
    Check it
  3. 6Minn Kota 1854054 RTA-54 Riptide Electric SteerCheck it
  4. 7Minn Kota MKR-27 Circuit Breaker for TrollingCheck it
  5. 8Bzcovac 1866120 Co-Pilot Remote for Minn Kota

    Bzcovac 1866120 Co-Pilot Remote for Minn Kota

    Best for PowerDrive remote control
    Check it
  6. 9Minn Kota MKR-28 Trolling Motor Plug

    Minn Kota MKR-28 Trolling Motor Plug

    Best for sealed OEM plug and receptacle
    Check it

How the best Minn Kota electric trolling motor parts were compared

We checked fit lists first, because a bracket or prop that does not fit your motor does not help. We then compared included hardware, voltage range, wire gauge and protection ratings.

Mounts were scored on family coverage, deck footprint and exclusions like shaft length and thrust. Plugs were scored on sealing, wire gauge and voltage coverage.

The breaker and remote were scored on protection, control range and compatibility. Thrust and shaft length decide boat control more than any accessory.

The Garmin Force trolling motor review covers a model with integrated sonar and GPS. A motor that is too small for wind or current will work hard, while an oversized shaft can be awkward on a small boat.

Use the families below to narrow the motor, then use these parts to finish the rig. If forward-facing sonar is part of your setup, compare trolling motors for forward-facing sonar before choosing a motor.

Install scope also mattered. A bracket that needs drilling, a plug that needs wire cutting, and a kit that includes splicers and ferrules each ask for a different level of work.

We weighted complete kits higher when the extra parts removed a separate purchase, and noted when a padlock, housing or Co-Pilot system was not included.

What the scores do and do not mean

The score is a guide to fit and completeness for the setups described here, not a ranking of motor power. A high score for a quick release bracket does not mean it fits every Minn Kota, and a high score for a plug does not make it right for every voltage.

Exclusions were treated as hard limits rather than minor cons. Shaft length, thrust, motor diameter and Co-Pilot equipment all decide whether a part works at all, so those checks appear before any preference for material or footprint.

The best Minn Kota electric trolling motor parts for each setup

1

Sunluway For Minn Kota 1854021 Quick Release: Best for Ulterra and Terrova quick release

Sunluway For Minn Kota 1854021 Quick Release, Minn Kota electric trolling motors
9.7/10Our score
  • MKA-21 / 1854021 quick release bracket
  • Fits Ulterra, Terrova, Deckhand 40, PowerDrive and PowerDrive V2
  • Composite construction
  • Low-profile deck plate with locking U handle

A low-profile quick release for Ulterra, Terrova and PowerDrive families that keeps the deck clearer when the motor comes off.

See it on Amazon

Pros

  • Fits the main Minn Kota bow-mount families
  • Composite resists rust and corrosion
  • Locking handle plus padlock hole detail

Cons

  • Not for 72 in or longer shafts
  • Not for 112 lb thrust motors

The Sunluway bracket suits Ulterra, Terrova, Deckhand 40, PowerDrive, PowerDrive V2 and PowerDrive Pontoon owners who want a low-profile base for frequent removal. It replaces OEM part MKA-21, number 1854021, and uses a locking U handle with stainless steel pins to hold the motor on the deck.

Its composite construction resists rust, corrosion and discoloration, which matters in salt water, sun and oxidation from spray. The outer plate mounts to the motor and the inner plate mounts to the deck, so drilling is required for the deck side and the mounting type is bolt-on.

The low-profile design leaves the deck clearer when the motor is off, which helps when you fly-fish, walk the bow or store the motor for transport and security. A padlock hole in the locking pin can help with theft prevention, though the padlock is not included.

It shares the same exclusions as the sixcow RTA-17 bracket: do not use it with shafts 72 inches or longer, or with 112 lb thrust motors.

Sunluway For Minn Kota 1854021 Quick ReleaseCheck it on Amazon
2

HKAIMING Trolling Motor Plug: Best for 12V quick connect power

HKAIMING Trolling Motor Plug, Minn Kota electric trolling motors
9.6/10Our score
  • 12V plug and receptacle
  • 8-gauge marine-grade tinned wire
  • Weatherproof female receptacle
  • Wing tabs on male plug

A weatherproof 12V plug and receptacle that lets you disconnect the motor without hardwiring changes.

See it on Amazon

Pros

  • Weatherproof receptacle with spring closure
  • Thick 8-gauge wire reduces heat
  • Works with Minn Kota, MotorGuide and Newport 12V systems

Cons

  • 12V only
  • Receptacle comes without a housing

The HKAIMING plug suits 12V Minn Kota owners who want a simple quick disconnect at the bow for transport, storage or seasonal removal. It pairs a male plug with a weatherproof female receptacle that has a spring for secure closure in rain and spray.

Thick 8-gauge wire and marine-grade tinned wires help reduce resistance and heat, so the connection runs more efficiently than a thin-wire link. The male plug has wing tabs, and install uses just a screwdriver and wire cutters for the receptacle side.

HKAIMING says it works with Minn Kota, MotorGuide, Newport and other 12V 8-gauge systems. That wider fit helps if you switch motors later, though the plug itself is 12V only and the receptacle comes without a housing.

Compared with the Moestoont kit, this plug is simpler and 12V focused. Compared with the Minn Kota MKR-28, it has less included hardware but a lower-key install for basic 12V rigs.

HKAIMING Trolling Motor PlugCheck it on Amazon
3

Minn Kota Weedless Wedge 2 Prop: Best for weedy water

Minn Kota Weedless Wedge 2 Prop, Minn Kota electric trolling motors
9.5/10Our score
  • Swept-back flared blades
  • Fits 4-inch motor diameters
  • Includes prop nut, pin and washer
  • Impact-resistant composite

A weedless prop that wedges weeds away from the lower unit so you can hold slow speed in vegetation.

See it on Amazon

Pros

  • Patented weedless design
  • Complete install hardware included
  • Holds slow speed in heavy vegetation

Cons

  • Limited to 4-inch motor diameters
  • Prop choice still depends on shaft and motor fit

The Weedless Wedge 2 suits anglers who fish ponds, backwaters, weed edges and shallow flats at slow speed. Its patented swept-back flared blades wedge weeds away from the prop and lower unit instead of wrapping around the hub.

Minn Kota says it powers through heavy vegetation even at slow speeds while conserving battery power for extended run time. That matters because slow-speed weed fishing is where a standard prop often loads up first.

It fits 4-inch motor diameters and includes the prop nut, pin and washer, so install is complete without extra hardware. The impact-resistant composite construction helps against rocks, stumps and underwater obstacles, and the one-pack kit is listed for transom mount or bow mount use.

This prop does not change thrust or shaft fit, so confirm your motor diameter first. For clean water a stock prop may be fine, but in weeds this design keeps you moving at the speed where fish often hold.

Minn Kota Weedless Wedge 2 PropCheck it on Amazon
4

sixcow For Minn Kota 1854017 RTA-17 Quick: Best for RTA-17 replacement fit

sixcow For Minn Kota 1854017 RTA-17 Quick, Minn Kota electric trolling motors
9.4/10Our score
  • RTA-17 / 1854017 quick release bracket
  • Fits Terrova, Ulterra, PowerDrive, PowerDrive V2, Pontoon and Deckhand 40
  • 4 x 6 in base footprint
  • Stainless steel hardware included

A direct RTA-17 style quick release with a small base and included stainless hardware for standard and scissor mounts.

See it on Amazon

Pros

  • Factory-style fit for listed families
  • Small 4 x 6 in base
  • Includes bolts, nuts, washers and spacers

Cons

  • Not for 112 lb thrust or 72 in and longer shafts
  • Drilling required for deck plate

The sixcow bracket suits owners who need the RTA-17 fit, part 1854017, across a wide Minn Kota list. It covers Terrova, Ulterra, PowerDrive, PowerDrive V2, PowerDrive Pontoon, Deckhand 40, Riptide ST and Riptide SP, and works with both standard and scissor bow mounts.

Its base measures 4 by 6 inches with smooth rounded edges, so it leaves a small footprint and is safer to walk over. Stainless steel nuts, washers, bolts and spacers are included, which removes a separate hardware purchase for the bolt-on install.

The U-handle and locking pin let you lift the motor off in seconds with no tools, which helps for stowage, storage or theft prevention. The molded composite is described as UV-resistant marine-grade material for saltwater use, with corrosion-resistant hardware for the locking parts.

It overlaps the Sunluway MKA-21 bracket in fit and exclusions: no 112 lb thrust and no 72-inch or longer shafts. Choose by part number and confirm the list against your exact motor before drilling the deck plate.

sixcow For Minn Kota 1854017 RTA-17 QuickCheck it on Amazon
5

Moestoont Trolling Motor Plug: Best for multi-voltage plug kits

Moestoont Trolling Motor Plug, Minn Kota electric trolling motors
9.0/10Our score
  • 12V, 24V and 48V quick connect
  • 8-gauge copper wire leads
  • Flame-retardant housing
  • Gasketed waterproof cover

A complete male plug and female socket kit built for quick disconnects across 12V to 48V systems.

See it on Amazon

Pros

  • Complete plug and socket kit
  • Heavy-duty 8-gauge leads
  • Waterproof gasketed cover

Cons

  • Two-wire connection limits some installs
  • Confirm wire gauge against your motor draw

The Moestoont plug suits buyers who want one quick-connect kit across 12V, 24V or 48V systems, including many Minn Kota-compatible setups. It includes one male trolling motor plug and one female boat-side socket for bow mount use.

Heavy-duty 8-gauge copper leads help limit voltage drop and heat buildup, which supports more efficient power transfer from battery to motor. The housing is flame-retardant, and a gasketed waterproof cover keeps out moisture, sand and spray.

Install is a simple two-wire snap together after wiring the female socket to the battery and the male plug to the motor. That makes seasonal removal and winter storage faster than hardwired leads, and the kit suits jon boats, bass boats, aluminum boats and small fishing rigs.

It is broader in voltage than the HKAIMING 12V plug, but it is a two-wire connection. Confirm your motor's wire gauge and draw before choosing it, and use our how to wire a 12v trolling motor guide for 12V installs to check polarity and terminal seating.

Moestoont Trolling Motor PlugCheck it on Amazon
6

Minn Kota 1854054 RTA-54 Riptide Electric Steer: Best for Riptide electric steer

Minn Kota 1854054 RTA-54 Riptide Electric Steer, Minn Kota electric trolling motors
9.0/10Our score
  • RTA-54 / 1854054 quick release
  • For Riptide electric steer motors
  • Composite bracket
  • Bow mount

The Riptide-specific quick release for electric steer setups where the standard MKA-21 or RTA-17 may not fit.

See it on Amazon

Pros

  • Made for Riptide electric steer
  • Genuine Minn Kota part number
  • Bow-mount application

Cons

  • Narrower fit than the broader brackets
  • Check shaft and thrust limits before ordering

The Minn Kota RTA-54 bracket suits Riptide electric steer owners whose motor does not use the MKA-21 or RTA-17 pattern. It is part 1854054, black, and made for bow mount use as a genuine Minn Kota quick release.

Minn Kota lists the included component as the RTA-54 Riptide composite quick release bracket, with a 13.2 by 1.4 by 7.2 inch item size in the specs. That genuine part number matters if you want a factory-style fit for a Riptide electric steer setup.

This bracket is narrower in application than the broad Ulterra and Terrova brackets above. It does not cover the wider Minn Kota line, and it should be ordered only when 1854054 is the number your motor calls for.

Check your motor family, part number, shaft and thrust before ordering, since the product data here gives fewer fit details than the MKA-21 and RTA-17 listings. If you run a standard Terrova or PowerDrive, the MKA-21 or RTA-17 brackets are the better match.

Minn Kota 1854054 RTA-54 Riptide Electric SteerCheck it on Amazon
7

Minn Kota MKR-27 Circuit Breaker for Trolling: Best for 60-amp protection

Minn Kota MKR-27 Circuit Breaker for Trolling, Minn Kota electric trolling motors
8.7/10Our score
  • 60-amp protection
  • Manual reset push-to-trip
  • IP67 waterproof
  • Works with 12 to 48V Minn Kota motors

A manual-reset 60-amp breaker that doubles as a power cut-off and protects across the full Minn Kota voltage range.

See it on Amazon

Pros

  • Covers 12 to 48V Minn Kota motors
  • Push-to-trip doubles as cut-off
  • Stainless studs with insulator cap

Cons

  • 60-amp only
  • Size it against your motor's draw

The MKR-27 breaker suits any Minn Kota owner who wants resettable protection instead of replacing a fuse after a fault. It provides 60-amp protection and works with all 12 to 48V Minn Kota trolling motors.

Its manual reset push-to-trip button doubles as a power cut-off switch. That is useful at the dock, during wiring checks or when you need to kill motor power without disconnecting wires.

Minn Kota rates it IP67 waterproof and ignition protected for both freshwater and saltwater use. It includes quarter-inch stainless steel studs with a protective insulator cap for a secure, corrosion-resistant connection, and the single-pole design is listed with a 1-year manufacturer warranty.

The limit is simple: it is a 60-amp breaker. Size it against your motor's draw and battery wiring, because a breaker that is too small will trip under normal load.

For higher-voltage rigs, see our best 36v trolling motor guide before finalizing the wiring plan.

Minn Kota MKR-27 Circuit Breaker for TrollingCheck it on Amazon
8

Bzcovac 1866120 Co-Pilot Remote for Minn Kota: Best for PowerDrive remote control

Bzcovac 1866120 Co-Pilot Remote for Minn Kota, Minn Kota electric trolling motors
8.3/10Our score
  • 1866120 Co-Pilot remote
  • Steering, speed and activation control
  • Waterproof and floats
  • Learns up to 10 units

A floating remote for Co-Pilot equipped PowerDrive motors that puts steering and speed in your hand.

See it on Amazon

Pros

  • Floating waterproof handset
  • Multiple users can be programmed
  • Replaces 2774023 and 2994020

Cons

  • Requires a Co-Pilot system on the motor
  • Limited to listed PowerDrive families

The Bzcovac Co-Pilot remote suits PowerDrive owners who want steering, speed and activation from anywhere on the boat. It is part 1866120, weighs 27.22 grams, and replaces 2774023 and 2994020 for steering and speed control.

The handset is fully waterproof and designed to float, so a drop over the side does not end the day. Bzcovac says the system can learn up to 10 units, which helps when more than one person runs the motor or when you want a spare handset programmed for the same Co-Pilot system.

Fit is specific. It works with Co-Pilot equipped motors only, including Riptide PowerDrive BT from 2017 to 2023, Riptide PowerDrive and Riptide SP from 2007 to 2016 and earlier, PowerDrive BT from 2017 to 2023, PowerDrive V2 from 2007 to 2016, and PowerDrive from 2006 and earlier.

The Co-Pilot system must already be installed on the motor for this unit to function. If your motor has no Co-Pilot, this remote will not control it.

Confirm the equipped list before ordering.

Bzcovac 1866120 Co-Pilot Remote for Minn KotaCheck it on Amazon
9

Minn Kota MKR-28 Trolling Motor Plug: Best for sealed OEM plug and receptacle

Minn Kota MKR-28 Trolling Motor Plug, Minn Kota electric trolling motors
8.0/10Our score
  • Silver plated terminals
  • Threaded secure connection
  • Sealed waterproof design
  • Includes faceplate, dust cap and splicers

A sealed Minn Kota plug and receptacle kit with silver-plated terminals and a full hardware package.

See it on Amazon

Pros

  • Silver plated corrosion-resistant terminals
  • Complete kit with leads and splicers
  • 5-year manufacturer warranty

Cons

  • Larger kit than a simple plug
  • Match wire size to your motor

The Minn Kota MKR-28 suits buyers who want a sealed OEM plug and receptacle with a complete kit for a permanent bow install. It uses silver plated terminals for a reliable corrosion-resistant connection in freshwater or saltwater.

The threaded electrical connection locks in place, and the sealed waterproof design protects the link at the bow through spray and washdown. Included parts run long: plug with 18-inch wire lead, receptacle with 24-inch lead, mounting faceplate, dust cap, 1-10 AWG splicer, ferrules, heat shrink, hex wrench and installation manual.

Minn Kota backs it with a 5-year manufacturer warranty, which is longer than the warranty terms listed for several other parts here. That coverage and the full kit make it a strong choice when you want the OEM parts in one box.

It takes more effort than a simple two-wire plug, so match wire size and splicer range to your motor before cutting leads. For a lighter 12V disconnect, the HKAIMING or Moestoont kits are simpler, and our best trolling motor plug and receptacle 12v guide compares that style of install.

Minn Kota MKR-28 Trolling Motor PlugCheck it on Amazon

Which Minn Kota motor families fit which boats?

The best Minn Kota electric trolling motor family depends on steering, control and hull size. Ulterra and Terrova suit bow-mount boats that need remote or foot control and spot-lock style features.

PowerDrive suits Co-Pilot remote control from anywhere on the boat.

Riptide versions target saltwater use, so check the Riptide ST, Riptide SP and Riptide electric steer fit lists before ordering mounts. Deckhand 40 suits anchor and deckhand-style control on pontoon and similar boats.

Family choice also affects which mount and remote parts in this guide will fit at all. A PowerDrive boat may need a Co-Pilot remote, while a Terrova boat may need an MKA-21 or RTA-17 bracket, and a Riptide electric steer boat may need the RTA-54.

Start with the family, then read the part number on the motor.

Ulterra, Terrova and Riptide bow mounts

These families use the MKA-21 and RTA-17 quick release brackets in this guide. Confirm shaft length and thrust before ordering, since both brackets exclude 72-inch and longer shafts and 112 lb thrust motors.

PowerDrive, PowerDrive V2 and Co-Pilot

PowerDrive owners should confirm Co-Pilot equipment before buying a remote. The Bzcovac 1866120 handset only works on Co-Pilot equipped motors.

Pontoon, Deckhand 40 and scissor mounts

Deckhand 40 and pontoon PowerDrive models appear in the MKA-21 and RTA-17 fit lists. Both brackets work with standard and scissor bow mounts, which helps on boats with limited bow space.

How do thrust, shaft length and voltage change boat control?

Thrust should match boat weight, wind and current, and shaft length should reach the water without excessive length above the deck. A 12V motor suits smaller, lighter boats.

Higher-voltage systems give more headroom for larger hulls and stronger current.

Brushless motors add efficiency and quieter running for buyers who plan long days. Our best brushless trolling motor roundup covers that trade-off before you commit to a bracket and plug.

Voltage also changes which plug and breaker parts are safe to use. A 12V-only plug will not suit a 24V or 36V motor, and a 60-amp breaker must match the motor draw.

Check the motor label first, then match every electrical part to that label.

12V systems

12V setups pair well with 8-gauge plugs like the HKAIMING kit. Keep wire runs short, use a breaker, and confirm amp draw before choosing a plug.

24V, 36V and 48V systems

Higher-voltage rigs need plugs and breakers rated for the system. The Moestoont kit covers 12V to 48V, and the MKR-27 breaker covers 12 to 48V Minn Kota motors.

For 36V installs, use our wiring 36v trolling motor guide.

Shaft length and thrust exclusions

Several quick release brackets here exclude 72-inch and longer shafts and 112 lb thrust. Measure your shaft and check thrust before ordering a bracket, not after.

Measuring shaft and checking thrust

Measure from the mount surface to the prop line with the motor in the water position you will use most. Check the thrust rating on the motor plate or manual, because the bracket exclusion is based on thrust class rather than boat size.

Which quick release bracket fits your Minn Kota?

The right quick release is the one whose part number matches your motor family and shaft. MKA-21, RTA-17 and RTA-54 are not interchangeable, even when they look similar.

Bracket choice is usually a part-number check rather than a preference check. The Sunluway and sixcow brackets cover overlapping families, but they are listed under different OEM numbers, and the RTA-54 is specific to Riptide electric steer.

Order by the number on your motor or manual.

MKA-21 for Ulterra, Terrova and PowerDrive

The Sunluway MKA-21 bracket covers Ulterra, Terrova, Deckhand 40, PowerDrive and PowerDrive V2. It uses a low-profile composite base and a locking U handle.

RTA-17 for Terrova, Ulterra and pontoon models

The sixcow RTA-17 bracket covers a similar list plus Riptide ST and Riptide SP. Its 4 by 6 inch base and included stainless hardware suit standard and scissor mounts.

RTA-54 for Riptide electric steer

The Minn Kota RTA-54 bracket is the specific choice for Riptide electric steer motors. Order it by part 1854054 when that is the fit your motor calls for.

Endura vs Endura Max mounts

If you run an Endura-style transom motor, the mount pattern differs from bow-mount families. Our minn kota endura vs endura max guide helps you confirm the family before buying brackets.

How should you wire and protect a Minn Kota motor?

Use a sealed plug and receptacle, an 8-gauge wire run where the motor calls for it, and a manual-reset breaker sized to the motor draw. That setup gives you quick disconnects and resettable protection.

Electrical protection protects the motor and wiring, not just the battery. A breaker that trips on a fault can prevent heat damage in the leads, and a sealed plug keeps spray out of the connection at the bow.

Both parts should be checked after the first outing and at the start of each season.

Plug and receptacle choice

For 12V only, the HKAIMING plug is simple and weatherproof. For 12V to 48V, the Moestoont kit gives broader voltage coverage.

For a sealed OEM kit, the MKR-28 includes leads, splicers and a faceplate.

Circuit breaker sizing

The MKR-27 gives 60-amp protection for 12 to 48V Minn Kota motors and doubles as a cut-off switch. Confirm the motor draw and battery capacity before choosing it.

Wiring checks before first use

Check polarity, wire gauge, terminal tightness and sealing at the bow. Then check the connection after the first outing, since vibration can loosen terminals if they were not fully seated.

What prop and remote upgrades help most in weeds and on deck?

A weedless prop helps most in vegetation, and a floating remote helps most when you move around the boat. Both solve a daily problem rather than adding top-end speed.

Prop and remote upgrades should be matched to where you fish and how you fish. Weedless props matter at slow speed in cover, while remotes matter when you cast from the stern, net fish or move around the deck.

Neither upgrade fixes a motor that is too small for the boat.

Weedless props for slow speed

The Weedless Wedge 2 fits 4-inch motors and includes the nut, pin and washer. Its flared blades help in heavy vegetation at slow speed.

Co-Pilot remotes for hands-free control

The 1866120 remote controls steering, speed and activation on Co-Pilot equipped PowerDrive motors. It floats, is waterproof, and can learn up to 10 units.

When to skip upgrades

Skip a new prop if you fish mostly open water. Skip a remote if your motor has no Co-Pilot.

Spend the money on a breaker and sealed plug first.

Verdict: best Minn Kota electric trolling motor setup

Pick the Sunluway MKA-21 bracket for broad Ulterra and Terrova fit, the sixcow RTA-17 for that exact part number, and the RTA-54 for Riptide electric steer. Add the HKAIMING plug for a simple 12V disconnect, the Moestoont kit for multi-voltage use, or the MKR-28 for a full sealed OEM install.

Add the MKR-27 breaker for 60-amp protection, the Weedless Wedge 2 prop for weedy water, and the 1866120 remote only for Co-Pilot equipped PowerDrive motors.

Start with the motor family, thrust and shaft that fit your boat, then finish the rig with the mount, plug and breaker above. For your next step, read the trolling motor buying guide and match the voltage guide to your battery system.

Our top 3 picks at a glance

  1. 1 Sunluway For Minn Kota 1854021 Quick Release
    Best for Ulterra and Terrova quick release

    Sunluway For Minn Kota 1854021 Quick Release

    9.7/10 our score

    See it on Amazon
  2. 2 HKAIMING Trolling Motor Plug
    Best for 12V quick connect power

    HKAIMING Trolling Motor Plug

    9.6/10 our score

    See it on Amazon
  3. 3 Minn Kota Weedless Wedge 2 Prop
    Best for weedy water

    Minn Kota Weedless Wedge 2 Prop

    9.5/10 our score

    See it on Amazon

Frequently asked questions

What is the best Minn Kota electric trolling motor family to start with?

Start with the family that matches your steering and control needs. Terrova and Ulterra suit bow-mount use with remote or foot control options, while PowerDrive suits Co-Pilot remote use.

Choose thrust and shaft length for your boat weight, wind and water depth before adding mounts and wiring.

Do I need a quick release bracket?

You need one if you remove the motor for transport, storage, security or deck space. A quick release leaves a low-profile base on the deck and lets you lift the motor off without unbolting it each time.

Confirm shaft length and thrust limits, since several brackets exclude 72 in shafts and 112 lb motors.

What size plug and breaker should I use?

Match the plug and breaker to your motor voltage and amp draw. Many 12V setups use an 8-gauge plug and receptacle, and the MKR-27 here provides 60-amp protection for 12 to 48V Minn Kota motors.

Confirm the motor rating before choosing between a 12V-only plug and a multi-voltage kit.

Which prop helps in weeds?

A weedless prop with swept-back flared blades helps most in heavy vegetation. The Weedless Wedge 2 here fits 4-inch motors and includes the nut, pin and washer.

It helps you hold slow speed without constant weed buildup, though you should still check the prop after fishing in thick cover.